• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.4
• /
• pp.411-420
• /
• 1999

Coastal development and reclamation work make environment of shore destroy, such as rapid change of land use and destruction of wet-land and ocean ecosystem. Therefore new technique to detect change have been needed. This study designed new change detection method and applied to study area. The change detection image and quantitative change area by each classes are calculated. Also, this study can use the basic idea-determination data for coastal development and city plan as the sense of sight by changed images that changed from any land-cover to any land-cover between two dates.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.275-279
• /
• 2004

This study was done to detect the topographic and terrain change of the vicinity of the west coast. To make the basic map of the change in topology and terrain, the mosaic images were made using the images from the satellite, which were given the geometric correction based on the GCP (Ground Control Point) and DEM (Digital Elenation Model) data. The accuracy of the images was examined by .empaling them with CCP through 1:25,000's digital map. After that, among the resultant images of the 1970s and 2000s, those of Sihwa, Hwaong and Ansan, the lands reclaimed by drainage were compared to observe the change in the area. From this study, the accuracy of the images of the west coast from satellite could be acquired and the change of the topology and terrain was detected effectively. From the results, it was known that, in case of the land the topological change was not so big due to the development in the reclaimed land or the bare land. In Sihwa, the size of the land was increased 180 $\textrm{km}^2$ and that of the seashore was decreased 110 km. in Hwaong the size was increased 50 $\textrm{km}^2$ and in Ansan the city space was increased 71 $\textrm{km}^2$ due to the formation of the industrial complex.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.289-295
• /
• 2010

Yangsan fault system is a large fault more than 170km and one of the important structures Geologically that has been create recently in the Korean Peninsula. Debates have been made incessantly and widely throughout the Yangsan fault system because it's a lot of earthquake record. In this study, GPS data that was received from Yangsan GPS station in were processed by the Precise Point Positioning and the movement velocity was calculated by the statistical process about the results, where is the fault zone. The results showed that Yangsan is moving by azimuth angle of $126^{\circ}$ and the velocity of 49mm/year. It is respected that this results will be utilized in basic data about geophysics.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.37-45
• /
• 1991

The purpose of this study is to establish the geodetic control points of GPS in Korea and estimate a measurment ability of GPS for the long baseline. For this, we performed the simultaneous GPS observations at two points in Korea and one point in Japan, and analized the precision of GPS survey according to the data process methods. As the results, three dimensional coordinates of two points in Korea are precisely established on basis of WGS 84 coordinate system and it is demonstrated that the measurement ability of GPS is 0.1 ppm for long baseline. We expect that in the future this result will be used as the basic data for securing the geodetic control points of GPS in Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.199-206
• /
• 2002

The application of GSIS for most route determination is provided by selecting several basic data such as land use, land construction quantity and land price, and then establishing a database to analyze for the route determination. However, this strategy rarely considers the complicated multi-factors that are essential for route determination. To solve this problem, it is required to use the GSIS and attempt to support the decision of majority for optimum route determination and standardize the route determination procedure. Accordingly, in this study, the qualification of multi-factors was attempted using the AHP technique, and so the data for the route determination was provided effectively, which resulted in the optimum route determination. As a result of applying the AHP technique, optimum routes were selected more rationally than randomly applying the values of multi-factors as before.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.311-320
• /
• 1999

This study conducts to analyze comparative accuracy when both Image Transformation Methods and Supervised Classifications on multi-spectral TM using a case of Lower Tumen River Area. In terms of overall classification accuracy, maximum likelihood method turns out higher than other one, but in a case of vegetation only, MNF and TC image transformation methods produce a better quality of the result. Especially, seven dimensional images including MNF, TC, and NDVI create better image than three dimensional one. Among these transformation methods, maximum likelihood method results out the best one. Multi-spectral image could be useful as an important basic material for site selection of industrial allocation as well as Tumen River Area Economic Development Plan.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.157-163
• /
• 2005

In the 21th century as knowledge-based society and according as GIS is embossed, demand of map is increasing rapidly for GIS's basic. Ministry of Construction & Transportation Republic of Korea National Geographic Information Institute who supervise basis geography information run the studies of basis geography information construction, therefore choice of each subject extent and standardization of data model for basis geography information is attained. In this study, framework data has been established in three steps according to Framework data Product Specification in Facility Area. Also the evaluation of usability was implemented as combining Framework data.

• Journal of architectural history
• /
• v.27 no.5
• /
• pp.7-16
• /
• 2018

This study investigated the dimensional plan of Kor Sork temple in Preah Pithu complex, Angkor by civil surveying, 3D scan, measured integer ratio and regularity. According to epitaph and preceding researches, Khmer temples were built based on structural planing with the constant ratio and regularity by using special construct measure scales "Hasta" and "Byama". The study assumed the same unit method was applied in Kor Sork temple and identified the regularity of actual measurement value about the temple. The assumed construct measure scale (Hasta) used for the design of this temple is 413mm. The overall apart arrangement of the temple is different in the East-West direction and the North-South direction. In the East-West direction, the whole scale is 180 hasta, and it is divided into 20 hastas. On the other hands, it was confirmed that the North-South direction is 96 hasta and it was divided four quadrants in 24 hastas. Regarding the detailed design, the regularity according to the constant ratio was confirmed. 7 hasta was used as the basic unit on the first floor and 6 hasta were used as the basic unit on the second floor of the terrace. the basement and the central sanctuary is of 6 hasta and 8 hasta were used as the basic standard.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.4
• /
• pp.655-663
• /
• 2012

Objectives : This study was progressed a research with the aim of using it as basic data necessary for a plan in order to increase qualitatively medical level for patients who feel anxiety about dental treatment, and of offering basic data for improving the whole medical services by grasping conditions and satisfaction level with laser therapy in patients who visited dental clinic. Methods : The statistical analysis was carried out t-test and ANOVA by using SPSS(PASW statistics) 18.0. When there is statistically significant difference in analysis of variance, post-test was carried out by using Duncan multiple range test. Results : In therapy kinds of using laser, gingival treatment was the largest with 37.0%. It was the highest in likely seeming to be not painful with 32.9% as for a decisive factor, which came to receive laser therapy, and in having been enough to endure even if having been slightly tingling as for pain level. Conclusions : This study can be considered to have significance in changing recognition of medical cure by surveying patients satisfaction with using laser as a method for slightly solving elements of fear and anxiety about dental treatment and to have its value as basic data for seeking improvement plan for diverse medical services in the future.

• Journal of Fashion Business
• /
• v.5 no.3
• /
• pp.85-93
• /
• 2001

This study was aimed at reviewing the preceding studies regarding infants' physical characteristics and comparatively examining their apparel specifications among countries, and thereupon, surveying the sizes and specifications of each special infant apparel brand in korea, and thereby, providing for the basic data useful to consumers when they choose infants' apparel sizes and specifications, and at the same time to brand makers for effective exchange of information. Thus, domestic special infant's apparel brands were surveyed for their own sizes and specifications, and thereby, the basic data useful to consumers when they choose their infants' apparel sizes and specifications as well as to brand makers when they exchange information among themselves were produced. The results of this study can summarized as follows: As a result of surveying the general trend of the infant apparel brands in korea, it was found that 5 brands had been established before 1990's, and that the remaining 7 ones had emerged during 1990's. When viewed in terms of brands' originality, it was disclosed that 10 brands were korean originals, while 2 brands were foreign ones licensed. On the other hand, as a consequence of surveying the target age groups of each brand, it was found that the targe age groups differed much ranging from 0 to 72 months or more narrowly from 12 to 24 months, which means that the infant age has yet to be defined for all the brands. In the case of the domestic infant-clothing product respect of inner wear, 8 clothing companies are producing the the outside clothing. In the outside clothing, from 6 months to 36 months' infant is the object, and 6m, 12m, 18m, 24m, 30m, 36m appeared with the fact that it produces in 6 sizes. In the case of the f and the g company which has the difference of size control is big, the f company is producing infant clothing for the age 0 to 72 months in 6 size which the difference of the measurement between the size is a lot to be appear, on the other hand, the g company is producing infant clothing for the age 0 to 6 months in 6 size which the difference of the measurement between the size is small to be appear.