• Earthquakes and Structures
• /
• 제17권3호
• /
• pp.245-256
• /
• 2019

An experimental study was conducted to evaluate the dynamic behavior of a free-standing frame equipped with a movable base system using cast iron and mortar as the bearing materials. The preliminary friction test indicated that a graphite layer developed on the interface and exhibited stable friction behavior. The friction coefficient ranged from 0.33 to 0.36 when the applied normal compression stress ranged from 2.6 to 5.2 MPa. The effect of the variation of normal compression stress would be small. Shaking table tests on the free-standing frame showed that rock, slide, and rock-slide responses occurred. The cumulative slide distance reached 381 mm under JMA Kobe wave excitation; however, only a few cyclic slides occurred at the same locations along the moving track. Most surfaces sustained single slides. Similar results can be observed in other shaking conditions. The insufficient cyclic sliding and significant rocking resulted in a few graphite layers on the mortar surfaces. Friction coefficients were generally similar to those obtained in the preliminary friction tests; however, the values fluctuated when the rocking became significant. The collisions due to rocking caused strong horizontal acceleration responses and resulted in high friction coefficient. In addition, the strong horizontal acceleration responses caused by the collisions made the freestanding specimen unable to reduce the input horizontal acceleration notably, even when slippage occurred. Compared with the counterpart fixed-base specimen, the specimen equipped with the iron-mortar base could reduce the horizontal acceleration amplification response and the structural deformation, whereas the vertical acceleration response was doubled due to collisions from rocking.

• Structural Engineering and Mechanics
• /
• 제53권1호
• /
• pp.57-71
• /
• 2015

This study investigates the feasibility of retrofitting an existing building by connecting the existing building to a new building using connecting dampers. The new building is base-isolated and viscoelastic dampers are assigned as connecting dampers. Scaled models are tested under three different earthquake records using a shaking table. The existing building and the new building are 9 and 8 stories respectively. The existing building model shows more than 3% increase in damping ratio. The maximum dynamic responses and the root mean square responses of the existing building model to earthquakes are substantially reduced by at least 20% and 59% respectively. Further, numerical models are developed by conducting time-history analysis to predict the performance of the proposed seismic mitigation system. The predictions agree well with the test results. Numerical simulations are carried out to optimize the properties of connecting dampers and base isolators. It is demonstrated that more than 50% of the peak responses can be reduced by properly adjusting the properties of connecting dampers and base isolators.

• 한국전자거래학회지
• /
• 제9권4호
• /
• pp.117-136
• /
• 2004

치열한 경쟁 환경 하에서 빠른 시간 안에 고객이 원하는 제품을 생산해야 하는 즉, 시장 출시까지의 시간 (time to market) 단축의 필요성이 더욱 높아짐에 따라, 제품 설계 시에 협업(collaborative) 설계와 편집(configuration) 설계의 중요성이 커지고 있다. 이를 위해서 효율적인 부품 검색 방법이 필요하고, 그 방법의 하나로써 전자 카달로그 (e-Catalog)가 많이 사용된다. 편집설계를 통한 설계 모델 재사용을 위해서는 파라메트릭 정보가 필수적이다. 따라서 전자 카달로그는 파라메트릭 (parametric) 정보가 포함된 CAD 모델 라이브러리를 제공해야 한다. 그러나 제품의 구성에 따라 무수히 많은 조합이 존재하기 때문에, 기존의 방법으로는 파라메트릭 CAD 모델 라이브러리를 구축하기가 어렵다. 예를 들어, 몰드베이스 종이 카달로그의 한 페이지에는 8000만개 이상의 조합이 존재한다. 이와 같은 문제를 해결하기 위해서, 본 논문에서는 파라메트릭 CAD 모델 자동 생성을 위한 테이블 파라메트릭 (table parametric) 방법을 제안하고, 테이블 파라메트릭 모델을 선정하는 방법과 설계 파라메트릭 세트를 구성하는 방법에 대해서 설명한다. 테이블 파라메트릭 방법을 적용하게 되면, 전자 카달로그 시스템의 분류체계와 테이블 파라메트릭 모델의 설계 파라메터 세트 (design parameters set) 와의 매핑을 통해, 모든 조합의 몰드베이스 CAD 모델을 자동으로 생성할 수 있다.

• 한국식품영양과학회지
• /
• 제23권5호
• /
• pp.774-783
• /
• 1994

New food item numbers for each food included in Food Composition Table in Korea (4th ed) and other Food Composition Table. New Food item numbers classified to base 5-basic food groups and its classification was as follows. 1 As for the 1569 food items , they were classified as 20 food sub-groups(82 food sorts) for 5-basic food groups. 2. As for the 82 food sorts, they were individually classified with raw prepared , fat sugar content and arranged in order, ㄱ , ㄴ and ㄷ and made the item number. 3. The data set of nutritive value of food with new item numbers was accessed on computer files. 4. The Food & Description Table was drafted as 1572 food items were arranged in order, ㄱ, ㄴand ㄷ. 5. The Food Table arranged in the order or each nutrient content (energy, carbohydrate, protein , etc....) was drafted. Clipper program for computing nutritive values and tabulation of nutrients of daily diet were coded by applying new food item numbers. It is expected that should utilized as a basic data of computer program for calculating the nutritive value of diet, evaluating the nutrition and counseling the nutrition.

• 자원환경지질
• /
• 제28권2호
• /
• pp.165-176
• /
• 1995

Dongrae is one of the most famous hot spring resort area in the Republic of Korea. The water temperature ranges $50^{\circ}C{\sim}66$. The chemical composition of the thermal water is quite different from normal groundwater. $Na^+$ and $Cl^-$ are the main components, measured more than 75%, $Ca^{+{+}}$ is contained about 22% and the other ions such as $SO_4$ or $HCO_3$ are the minor components. The heat source is uprising along the fracture zone of granite which is indicated as a subsurface high temperature belt. During the research period of 1991~1992, the groundwater table was lowered down to the depth of about 100 m according to continuous increase of daily use of thermal water. The groundwater table was fluctuated with an amplitude of day, weak or seasion. The groundwater table was the lowest at 18:00 h in a day and also lowest at the weekend for the week period. There was a relavent relationship between drawdown and the amount of thermal water use on a long term base. To protect such a rapid drawdown of groundwater table, Dongrae resort area is now asked to take strong municipal control for the daily use of thermal water.

• 전력전자학회논문지
• /
• 제3권4호
• /
• pp.388-398
• /
• 1998

퍼지제어시스템에 영향을 미치는 요소들은 제어규칙, 소속함수, 퍼지추론, 비퍼지화 그리고 이 출력이득요소 이다. 구성요소들 각각에 의한 동조방법은 요소들 중 일부만을 동조하기 때문에 동조대상 이외의 요소들에 대한 오류와 파라메타의 부적절한 설정등에 의해 적절한 동조가 이루어지지 못할 수 있으며 각 요소들간의 상관관계를 고려하여 동조를 수행해야 하는 어려움이 있다. 입 출력단에서 작용하는 이득요소들은 제어시스템에 직접적인 영향을 미치기 때문에 이들의 선정은 신중을 기해야 한다. 본 연구에서는 퍼지제어시스템의 동조를 위한 제어기 스스로 입 출력이득요소를 산출하는 방법과 퍼지제어기의 구성요소들에 의해 얻어진 초기의 제어값들을 원하는 목표치에 빨리 수렴할 수 있도록 동조하는 방법을 제안하였다.

• 지능정보연구
• /
• 제5권1호
• /
• pp.13-34
• /
• 1999

Building a knowledge base effectively has been an important research area in the expert systems field. A variety of approaches have been studied including rules, semantic networks, and frames to represent the knowledge base for expert systems. As the size and complexity of the knowledge base get larger and more complicated, the integration of knowledge based with database technology cecomes more important to process the large amount of data. However, relational database management systems show many limitations in handing the complicated human knowledge due to its simple two dimensional table structure. In this paper, we propose Object-Oriented Knowledge Store (OOKS), a knowledge base model on the basis of a frame sturcture using an object-oriented database. In the proposed model, managing rules for inferencing and facts about objects in one uniform structure, knowledge and data can be tightly coupled and the performance of reasoning can be improved. For building a knowledge base, a knowledge script file representing rules and facts is used and the script file is transferred into a frame structure in database systems. Specifically, designing a frame structure in the database model as it is, it can facilitate management and utilization of knowledge in expert systems. To test the appropriateness of the proposed knowledge base model, a prototype system has been developed using a commercial ODBMS called ObjectStore and C++ programming language.

• 한국도서관정보학회지
• /
• 제36권4호
• /
• pp.133-153
• /
• 2005

이 연구는 KDC의 패싯 구조를 분석하여, 앞으로 반영할 수 있는 조합식 분류체계를 제안하는 것이다. KDC는 십진식 체계들이 사용하는 조합식 구조를 수용하고 있으나, 앞으로 표준구분의 적용을 분명하게 하고, "기본기호 $\~$에 $\~$구분표의 기호$\~$를 사용하여 $\~$구분한다"와 같은 지시를 사용하여 전개할 수 있도록 하고, 조기표의 활용 방법과 내용을 수정 확장하고, 내부 보조표를 마련하여 특정 류에 공통적으로 적용할 수 있는 구조를 도입하는 것이 바람직하다.

• 한국도서관정보학회지
• /
• 제38권4호
• /
• pp.529-546
• /
• 2007

이 연구는 KDC 제5판의 개정 내용을 제안하는 것이다. 개정되는 제5판은 조합식 구조를 전제로 다양한 합성방법을 사용하는 것이 필요하다. 또한 부가표의 신설, 주기의 다양화, 보조표의 전개를 확대하고, 기호 합성방법은 "기본기호 $\sim$에 $\sim$표의 기호 $\sim$을 합성한다." 형식의 주기를 일관성 있게 사용하고 실질적인 보조표의 역할을 할 수 있도록 개정할 것을 제안한다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.351-358
• /
• 1999

The base-isolation technology is to set up LRB between the base of a building and the ground to protect the building from seismic force. As Korea belongs to the region of moderate or weak seismicity it is more resonable to apply the base-isolation technology of LRB in the field of the response reduction of equipments under machine or transportation vibrations than in the field of seismic response reduction of buildings, In this paper small-scale LRB's designed for the response reduction of equipments are manufactured and tested for thier performance. The shaking table test is conducted to analyze the characteristics of LRB such as the variation of natural frequencies damping ratios and equipments responses.