Draping design system organized by European about 13C has been developed greatly for a long while, but for the purpose of the practical use the Dress form similar to human body has been needed. In order to make three-dimensional effect as fitting Muslin ot the Dress form. the Basic lien has to be established in Muslin and Dress form each. At this time, Shoulder-blade level is indicated from various angles : measure down 10cm from the back neck point, a quarter of the back neck point to the waist lie, the half-way point between neckline and bust line, measure down 41 inches from the back neck line, measure down 3 inches from the top edge of the muslin at center back and cross mark for neck line, and so forth. This study established the Basic line through the two ways of them (B.N.P∼B.L/2, B.N.P∼W.L/4), did tight fitting to the 5 kinds of Dress forms which ar normal type in the drop value(the difference between hip circumference and bust circumference), and acquired Basic Pattern. After the experiment, fitness are throughly investigate by statistical analysis of measurements. As a result, this study finds out that fit is proper when shoulder blade level is situated on a fourth of the back neck point to the waist line and a quarter point between back neck point and waist line, and waist dart is situated on the back center line and princess line.
This paper presents an estimating method for local property changes and failure prediction of composite materials experiencing large shear deformation during draping process. The bone plate for the metaphyseal femur fracture was chosen to apply the presented method because it has complex geometry. The local property changes due to macro-/microscopic deformations of fabric composites during draping process were evaluated by various tests and the result was applied to predict static/fatigue behaviors of the bone plate. This paper was expected to present useful information on the design of composite structures with complex geometry and their performance evaluation.
The purpose of the study was to demonstrate how to recreate spencer jacket in the empire style in an attempt to apply this historic style to theatrical costumes and other high fashion items in modern times. The study was carried out through 2 steps. (1)Block patterns of spencer jacket of its basic design were developed through draping based on the design characteristics mentioned above. (2)Spencer jackets of three designs, which were the typical designs of each category have been made of velvet to find out more specific structural characteristics. The structural characteristics of Spencer jacket in draping were as follows: (1)Jacket length position was suitable 9cm below body's bust line and neckline should be enlarged front & side neck point 2cm, back neck point 1.5cm. (2)Cut out the front bodice after CF line moved 1cm outwards and bust dart amount should not exceed 2-3cm. Shoulder point moved inwards. (3)Side back grain line was parallel to princess line of the back bodice. Add 0.5cm ease to the under arm of the front and side bark bodice, it was good for the activity of arm. (4)Armhole line was trued as maintaining to across back width 14-15cm at least. Shoulder line was to connect from the point 2cm depart shoulder point along armhole line to point 2cm side neck point along neck line. (5)Sleeve length was suitable 70cm, cut out the bias direction to move forwards the grain line from shoulder point. Puff position was good from the 2cm depart shoulder point to shoulder line.
The research thesis has been intended to make a comparative analysis on the basic bodice pattern and basic skirt pattern changing on the basis of setting waist line of dress form in an effort to set reasonable standards in selecting the standard lines of drees form. The thesis has made the wearing evaluation by producing the sample of upper and lower dress based on A pattern and B pattern. In details, A pattern functions to keep waist line flatly down from lateral waist-right to posterior waist in a little curved state, paralleling bust line and hipline with waistline. And, B pattern functions to keep waistline, bust line and hipline horizontal paralleling with ground surface. SPSS win 10.1 program was used for the analysis of evaluation and t-test. The result is as follows: For basic bodice-front of upper dress, A and B patterns have made little significant difference. With regard to basic bodice-back, B pattern has got the higher evaluation than A pattern, in the pattern stability and appearance. For basic skirt pattern, A pattern has got the lower evaluation in the aspect of total back appearance, back dart, hip line, and waist line, and front drape. Basic bodice pattern of A pattern, which takes on the different horizontal standard lines of dress form depending on the selection of waistline, and basic skirt pattern has scored less in terms of pattern stability and appearance.
This thesis intends to suggest a new wedding dress pattern through researches on history and changes of wedding dress, researches on silhouette and details and analyses of existing basic patterns. In this study, to develop torso patterns of top dresses selected as preferred designs through literature reviews and company surveys, dress form sizes suitable for standard sizes were selected and study basic patterns were made using draping techniques. The study finds characteristics of body type dimension that is changed when wearing brassiere (hereinafter, 'bra') for wedding dress through customer surveys for development of basic patterns of wedding dress. That is, wearing wedding bra was used for the purpose of increasing the bust size and we will evaluate later whether this increase helps completeness of aesthetic impression through wearing evaluation. As the result, it was found out that top torso pattern wearing wedding bra made wearers feel more comfortable and in the aspect of aesthetic impression, it provided impacts on women's beautiful silhouettes. The effects of whether a bra is used or not on changes in patterns were reviewed through the degree of polymerization of finished patterns. When a bra for dresses was worn, the waist front length increased by1.7cm, the bust circumference increased by 2.1cm, and the amount of dart increased by 1.5cm in the patterns. A new torso pattern for top dresses, which will solve problems evaluated in each of the above from the aspect of composition of pattern by a method through analysis of existing basic patterns and multi-dimensional cut patterns wearing wedding bra, will be suggested.
Journal of the Korea Academia-Industrial cooperation Society
/
v.21
no.4
/
pp.497-508
/
2020
The paradigm focusing on learner-centered classes and the introduction of flipped learning through the connection between online and offline have been increasing. This study proved the educational effect by applying flipped learning to the basic draping course within the fashion practical course and revealed the implications for flipped learning from the instructor's perspective. The research methods are theatrical research and model development research in order to guide basic drape utilizing flipped learning. The study results revealed that learners' satisfaction was very high about the basic draping course combined with flipped learning, and it showed that students were very satisfied with the learning-related video because it can compensate for the decrease in education efficiency according to the number of attendees and improve education. Improvements shall include technical and content supplementation of video learning materials and presentation of documented learning materials, in addition to video materials. From the instructor's perspective, time needs to be set aside for video shooting and editing, a view of the composition of education from the learner's perspective, and an in-depth understanding of the instructor's curriculum for flipped learning design.
The purpose of this study was to develop the pattern of scuba diving suits for local men in their thirties by using 3D body-scanned data. It is widely acknowledged that draping method is more suitable than flat pattern for body shape as most scuba diving suits in the market are designed to fit the body tightly in a single piece with sleeves and legs. A dummy for this study was made based on men's standard clothing sizes in 30's which was derived from data of 2004 Size Korea. Accordingly, the basic body block was built upon through draping method. Next, a scuba diving suit was made from neoprene, followed by fit and the clothing pressure tests in order to evaluate the diving suit's functionality and comfort. The results of the fit test had high points of 4.33 in majority parts except armhole and crotch ones. In comparison of clothing pressure between wearer and dummy, the clothing pressure of wearer was indicated relatively low in most parts other than armhole and knee, resulting from cushion function of skin and muscle and high stretch of fabric.
The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.
The purpose of this research is to develop a basic pattern of corset look taking into consideration characteristics of human body and fit, by transforming 3 dimensional information obtained from draping of standard body type of women in their 20s, which constitute the biggest consumer group of corset look in Korea, on the basis of body shape of women best reflecting 3 dimensional characteristics. In order to develop a corset look pattern suitable for standard body type of women in their 20s, wear tests of A, B, and C types of patterns in terms of the bust in the standard body type that bust circumference 86.7cm and chest circumference 87.0cm were evaluated best. Taking into consideration above findings, fer the purpose of developing a corset look pattern having an excellent fit and reflecting characteristics of Korean women in their 20s with standard body type, a corset look pattern was designed with proper ease calculated by draping incorporated, and through alteration and complementation of such a pattern, a study pattern was produced. This study is expected to provide tips for standard body type women in their 20s with smaller bust circumference to choose clothing allowing for a better fit able to make up for weakness of their body, while presenting to clothing makers ways of designing and size-setting in terms of characteristics of body type of these consumers.
Journal of the Korean Society of Clothing and Textiles
/
v.35
no.11
/
pp.1399-1408
/
2011
This study analyzes the current educational curricula in the field of clothing construction to provide some fundamental information for developing more appropriate educational courses and to activate the fashion business. A total of 82 different departments related to fashion and apparel were selected from four-year domestic universities and the curricula recently posted on their internet websites were analyzed by descriptive statistics. More than half (53.7%) of the 82 departments were offering classes in the clothing construction field for 3 credits and 4 class hours. College affiliation of the departments that offered curricula in the clothing construction field was classified into 5 categories: the arts (34), human ecology (22), natural sciences (14), humanities/culture (9), and others (3). Human ecology category showed the highest results in the average class hours (3.9), the number of classes in the clothing construction field (7.6), and the percentage of the classes in the clothing construction field out of all major classes offered by the clothing department (19.9%). All 82 departments were classified into 3 categories of: fashion design (32), clothing (28), and fashion business (22). The clothing category showed the highest results in the average credits (2.8), class hours (3.8), the number of classes offered by the clothing construction field (7.6), and the percentage of the classes that offer clothing construction education out of all major classes offered by the clothing department (19.9%). The educational contents of clothing construction area were classified into 8 different categories of: basic theory and sewing, clothing construction, flat pattern, draping, tailoring and advanced clothing construction, pattern CAD, sewing science and apparel manufacturing process, and clothing construction for special needs. Among these categories, the draping category constituted 21.7% as the largest part. In addition, the distribution of classes offered by 4 academic years were analyzed into 8 different categories.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.