• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.5
• /
• pp.100-112
• /
• 2011

This paper studied on a theoretical approach to predict structural performances and weight -reduction rates of hybrid bodyshells in case that the material of underframe structure is substituted. To choose other light-weight materials to be substituted for the original underframe material, compressive, bending and twisting deformations are considered under constant stiffness and strength conditions, which derive some new weight-reduction indices from a structural performance point of view. Next, these weight-reduction indices were verified using the finite element analyses of some simplified examples. It is shown that the derived indices to estimate the weight-reduction can be utilized as a good criterion for material substitution of the underframe at a basic design stage.

• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.31-43
• /
• 2008

Introduction of construction cost estimating system is necessary to promote appropriate reflection of construction cost and simplified and efficient amount work. The results of this study are as follows. In the results of considering the basic concept and composition of a construction type estimating system, an example orders are concentrated on an apartment house in the country. The building appurtenant work of extension work is high(1.52) as compared with others. In regression analysis for a construction cost, the models are as follows. In a new construction work, (construction cost)=$12,004.8+4.09{\times}$(building area), and in extension work, (construction cost)=$-121.9+4.50{\times}$(building area). Accordingly, this study wishes to compare and analyzes main contents of original cost method and results cost method, and propose predetermined amount estimation device through existent literature study investigation for accumulation of the construction cost.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1616-1625
• /
• 2019

Measuring occurrence times of random events, aimed to determine the statistical properties of the governing stochastic process, is a basic topic in science and engineering, and has been the subject of numerous mathematical modeling approaches. Often, true statistical properties deviate from measured properties due to the so called dead time phenomenon, where for a certain time period following detection, the detection system is not operational. Understanding the dead time effect is especially important in radiation measurements, often characterized by high count rates and a non-reducible detector dead time (originating in the physics of particle detection). The effect of dead time can be interpreted as a suitable rarefied sequence of the original time sequence. This paper provides a limit theorem for a high rate (diffusion-scale) counter with extendable (Type II) dead time, where the underlying counting process is a renewal process with finite second moment for the inter-event distribution. The results are very general, in the sense that they refer to a general inter arrival time and a random dead time with general distribution. Following the theoretical results, we will demonstrate the applicability of the results in three applications: serially connected components, multiplicity counting and measurements of aerosol spatial distribution.

• Journal of the Korean Chemical Society
• /
• v.67 no.2
• /
• pp.89-98
• /
• 2023

The cell membrane, also known as the biological membrane, surrounds every living cell. The main components of cell membranes are lipids and therefore called as lipid membranes. These membranes are mainly made up of a two-dimensional lipid bilayer along with integral and peripheral proteins. The complex nature of lipid membranes makes it difficult to study and hence artificial lipid membranes are prepared which mimic the original lipid membranes. These artificial lipid membranes are prepared from phospholipid vesicles (liposomes). The liposomes are formed when self-forming phospholipid bilayer comes in contact with water. Liposomes can be unilamellar or multilamellar vesicles which comprises of phospholipids that can be produced naturally or synthetically. The phospholipids are non-toxic, biodegradable and are readily produced on a large scale. These liposomes are mostly used in the drug delivery systems. This paper offers comprehensive literature with insights on developing basic understanding of lipid membranes from its structure, organization, and phase behavior to its potential use in biomedical applications. The progress in the field of artificial membrane models considering methods of preparation of liposomes for mimicking lipid membranes, interactions between the lipid membranes, and characterizing techniques such as UV-visible, FTIR, Calorimetry and X-ray diffraction are explained in a concise manner.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.691-700
• /
• 2023

Purpose: This study aims to analyze the diffusion pattern of the Mongolian mobile phone market. In particular, we used a generalized diffusion model to explore the factors affecting market potenial. Methods: We used three diffusion models to estimate the number of mobile subscribers in Mongolia. Based on the Logistic model with the best fitness, we introduced time-varying market potential and explored the influence of various independent variables such as GDP and inflation. Results: Among the basic diffusion models, the Logistic model was the best in terms of estimation performance and statistical significance. The estimation results of the Generalized Logistic model confirm that investment in the telecommunication sector has a significant positive effect on market potential. The estimation of the Generalized Logistic model effectively describes the continuous growth of the Mongolian telecommunications market until recently. Conclusion: We have analyzed the diffusion pattern of the Mongolian telecommunications market and found that the amount of investment in the sector leads to the growth of the market size. This study is original in terms of its subject - Mongolian telecommunications market and methodology - time-varying market potential.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.65-72
• /
• 2004

A basic access method using for IEEE 802.11a wireless LANs is the DCF method that is based on the CSMA/CA. But, Since IEEE 802.11 MAC layer uses original backoff algorithm (Exponential backoff method), when collision occurs, the size of contention windows increases the double size. Hence, packet transmission delay time increases and efficiency is decreased by original backoff scheme. In this paper, we have analyzed TCP packet transmission time of IEEE 802.11 MAC DCF protocol for wireless LANs using a proposed enhanced backoff algorithm. From the results, in OFDM/quadrature phase shift keying channel (QPSK), we can achieve that the transmission time in wireless channel decreases as the TCP packet size increases and based on the data collected, we can infer the correlation between TCP packet size and total message transmission time, allowing for an inference of the optimal packet size in the TCP layer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.2
• /
• pp.103-111
• /
• 2023

This paper proposes a new data correction technique that transforms anomalies in time series data into normal values. With the recent development of IT technology, a vast amount of time-series data is being collected through sensors. However, due to sensor failures and abnormal environments, most of time-series data contain a lot of anomalies. If we build a predictive model using original data containing anomalies as it is, we cannot expect highly reliable predictive performance. Therefore, we utilizes the LSTM-GAN model to detect anomalies in the original time series data, and combines DTW (Dynamic Time Warping) and GAN techniques to replace the anomaly data with normal data in partitioned window units. The basic idea is to construct a GAN model serially by applying the statistical information of the window with normal distribution data adjacent to the window containing the detected anomalies to the DTW so as to generate normal time-series data. Through experiments using open NAB data, we empirically prove that our proposed method outperforms the conventional two correction methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.502-505
• /
• 2005

Researches about micro technology travel lively in these days. Such many researches are concentrated in the field of materials and a process field. But properties of micro materials should be known to give results of research developed into still more. In these various material properties, mechanical property such as tensile strength, elastic modulus, etc is the basic property. To measure mechanical properties in micro or nano scale, actuating must be very precise. PZT is a famous actuator which becomes a lot of use to measure very precise mechanical properties in micro research field. But PZT has a nonlinearity which is called as hysteresis. Not precision result is caused because of this hysteresis property in PZT actuator. Therefore feedback control method is used in many researches to prevent this hysteresis of PZT actuator. Feedback control method produce a good result in processing view, but cause a loss in a resolution view. In this paper, hysteresis is compensated by open loop control method. Hysteresis property is modeled in Mathematical function and compensated control input is constructed using inverse function of original data. Reliability of this control method can be confirmed by testing nickel thin film that is used in MEMS material broadly.

• Journal of National Security and Military Science
• /
• s.7
• /
• pp.55-89
• /
• 2009

This article aims to critically review recent U. S. RMA-centered theories of warfare having prevailed after the 1991-92 Gulf War upon which the current ROKA military transformation project, the Vision 2020, largely based. In order to evaluate validity as a universal warfighing theory of NCW (Network Centric Warfare) and EBO (Effects-Based Operations), this article reviews the intrinsic strength and weakness of the theories as well as results of several recent wars that the U. S. Army conducted based on doctrines derived form such theories, In addition, this article examines the impact of certain military technology or weapon system in some well-known historical wars to draw lessons regarding the relationship between technology(weapon system) and military victory. Historical examples has shown that victories in war were not achieved by new technologies alone in most cases. Rather military victories tended to owe to combination of new technology, original doctrine and well conceived organization. Although the U. S. Armed Forces showed brilliant records of operational successes anchored on the system of PGMs and NCW concepts in Iraq (1991-92; 2003) and Afghanistan (2001-02), it must be pointed out that the operational successes did not bring about political ones in cases of Iraq and Afghanistan. It reminds us of perils of too technologically tilted approach to the conduct of war. In sum, one ought to recognize that superior technology nowadays became a necessary condition of success but is not yet a sufficient condition, the ROKA needs to be abreast with development trends of military technologies and related theoretical concepts, it need not too be in a hurry in adopting cutting edged war-making technologies at the expense of large amount of budget. The essay recommends for the ROKA several basic requirements for coping with conduct of future wars as well as establishing a 'Korean style military thought'; (1) Recognition of importance of technology in conduct of war; (2) Imposition of officer self-study hours in working days; (3) Establishing a lifestyle of military professionalism in the Korean officer corps; (4) Setting up small or large groups of think-tanks that are specialized in army doctrinal formulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.50-58
• /
• 2009

Fourth generation mobile communication network have the technology of extensive form include basic service technology and it has been developed from the radio access technology and network topology. Not only fourth generation mobile communication network have basically done new highspeed radio access technology which is suitable to high and low speed environment of transfer, but also it is possible that they have been made for freely vertical handover. ETRI also has made fourth generation mobile communication network which is WiNGS(Wireless Initiative for Next Generation Service) satisfied that demand. This paper is made by lossless handover method through the local retransmission ARQ agent that is one of the main technology of fourth generation mobile communication network. Lossless handover method through local retransmission ARQ agent has been basically made by WiNGS and it was better than original local retransmission of layer by simulation.