• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.22-22
• /
• 1998

155mm 탄에 항력감소장치를 부착하여 탄의 비행중에 형성되는 탄저부의 항력(Base drag)을 감소시켜 사거리를 연장한 무기체계가 미국 등을 비롯한 많은 국가에서 실용화되고 있다. 국과연은 이미 155mm 신형 자주포탄에 적용되는 항력감소장치(항력감소제 그레인, Base & Closure, 점화장치)는 개발하여 사거리를 연장(약 35%)한 것으로 보고하고 있다. 본 연구는 추후 실용화가 예상되는 155mm 성능개량형 DPICM탄(미제 M864급)에 적용할 수 있는 항격감소제용 저연소속도 혼합형 추진제 개발을 목표로 하여, 이에 동등한 추진제 특성(기계적성질, 연소특성, 접착력, 발열량 등)을 가지는 추진제, 라이너(Inhibitor)의 조성개발을 실시하였다. 그리고 개발된 혼합형 추진제 조성의 성능(사거리 및 분산도)을 확인하기 위하여 항력감소제용 그레인을 제작, 155mm 성능개량형 DPICM탄에 적용하여 발사시험을 실시하였다.

• Neonatal Medicine
• /
• v.17 no.2
• /
• pp.155-160
• /
• 2010

Metabolic acidosis is commonly encountered issues in the management of critically ill neonates and especially of preterm infants during early neonatal days. In extremely premature infants, low glomerular filtration rate and immaturity of renal tubules to produce new bicarbonate causes renal bicarbonate loss. Higher intake of amino acids, relatively greater contribution of protein to the energy metabolism and mineralization process in growing bones are also responsible for higher acid load in premature infant than in adult. Despite widespread use of sodium bicarbonate in the management of severe metabolic acidosis, use of sodium bicarbonate in premature infants should be restricted to a reasonable but unproven exception such as ongoing renal loss. Despite concern about the low pH value (<7.2) which can compromise cellular metabolic function, no treatment guideline has been established regarding the management of metabolic acidosis in premature infants. Appropriately powered randomized controlled trials of base therapy to treat metabolic acidosis in critically ill newborn infants are demanding.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.123-130
• /
• 1989

In order to investigate the biocompatibility of base metal alloys in dental prosthesis, the 3 types of Ni-Cr alloys and the 3 types of Co-Cr alloys were collected and each alloy was extracted in the culture medium. L-cells derived from the subcutaneous tissue of mouse and extracted medium were cultivated. The relative growth rate of L-cells in the tissue culture was calculated with N-R assay. The obtained results were as follows: 1. In the case of the Co-Cr alloys tested, its cytotoxicity proved weak. 2. In the case of the Ni-Cr alloys tested, there was no significant degree of cytotoxicity, especially 25% Victory was proved noncytotoxicity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.2
• /
• pp.9-19
• /
• 2003

Nitrogen oxide gases which were produced by spontaneous reaction of nitrocellulose(NC) in the single base propellant accelerate the decomposition of propellant, and result in the reduction of shelf life. The amount of nitrogen oxide was reduced by the addition of 0.3wt% $CaCO_3$ to conventional stabilizer(DPA) and down of the solvent leaching temperature from $64^{\circ}C$ to $56^{\circ}C$, which extended the shelf life of the single base propellant as much as twice compare with commercial propellant. The perforation diameter increase of propellant from 0.64mm to 0.77mm could compensate for the drop of burning rate which was caused the addition of $CaCO_3$.

• YAKHAK HOEJI
• /
• v.35 no.3
• /
• pp.197-202
• /
• 1991

In order to study drug release from the suppository, three types of hollow suppositories and one conventional suppository were prepared using indomethacin(IDM) as a model drug and Witepsol H-15 as a base. The 4 types of suppository prepared are as follows: type I, conventional suppository containing 50 mg of IDM powder, type II, hollow supository containing 50 mg of IDM powder in the cavity, type III, hollow suppository containing 25 mg of IDM powder in the base and IDM microcapsules (25 mg as IDM powder) in the cavity, and type IV, hollow suppository containing IDM microcapsules (25 mg as IDM powder) in the base and 0.5 ml of 5%(w/v) IDM-PEG 300 solution in the cavity. The drug amount released(%) from type II and I within 24 hrs was 46.7% and 66.9%, respectively. Comparing with the drug amount released from four types of suppository within initial 2 hrs and 24 hrs, that of type IV was high as 32.7% and 76.6%, respectively. IDM-ethycellulose microcapsules passed through 270 mesh sieve and the IDM content was 20.95%.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.1
• /
• pp.1-9
• /
• 1996

A key issue in spoken language processing has become the integration of speech understanding and natural language processing(NLP). This paper presents a parallel computational model for the integration of speech and NLP. The model adopts a hierarchically-structured knowledge base and memory-based parsing techniques. Processing is carried out by passing multiple markers in parallel through the knowledge base. Speech-specific problems such as insertion, deletion, and substitution have been analyzed and their parallel solutions are provided. The complete system has been implemented on the Semantic Network Array Processor(SNAP) and is operational. Results show an 80% sentence recognition rate for the Air Traffic Control domain. Moreover, a 15-fold speed-up can be obtained over an identical sequential implementation with an increasing speed advantage as the size of the knowledge base grows.

• Safety and Health at Work
• /
• v.7 no.3
• /
• pp.213-217
• /
• 2016

Background: The objective of this study is to identify high-risk groups for industrial accidents by setting up 2003 as the base year and conducting an in-depth analysis of the trends of major industrial accident indexes the index of industrial accident rate, the index of occupational injury rate, the index of occupational illness and disease rate per 10,000 people, and the index of occupational injury fatality rate per 10,000 people for the past 10 years. Methods: This study selected industrial accident victims, who died or received more than 4 days of medical care benefits, due to occupational accidents and diseases occurring at workplaces, subject to the Industrial Accident Compensation Insurance Act, as the study population. Results: According to the trends of four major indexes by workplace characteristics, the whole industry has shown a decreasing tendency in all four major indexes since the base year (2003); as of 2012, the index of industrial accident rate was 67, while the index of occupational injury fatality rate per 10,000 people was 59. Conclusion: The manufacturing industry, age over 50 years and workplaces with more than 50 employees showed a high severity level of occupational accidents. Male workers showed a higher severity level of occupational accidents than female workers. The employment period of < 3 years and newly hired workers with a relatively shorter working period are likely to have more occupational accidents than others. Overall, an industrial accident prevention policy must be established by concentrating all available resources and capacities of these high-risk groups.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.45-50
• /
• 2010

The fatigue crack growth characteristics of base metal and weld joint of 9% Ni steel for LNG storage tank was carried out using CT specimen at room temperature and $-162^{\circ}C$. Fatigue crack growth rate of base and weld metals at RT and $-162^{\circ}C$ was coincided with a single line independent of the change of stress ratio and temperature. In the region of lower stress intensity factor range, fatigue crack growth rate at $-162^{\circ}C$ was slower than that at RT, and the slop of fatigue crack growth rate at $-162^{\circ}C$ increased sharply with propagating of fatigue crack, fatigue crack growth rate at RT and $-162^{\circ}C$ was intersected near the region of $2{\times}10-4\;mm$/cycle, and after the intersection region, fatigue crack growth rate at $-162^{\circ}C$ was faster than that at RT. The micro-fracture mechanism using SEM shows the ductile striation in the stable crack growth region. Also the defects of weld specimen after fatigue testing were detected using the A scan of ultrasonic apparatus.

• Journal of Welding and Joining
• /
• v.34 no.2
• /
• pp.46-53
• /
• 2016

Effect of heating rate on microstructure of brazed joints with STS 304 Printed Circuit Heat Exchanger (PCHE),which was manufactured as large-scale($1170(L){\times}520(W)){\times}100(T)$, mm), have been studied to compare bonding phenomenon. The specimens using MBF 20 was bonded at $1080^{\circ}C$ for 1hr with $0.38^{\circ}C/min$ and $20^{\circ}C/min$ heating rate, respectively. In case of a heating rate of $20^{\circ}C/min$, overflow of filler metal was observed at the edge of a brazed joints showing the height of filler metal was decreased from $100{\mu}m$ to $68{\mu}m$. At the center of the joints, CrB and high Ni contents of ${\gamma}$-Ni was existed. For the joints brazed at a heating rate of $0.38^{\circ}C/min$, the height of filler was decreased from $100{\mu}m$ to $86{\mu}m$ showing the overflow of filler was not appeared. At the center of the joints, only ${\gamma}$-Ni was detected gradating the Ni contents from center. This phenomenon was driven from a diffusion amount of Boron in filler metal. With a fast heating rate $20^{\circ}C/min$, diffusion amount of B was so small that liquid state of filler metal and base metal were reacted. But, for a slow heating rate $0.38^{\circ}C/min$, solid state of filler metal due to low diffusion amount of B reacted with base metal as a solid diffusion bonding.

• Korean Journal of Microbiology
• /
• v.40 no.3
• /
• pp.237-243
• /
• 2004

The aim of this study is to investigate the detection rate of putative periodontopathogens, Porphyromonas gingivalis, Tannerella forsythia, and Actiobacillus actinomycetemcomitans, related to cardiovascular diseases(CVD). Plaques were sampled from 15 subjects (4 sites of denture base and/or tooth) with sterilized explorers and were transported in IX PBS. The detection of periodontopathogens was performed by polymerase chain reaction with species-specific primers based on 16S rDNA. The PCR products were cloned into pGEM-T easy vector and its nucleotides were sequenced in order to confirm the specificity. Our data showed that the detection rate of P. gingivalis and T forsythia in denture base of edentulous patients was 25％ and 75％, respectively. And the detection rate of P. gingivalis and T.forsythia in denture base of patient having one more tooth was 91％. The results indicate that plaque of denture base may serve as reservoirs of oral bacteria related to CVD.