• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.364-367
• /
• 2007

We combined CC2431(Chipcon, Norway), as the platform for the Indoor Location Tracking, which follows Zigbee/IEEE802.15.4 standards in RSSI (Received Signal Strength Indicator) and Base Station Node and then, embodied Indoor Location Tracking System. CC2431 is composed of the Reference Node that transfer its current position at the designated place and the Blind Node. The Blind node receives the current position(X and Y coordinates) of the Reference Node fields which are being contiguous and also, calculates its current position and transfers it to the Base Station Node. The base station node is used for receiving the current position of blind node and passing its data to the PC as a gateway. We can make sure where is the Blind Node not only from the out-of-the-way place of the server side but from the outside in a real-time.

• Journal of the Korea Convergence Society
• /
• v.2 no.1
• /
• pp.7-13
• /
• 2011

Informations of multimedia centering in the images, are combined acoustic and letter, etc. Although the network advances and the capacity of the storage media extends, these huge informations will not be able to accommodate. From meaning which is like this, International standards for the compression and a multiplexing of image, acoustic and voice H261 where admits standard, JPEG, JBIG, MPEG-l, MPEG-2, MPEG-4 and H263, G series etc, are core techniques of multimedia. At initial step of the base technique which creates the base of like this multimedia service time, we developed the real-time MPEG-4 transmission systems to provides real-time MPEG-4 multimedia services. This system means becomes the base technique which hereafter is developed and is applied various system. This system Will be able to apply from a videoconference, a building protection system and a VOD video system to use the Internet. And, They, the image sensing, embedded linux, and MPEG4 software, will become sourceful technique to develop the different system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.335-341
• /
• 2008

The SDR(Software Defined Radio) system for hardware and software must be an open structure to various system standards. It should also provide a capability of distributed processing, object-orientedness, and software controllability. It implies that the software to be used in the SDR system should provide the openness such that it can operate independently of a given hardware platform. In order to achieve these goals, the SDR system tends to modularization for increasing hardware reuse and design flexibility, which provides the system reconfigurability. In this paper, we implemented a base station with proposed an open architecture of a Smart Antenna Base Station(SABS) and Smart Antenna APIs[10] operating in SDR network in such a way that the architecture itself is suitable for the entire system to maintain the openness, object-orientedness, and software controllability.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.4
• /
• pp.157-165
• /
• 2019

Recently, lean duplex stainless steel, STS329FLD with less nickel (reduced to 0.5~1.5%) has been developed as a substitute of austenitic stainless steel (8%~10.5% nickel in STS304) and included in Korean standards (KS). This paper investigates the block shear behavior of cold-formed duplex stainless steel (STS329FLD, nominal plate thickness of 1.5mm) fillet-welded connection with base metal fracture. Main variables are weld lengths in the longitudinal and the transverse directions of applied force ranged from 20mm to 50mm. As a result, specimens failed by typical block shear facture (the combination of gross section tensile fracture and shear fracture or shear yielding) and ultimate strength of the specimens got higher with the increase of weld length. Block shear fracture strengths predicted by current design specifications (KBC2016/AISC2016 and EC3) and existing proposed equations for welded connections by Topkaya, Oosterhof & Driver and Lee et al. were compared with test strengths. KBC2016/AISC2016 and EC3 design specifications underestimated block shear strength of STS329FLD welded connections by on average 24%, 29%, respectively and Oosterhof & Driver, Topkaya and Lee et al's equations overestimated the ultimate strength of the welded connection by the range of 3% to 44%.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.4
• /
• pp.41-48
• /
• 2022

The purpose of this study is to present the implications of the rural living area setting and rural spatial structure analysis of the rural spatial strategy plan through case analysis. Following the decentralization of autonomy and the promotion of the transfer of state affairs to local areas, some of the general agricultural and fishing village development projects of the Ministry of Agriculture, Food and Rural Affairs were transferred to local areas. In addition, in 2020, the Ministry of Agriculture, Food and Rural Affairs introduced a rural agreement system for 113 cities and counties. However, since the understanding of the field is still low, this study attempted to present implications through a case analysis of the structure of rural space and the establishment of rural living areas in three local governments in Chungcheong. As a result of the study, in the stage of establishing the living zone, it is necessary to comprehensively review the contents reviewed in the analysis of the current status and conditions. However, the two local governments had insufficient interpretation of the axis by function and the establishment of the base area, or were using the upper plan as it was. Second, the source of the data used in the survey on the distribution status of living SOC facilities is unclear. Since the distribution status of living SOC facilities overlaps with accessibility analysis, OD data analysis, and resident survey results and is used as the basis for setting living areas, the data source should be clearly marked, and verification should be possible. Third, amenity (facility) resources were classified and analyzed according to the conditions and characteristics of local governments. The local government that applied the guidelines as they were was A local government, and the remaining local governments conducted surveys and analysis according to the current status. Forth, since the establishment of the rural living area is the minimum unit supported by government policies through future rural agreements, it is necessary to distinguish them based on quantitative standards in the process of establishing them. Only one case area presented clear grounds and standards, and the rest of the case areas presented standards but are based on non-quantitative standards. In order for rural agreements to be sustainable in the future and benefit local residents, it is necessary to use or establish a government-level institution that can collect and produce objective data. In addition, it is necessary to find ways to specify and standardize the standards for setting the living area and specify them in the guidelines.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.269-276
• /
• 1999

The program ESRAS Ver 0.5 that can assess the risk of slopes by means of fuzzy inference is developed in this paper. The results of assessment involve the degree of stability of slopes, the possible travel distance of the soil mass being failed, and anticipated loss of life and properties. With this program, vulnerable slopes can be managed most effectively and the fuzzy inference is used to express quantitatively the judgement of an expert and the uncertainty of slope stability. The fuzzy rule base is composed of an evaluation list for slope stability together with the experience of an expert. This program has been examined for 88 slopes which have been failed or shown a possibility of failure. With this examination, the standards to assess the stability of slopes can be presented and it is proven that this is particularly useful in determining the priority of investment for remedial works of slopes.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.39-46
• /
• 1976

This study was undertaken to establish the cephalometric standards, using lateral cephalometric roentgenograms of 48 male and 53 female Korean adults with normal occlusion and acceptable profile. By Cohen's method, measurement of depth was taken parallel to the FH plane and expressed as a percentage of the cranial base depth (BA-N). And vertical height was measured along the line perpendicular to the FH plane and expressed as a percentage of the anterior face height (N-M). The following conclusions were obtained: 1) Means and standard deviations of craniofacial proportions of Korean adults were tabulated. 2) Cranial babe depth of male was greater than that of female. 3) The proportionate depth of the middle face was greater in female than in male. 4) The proportionate total anterior face height was greater in male than in female. And it was greater in Korean than in the white.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.79-82
• /
• 1976

This study was undertaken to investigate the values of the cephalometric standards of Korean children which consisted of 57 boys and 61 girls with normal occlusion and harmony of the facial musculature. The following conclusions were obtained. 1) The relatively vertical inclination of nasal bone and flat contour of the frontal bone contribute to the flattening of the upper face. 2) Slight lack of chin prominence characterizes the lower face while procumbent incisors and their alveolar bone dominate the middle face. 3) A caudal skull base inclination is probably the most specific feature for Korean.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1416-1419
• /
• 2005

Design and manufacturing of plastic injection mold with cavity pressure/temperature sensors were performed in the present study for tensile test specimen. Standards of mold-base and tensile test specimen were used to design an injection molding system. Cavity pressure and temperature sensors were placed on the side of fixed platen of injection mold machine to prevent them from external impact damage. Injection molding experiments with variations of injection speed and melt temperature were performed and polycarbonate tensile specimens were prepared for the tensile test. It was shown that injection molding processing parameters can have effect on the mechanical properties of the plastic injection molded part.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.143-152
• /
• 2017

The primary purpose of this thesis is to define and discuss the integration of fixed-base operators(FBO) and general aviation terminals(GAT) in Korean aviation practices in order to develop effective management and operational processes needed for Korea's expanding role in the northeast Asian region. The foundation of this research rests on four interconnected strategic points: the Korean government establishing regulations that define general and business aviation, increasing awareness of FBO and GAT, developing standards for effective operations, and optimizing the budget to build necessary infrastructure. There must be an initiative in establishing a guideline of future demand in order for these aforementioned points to take hold and for aviation activities to flourish. Korea will play a more integral role in an emerging market of general and business aviation by adhering to these strategic efforts.