• 한국태양에너지학회 논문집
• /
• 제32권spc3호
• /
• pp.213-219
• /
• 2012

Nanofluids are advanced concept fluid that solid particles of nanometer size are stably dispersed in fluid likes water, ethylene glycol and others. They have higher thermal conductivities than base fluids. If using this characteristic, efficiencies of heat exchangers can be increased. Therefore in this study, we measured thermal conductivity and viscosity of carbon nanofluids. They were made to ultra sonic dispersed oxidized multi-walled carbon nanotubes(OMWCNTs) in distilled water and ethanol, respectively. The mixture ratios of OMWCNTs were from 0.0005 vol% ~ 0.1 vol%. Thermal conductivity and viscosity was measured by transient hot-wire method and rotational viscometer. The results of an experiment are as in the following: thermal conductivity of the 0.1 vol% pure-water nanofluid improved 7.98% ($10^{\circ}C$), 8.34% ($25^{\circ}C$), and 9.14% ($70^{\circ}C$), and its viscosity increased by 37.08% ($10^{\circ}C$), 33.96% ($25^{\circ}C$) and 21.64% ($70^{\circ}C$) than the base fluids. Thermal conductivity of the 0.1 vol% ethanol nanofluids improved 33.72% ($10^{\circ}C$), 33.14% ($25^{\circ}C$), and 32.25% ($70^{\circ}C$), and its viscosity increased by 35.12% ($10^{\circ}C$), 32.01% ($25^{\circ}C$) and 19.12% ($70^{\circ}C$) than the base fluids.

• 대한치과기공학회지
• /
• 제9권1호
• /
• pp.51-55
• /
• 1987

One of the primary advantages of acrylic resin teeth is their ability to bond chemically to the denture base resins. Fracture od acrylic resin teeth from a maxillary denture, however, is not uncommon. Bonding failures have been attributed to faulty boil-out procedures that fail to eliminate all traces of wax from the ridge lap surfaces of the teeth and to contamination of the ridge lap surface by careless application of tinfoil substitute. Attempts to increase the strength of the bond between acrylic resin teeth and heat-cured denture base resin include grinding the glossy ridge lap surface (in fluid system), painting the ridgelap surface of the teeth with monomer-polymer solution, and cutting retention grooves in the ridge lap surface of the teeth. This latter method has been tested by applying a tensile force in a labial direction to the incisal part of the lingual surface of the acrylic resin teeth. A progressive shear compressive load was applied at an angle to the lingual surface of acrylic resin teeth bonded to denture base acrylic resin. No statistically singificant advantage was derived by preparing retention grooves of different shapes in the ridgelap surface of the denture teeth.

• 한국임상수의학회지
• /
• 제28권4호
• /
• pp.352-356
• /
• 2011

Abstract: This study was aimed to diagnose acid-base disorders of dogs with canine parvoviral enteritis (CPE) and data to establish a rational fluid therapy regimen for patients with CPE. A total of 43 dogs which had clinical signs of CPE and had detected canine parvovirus by polymerase chain reaction, were bled anaerobically from jugular vein at the time of admission. Blood chemical test, determination of electrolytes and blood gas analysis were conducted, and calculated values were obtained from each measured items. The values of blood chemical and electrolytes of dogs with CPE were various depending on the degree of clinical signs, and these tests were not specific to diagnose for CPE. Hypochloremia (20.9%), hyperchloremia (11.6%), hypokalemia (7.0%), hyperkalemia (11.6%), hyponatremia (9.3%) and hypernatremia (18.6%) were diagnosed as abnormalities of electrolytes from 43 dogs with CPE. The 29 out of 43 dogs (67.4%) were metabolic acidosis and 3 dogs (7.0%) were metabolic alkalosis. The acid-base status of 11 dogs out of 43 dogs (25.6%) was normal.

• Coupled systems mechanics
• /
• 제1권4호
• /
• pp.311-324
• /
• 2012

Previous investigations have demonstrated that strong earthquakes can cause severe damage or collapse to storage tanks. Theoretical studies by other researchers have shown that allowing the tank to uplift generally reduces the base shear and the base moment. This paper provides the necessary experimental confirmation of some of the numerical finding by other researchers. This paper reports on a series of experiments of a model tank containing water using a shake table. A comparison of the seismic behaviour of a fixed base system (tank with anchorage) and a system free to uplift (tank without anchorage) is considered. The six ground motions are scaled to the design spectrum provided by New Zealand Standard 1170.5 (2004) and a range of aspect ratios (height/radius) is considered. Measurements were made of the impulsive acceleration, the horizontal displacement of the top of the tank and uplift of the base plate. A preliminary comparison between the experimental results and the recommendations provided by the liquid storage tank design recommendations of the New Zealand Society for Earthquake Engineering is included. The measurement of anchorage forces required to avoid uplift under varying conditions will be discussed.

• 한국추진공학회지
• /
• 제16권1호
• /
• pp.45-54
• /
• 2012

위 측면 표면 기울기가 변화하는 비대칭 사다리꼴 핀의 최적화가 2차원 해석적 방법을 사용하여 수행된다. 고정된 핀 바닥 높이에 대하여 최적 열손실, 핀 길이 그리고 유용도가 내부유체 대류특성계수, 핀 바닥 두께, 핀 바닥 높이, 핀 형상계수 그리고 주위 대류특성계수의 함수로 나타내어진다. 이러한 최적화 절차를 위해서 핀으로부터의 최대 열손실 값의 95%를 최적 열손실 값으로 정의하였다. 결과 중 하나는 최적 열 손실과 유용도는 핀 형상계수의 변화에 독립적으로 보이는 반면 최적 핀 길이는 핀 형상계수가 증가함에 따라 거의 선형적으로 감소함을 보여주고 있다.

• 한국추진공학회지
• /
• 제11권5호
• /
• pp.14-22
• /
• 2007

측면 표면 기울기가 변화하는 역 사다리꼴 핀이 2차원 해석적 방법을 사용하여 최적화된다. 핀 바닥 경계조건을 위해서, 내부유체로부터 내벽까지의 대류와 내벽부터 핀 바닥까지의 전도가 고려된다. 핀 끝 면으로부터의 열손실은 무시되지 않는다. 실제적인 핀 길이에서의 최대 열손실, 그 최대 열손실이 발생할 때의 최적의 효율, 핀 길이 그리고 핀 바닥 높이가 핀 내 외부의 대류특성계수의 함수로 나타내어진다. 결과 중 하나는 핀 바닥 높이에 대한 핀 끝 높이의 비가 커질수록 최적의 핀 형상은 두껍고 짧아지는 형상이 됨을 보여준다.

• Advances in aircraft and spacecraft science
• /
• 제7권3호
• /
• pp.203-214
• /
• 2020

In many applications like the aircraft or the rockets/missiles, the flow from a nozzle needs to be expanded suddenly in an enlarged duct of larger diameter. The enlarged duct is provided after the nozzle to maximize the thrust created by the flow from the nozzle. When the fluid is suddenly expanded in an enlarged duct, the base pressure is generally lower than the atmospheric pressure, which results in base drag. The objective of this research work is to optimize the length to diameter (L/D) ratio of the enlarged duct using the CFD analysis in the flow field from the supersonic nozzle. The flow from the nozzle drained in an enlarged duct, the thrust, and the base pressure are studied. The Mach numbers for the study were 1.5, 2.0 and 2.5. The nozzle pressure ratios (NPR) of the study were 2, 5 and 8. The L/D ratios of the study were 0.5, 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10. Based on the results, it is concluded that the L/D ratio should be increased to an optimum value to reattach the flow to an enlarged duct and to increase the thrust. The supersonic suddenly expanded flow field is wave dominant, and the results cannot be generalized. The optimized L/D ratios for various combinations of flow and geometrical parameters are given in the conclusion section.

• Archives of Plastic Surgery
• /
• 제50권1호
• /
• pp.54-58
• /
• 2023

Patients with Crouzon syndrome have increased risks of cerebrospinal fluid rhinorrhea and meningoencephalocele after LeFort III osteotomy. We report a rare case of meningoencephalocele following LeFort III midface advancement in a patient with Crouzon syndrome. Over 10 years since it was incidentally found during transnasal endoscopic orbital decompression, the untreated meningoencephalocele eventually led to intermittent clear nasal discharge, frontal headache, and seizure. Computed tomography and magnetic resonance imaging demonstrated meningoencephalocele in the left frontal-ethmoid-maxillary sinus through a focal defect of the anterior cranial base. Through bifrontal craniotomy, the meningoencephalocele was removed and the anterior cranial base was reconstructed with a pericranial flap and split calvarial bone graft. Secondary frontal advancement was concurrently performed to relieve suspicious increased intracranial pressure, limit visual deterioration, and improve the forehead shape. Surgeons should be aware that patients with Crouzon syndrome have the potential for an unrecognized dural injury during LeFort III osteotomy due to anatomical differences such as inferior displacement and thinning of the anterior cranial base.

• 자원환경지질
• /
• 제34권6호
• /
• pp.507-522
• /
• 2001

통영광산은 첨열수광상으로서 능망간석 , 백운모, 일라이트, 황철석 , 방연석 , 황동석 , 섬아연석 , 아칸다이트 및 헤사이트등의 광물을 수반하는 초기의 광석광물 침전시기와 후기의 맥석광물 침전시기로 구분된다. 초기는 반복적인 대상구조를 띠고, 황화광물이 침전된 시기로서 텔루리움 광물과 함께 엘렉트럼이 산출된다. 후기에는 주로 단산염 광물과 천금속광물이 침전되었다. 통영 열수계에서 광화단계에 따른 상이한 열수유체의 변천과정을 구체적으로 규명하기 위하여 프로그램 CHILLER를 이용한 수치모델링이 실시되었다. 반응경로 모델링은 28$0^{\circ}C$에서 모암인 안산암과의 반응을 비롯하여, 27$0^{\circ}C$에서 12$0^{\circ}C$까지의 단순한 등압 냉각, 비등과 지하수의 혼입에 따른 희석 및 압력파 온도가 감소되는 조건에서 수행하였다. 모델링 결과 초기 광화유체는 산성용액(pH=5.7)으로 상대적으로 높은 염농도와 금속원소 함량이 높다. 장화유체 내의 금의 함량은 열수계의 천금속원소 총량과 황화물의 활동도에 의해 지배된다. 통영 천열수계에서의 광화작용은 천부에서 일어난 참화유체의 비등과 이에 수반된 가열된 지하수의 흔입에 의한 반응경로를 반영하며, 현미경에서 관찰된 광물공생 특성과 모델링에 의한 침전광물의 조합 및 엘렉트럼의 화학조성 등에서 동일한 경향을 나타낸다. 이러한 유사성은 Te 함유하는 천열수 금 . 은광상이 열수계에서의 비등과 유체혼합(희석)에 의해 생성되었음을 지시한다. 반응경로 모델링 연구는 광상성인을 이해하는 중요한 수단이며, 유사한 지질환경에서의 광강탐사에 유용한 자료로 활용될 것으로 생각된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.84.1-84.1
• /
• 2015

Recent years in particular in Korea see intensive interests in a deep geothermal engineering and its application in different uses as far as from direct uses to power generation sectors, that are achieved by harnessing hot energy sources from the earth. For instance widespread interest has been generated because the geothermal energy is the source that one extracts it for more than 20 hours per day and for about 30 years of an operation of the plant, which enables to give base load as for heating as well as an electric generation. In retrospect, shallow geothermal energy using heat pumps is commonplace in Korea while the deep geothermal is in the early stage of the development. Geothermal energies in view of the way of extracting heat are mainly categorized into several types such as a single well system, a hydrothermal system, an enhanced geothermal system (EGS) etc. In this talk, this speaker focuses on the thermo-fluid engineering of the single well system by introducing the modeling in order to harness hot fluid that is thermally balanced with the fluid of an injection well, which provides a challenge to assess the life time of the well. To avoid the loss of the temperature in producing the hot fluid, a specialized pipe or a borehole heat exchanger has been designed, and its concept is introduced. On the other hand, a binary system or an organic Rankine cycle, which provides the methodology to convert the heat into an electricity, is briefly introduced. Some experimental results of the binary system which has been constructed in our lab will be presented. Lastly as for the future direction, some comments for the industrialization of the deep geothermal energy in this country will be discussed.