• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1621-1628
• /
• 1990

Numerical solutions are presented for the heat transfer from radiating and convecting fins. Consideration is given to thin, annular fins attached to a tube surface for which the temperature is constant. Fin to fin, fin to base, and fin to environment radiative interactions are considered. It is assumed that the radiating surface is diffuse-gray, the environment is black, and the surrounding fluid is transparent. The radiation terms are formulated by using Poljak's net-radiation methoad. The mathematical description of the simultaneously heat transport by conduction, convection, and radiation leads to a nonlinear integro-differential equation. This has been solved for a wide range of the pertinent physical parameters by using finite difference method and iteration method based on the Newton-Raphson technique. The temperature distributions, heat transfer rates, fin efficiencies, and fin effectivenesses are presented in dimensionless form. The results definitely indicate that the use of fins leads to a significant increase in heat transfer compared with the unfinned tube.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.31-38
• /
• 2012

In this paper, we propose a method to improve cell edge users' performance in HetNet (heterogeneous network) systems by cooperatively transmitting signals using remote radio heads (RRHs) located near coverage boundaries, referred to as edge RRHs. The proposed method locates the edge RRHs in specific locations of the cell boundary and provides an efficient operational strategy by adjusting the duty cycle of the edge RRHs and base stations. The effectiveness of the method is demonstrated by experimental performance based on the system model parameters of the CoMP (coordinated multi-point transmission and reception) scenario, which is discussed in LTE-Advanced (Long Term Evolution - Advanced) standard contributions. When compared with conventional methods, utilization of edge RRHs is especially advantageous for the performance improvement of lower percentile users in terms of average throughput and effectively improves the fairness among users.

• Corrosion Science and Technology
• /
• v.9 no.2
• /
• pp.57-66
• /
• 2010

Since nuclear power plants are being operated under high temperature and high pressure, on-line monitoring technique to detect corrosion could be more effective than off-line method in shut-off period. In this operating condition, electrochemical noise method may be suitable to monitor the corrosion. This paper aims the analysis on the relation between the cracking and electrochemical noise signal of Alloy 600 under U-bending. When electrochemical noise monitoring technique was used during SCC test, it was judge to be obvious that if cracks generate, its generation can be detected by electrochemical current noise. Cracking-related noise was defined as the noise showing 5~10 times greater than the average value of background noise bands. On the base of crack noise, crack initiation time was determined. From SCC test and electrochemical noise monitoring in $25^{\circ}C$, 0.1 M $Na_2S_4O_6$ solution (Reverse U-Bended Alloy 600 SE+), average crack initiation time was obtained as 9,046 seconds and from its initiation time, it could be defined that net crack propagation rate is the crack length divided by ${\Delta}T$(= total test period - crack initiation time). Therefore, average net crack propagation rate was obtained to be $1.18{\times}10^{-9}\;m/s$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.961-970
• /
• 1997

A numerical method is presented to predict and analyze the shape of a growing billet produced from the "spray forming process" which is a fairly new near-net shape manufacturing process. It is important to understand the mechanism of billet growing because one can obtain a billet with the desired final shape without secondary operations by accurate control of the billet shape, and it can also serve as a base for heat transfer and deformation analysis. The shape of a growing billet is determined by the flow rate of the alloy melt, the mode of nozzle scanning which is due to cam profile, the initial positio of the spray nozzle, scanning angle, and the withdrawal speed of the substrate. In the present study, a theoretical model is first established to predict the shape of the billet and next the effects of the most dominent processing conditions, such as withdrawal speed of the substrate and the cam profile, on the shape of the growing billet are studied. Process conditions are obtained to produce a billet with uniform diameter and flat top surface, and an ASP30 high speed steel billet is manufactured using the same process conditions established from the simulation.imulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.68-75
• /
• 2013

Recently IPTV that transmits multimedia contents in real time through internet, cable TV net and satelite net gets the limelight. But IPTV service that gives service to users by various media has a problem of not supporting user certification fully. This paper suggests a certification model which prevents getting access permission of IPTV service by sending illegal certification information by adolescent through integrating mobile communication technique with RFID(Radio Frequency IDentification) technique which is a key technique of Ubiquitous environment. This model performs the process of adult certification by keeping synchronization with user's certificaiton information that is saved in data-base of certification server and contents server after getting the system of class categorization in contents server to overcome disadvantage of simple adult certification system that is popular in the existing internet. Also, it adapts double hash chain technique not to down load illegally contents without the permission of manager even if an adolescent gets manager's approval key.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.335-346
• /
• 2004

PtolemyII is an environment that supports heterogeneous modeling and design of concurrent systems such as embedded system. PtolemyII has several Domains which are physical rules to determine the way of communicating between components. PtolemyII has 11 domains such as PetriNet, Timed Multitasking, SR etc. Components of System can be specified using appropriate domains for their properties. Communicating Sequential Processes(CSP) is implemented as formally designed CSP domain, in PtolemyII. But CCS didn't be implemented as a domain. It is a kind of Process Algebra language which can be used for specifying and verifying concurrent systems formally. Thus, in this paper we implemented CCS domain. And that permitted developers using PtolemyII to use the same modeling pattern used in PtolemyII and to make system specifications in the base of the formal semantics of CCS. This caused the diversity of PtolemyII domains and the power of expression was improved. This paper will explain the structure of CCS domain implemented in PtolemyII and the way of implementing it.

• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• The Journal of the Korea Contents Association
• /
• v.22 no.8
• /
• pp.274-287
• /
• 2022

Competition in the broadcasting market is intensifying as OTT services are spreading. And Korea is positioned as a competent international contents supply base. This can be helpful for the domestic contents production industry. However, it can result in being incorporated as a subcontractor in the global video industry. Therefore, it is necessary for Korean OTT operators to expand their market upto overseas and maintain competitiveness by linking content competitiveness to the sales expansion. This study was conducted to reduce the risk and encourage implementation through feasibility analysis of overseas business of domestic OTT operators. The North American market was selected as a region with high potential through in-depth interviews with experts and literatures review. And it was confirmed that the partnership with local platform is effective. Then, the sales and input costs were estimated, and business was evaluated using the net present value method. Totally 18 scenarios were created using multiple estimates for copyright cost, subscribers, and rate, which are highly uncertain. From the analyses, 8 scenarios were found to be acceptable. And copyright cost has the greatest impact on business success, followed by rates and subscribers.

• Journal of Industrial Technology
• /
• v.9
• /
• pp.21-28
• /
• 1989

For the study of the fatigue behavior, high-strength bolted connections on a small scale were manufactured, and carried on fatigue tests. Its experimental values were analysed by stress-fatigue life (S-N) curve. Three types of specimens : the base metal, the cireular hole and the welded sperimens had same net section were made. Through the same tests those experimental values were compared with those of the high-strength bolted conneetions. The results of these studies are as followings. It was found that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the high-strength bolted conneetions were much more about 14% and 16% than that of the base metal specimen. It was thought that this trend was due to frictional force increasing fatigue strength. It was known that fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the welded joints were less 29% and 21% than that of base metal specimen. It was thought that that trend was due to weld flaw. It was appeared that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the high-strength bolted connections were much more about 38% and 30% than that of welded joint. It was thought that it was due to both frictional force increasing the fatigue strength in bolted connections and weld flaw decreasing the fatigue strength in welded connections. It was found that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the B3 specimens were much more 2% and -2% than that of the B4 specimen. It was thought that that trend was due to the frictional force, which concerned with shape of specimen. It was known that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the specimen with circular hole was less 61% and 65% than that of base metal. It was known that the allowable stress for bolted joint was higher than that of welded Joints. If that research is continued and more data are accumulated it can be expected that a basic pattern to provided the indicator of the fatigue design of the bolted connections of steel structures and persume the safety and lifeproof of existing structures is given.

• Journal of Korean Elementary Science Education
• /
• v.33 no.4
• /
• pp.674-682
• /
• 2014

This study aims to analyze STEAM-related articles and to look into the trend of research to present implications for research directions in the future. To achieve the research purpose, the researcher searched by key words, 'STEAM' and 'Convergence Education' through the RISS. Subjects of analysis were titles of 181 articles in journal articles and conference papers published from 2011 through 2013. Through an analysis of the frequency of the texts that appeared in the titles of the papers, key words were selected, the co-occurrence matrix of the key words was established, and using network maps, degree centrality and betweenness centrality, and structural equivalence, a network text analysis was carried out. For the analysis, KrKwic, KrTitle, UCINET and NetMiner Program were used, and the results were as follows: in the result of the text frequency analysis, the key words appeared in order of 'program', 'development', 'base' and 'application'. Through the network among the texts, a network built up with core hubs such as 'program', 'development', 'elementary' and 'application' was found, and in the degree centrality analysis, 'program', 'elementary', 'development' and 'science' comprised key issues at a relatively high value, which constituted the pivot of the network. As a result of the structural equivalence analysis, regarding the types of their respective relations, it was analyzed that there was a similarity in four clusters such as the development of a program (1), analysis of effects (2) and the establishment of a theoretical base (1).