• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.596-600
• /
• 2005

In High-speed Portable Internet system to improve performance of whole system, adaptive modulation and coding technology is used, this technology changes modulation and encoding techniques depending on wireless channel environment. Modulation technology that is used in High-speed Portable Internet system is BPSK, QPSK, 16QAMs and 64QAMs. If terminal is distant from base station transceiver system, BPSK or QPSK technology Is used and 16QAMs or 64QAM technology is used if is near in the base station transceiver system. In this paper, number of sub-channel in each modulation technology minimized total transmitting number of PDU is analyzed for efficient radio resources usage. For this, simulation is conducted and the results are presented at High-speed Portable Internet system environments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.438-443
• /
• 2006

In this paper, We had proposed SDR module, and designed FPGA to compose with channel separation of broadband CDMA signal what have multiple FA. At decomposition and composition process of multiple FA CDMA signal, system only progress decomposition and composition of channel selected by software. Therefore, proposed system can manage base station transceiver system very effectively than the other way what send on all band of multiple CDMA signal. Also, it is possible that system sets again coefficient of each filter because it is consisted of SDR module. Therefore, we can easily control coefficient each filter according to base station transceiver system environment.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.258-262
• /
• 2009

A Practical application of environmental monitoring system based on wireless sensor node network with the core of embedded system STR711FR2 microprocessor is presented in the paper. The adaptable and classifiable wireless sensor node network is used to achieve the data acquisition and multi-hop wireless communication of parameters of the monitoring base station environment including repeaters. The structure of the system is proposed and the hardware architecture of the system is designed, and the system operating procedures is proposed. As a result of field test, designed hardware platform operated with 50kbps bit rate and 5MHz channel spacing at 2040Hz. The wireless monitoring system can be managed and swiftly retreated without support of base station environmental monitoring.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.91-98
• /
• 2012

This paper implements 2X2 MIMO Long Term Evolution (LTE) base station using Software defined radio (SDR) technology. The implemented base station system processes baseband signals on a Graphics Processor Unit(GPU). GPU is a high-speed parallel processor which provides very important advantage of using a very powerful C-based programming environment that is Compute Unified Device Architecture (CUDA). The implemented software-based base station system processes baseband signals through GPU. It utilizes USRP2 as its RF transceiver. In order to guarantee a real-time processing of LTE baseband signals, we have adopted well-known signal processing algorithms such as frame synchronization algorithms, ML detection, etc. using GPU operating in parallel processing.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.211-214
• /
• 2007

Development of IT and electronics industries has make our life more convenient, yet at the cost of radio communication noise, malfunctioning of electronic appliance and risks against human health all resulting from EMI. Many states are tightening their EMI (Electro Magnetic Interference) regulations around the world and the EMI regulatory measures are likely to increase in terms of targets and types. Against this backdrop, this paper aims to introduce fundamental and adequate EMI countermeasures encompassing product production cycle from design to production stage.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.667-670
• /
• 2004

In this paper, we have presented the improved IF transceiver architecture and the implementation and experimental results on re-configurable transceiver based on digital IF for multiple wideband OFDM/TDD base stations for high-speed portable internet-service in which is issued Korea. The implemented IF transceiver has been designed to support multiple frequency allocations and multiple standards by only modifying the programmable software not its hardware like as the software-defined-radio concept. Also, the digital complex quadrature modulation technique has been used for the digital IF transmitter, which is able to combine multiple frequency bands in digital processing block not RF block and to reject the image frequency signals. And the bandpass sampling technique has been used for the digital IF receiver to reduce the sampling rate of ADC. This paper has shown the experiment results on the frequency response and constellation on the base-station implemented using the modified IEEE 802.16a/e physical layer channel structure based on OFDM/TDD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1677-1685
• /
• 2001

In this paper, we propose a call admission control scheme that can be performed within guaranteeing of required QoS(Quality of Services) in DS-CDMA(Direct Sequence-Code Division Multiple Access) reverse link. It has been performed rely on a physical channel numberonly and based on quality of received signal from MODEM(modulator/demodulator) part in established study. In other methods, the standard for services would have been set from statistical analysis of users\` location and using received power level in BTS(Base Transceiver Station). These ways bring about not only system loads but time delay or great differences from real environment. To solve these problems, we propose a call drop rate estimation algorithm for the purpose of call admission control based on measured value at LNA(Low Noise Amplifier) ports of BTS(Base Transceiver Station) in real time. This method proposed in this paper estimates a quality of offered service in real time, reduce system loads and shorten time delay which is needed to determine the standard for call admission control. But it requires a additional 17W complexity which can measure received signal power in BTS and estimate call drop rate.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.1
• /
• pp.11-24
• /
• 2022

Open Radio Access Network (O-RAN) standard has been proposed to separate the baseband signal processing unit from the Radio Frequency (RF) unit at base station system mainly for reducing the cost of base station systems through open-source interfaces between the two units. To satisfy the performance metrics in various scenarios, several fronthaul functional split options were presented by O-RAN. Amongst these options, the split option 7-2x is widely adopted in practical applications due to its excellent trade-off between the required bandwidth and RU overhead. In this paper, we present a hardware implementation of a base station system that is compliant with the Category B of O-RAN split option 7-2x. It consists of O-DU and O-RU implemented with a commercial off-the-shelf Digital Signal Processor and RF transceiver, respectively. The performance of the proposed base station system is evaluated in terms of Bit Error Rate and received signal power as well as the required fronthaul bandwidth. Through various experimental tests, we have observed that the proposed system reduces the fronthaul bandwidth nearly by 89.7% compared to the conventional system that dose not employ the O-RAN standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.333-341
• /
• 2002

This article is written to make a foundation for effective radio network engineering by enabling the accurate traffic assumption between Base Station (BTS : Base Station Transceiver Subsystem) md Repeater through the scientific and systematic analysis of mobile traffic dealt within CDMA Base Station. Among these, Repeater, having direct physical connection with BTS, simply does the remote relay function but the volume of the traffic flowed into the repeater is not accountable. The total BTS traffic is the sum of traffic dealt by the BTS and multiple Repeaters. In this article, we tried traffic analysis of this kind by adopting RTD (Round Trip Delay) which is specially designed to measure distribution of the distance between the Base Station and the Mobile station by differentiating the traffic dealt by BTS from traffic dealt by Repeaters. The fact that the connection between mobile station and BTS via Repeater (which is located remotely) yields far more delay than the direct connection between mobile station and BTS is the clue of this article. Based on this fact, Time Delay equipment was put at the receiving side of the Repeater to add certain amount of delay to the traffic to BTS and the result showed that the 99.78% of the traffic can be identified.