• Journal of the Korean Chemical Society
• /
• v.51 no.1
• /
• pp.31-35
• /
• 2007

The tripodal copper(II) complex [Cu(pmea)(H2O)](ClO4)2·H2O (1) (pmea = bis[(2-pyridyl)methyl]-2-(2-pyridyl)ethylamine) has been synthesized and structurally characterized by X-ray diffraction method. It crystallizes in the triclinic system P-1 with a = 9.9362(9), b = 15.7299(17), c = 18.0562(11) A, α = 68.760(8), β = 76.331(6), γ = 77.092(9)°, V = 2526.2(4) A3, Z = 2. Each copper atom reveals a distorted square pyramidal with three nitrogen atoms of the pmea ligand and water molecule occupying the basal plane and one nitrogen atom from the pyridine ring according the axial position. The cyclic voltammogram of 1 undergoes reversible one-electron oxidation to the CuIII and reversible one-electron reduction to the CuI.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.63-71
• /
• 2004

Recently, a sheet forming process of Mg alloys is highlighted again due to increasing demand for Mg wrought alloys in the applications of casings of mobile electronics and outer-skins of light-weight transportation. Microstructure control is essential for the enhancement of workability and formability of Mg alloy sheets. In this research, AZ31 Mg alloy sheets were prepared by hot rolling process and the rolling condition dependency of the microstructure and texture evolution was studied by employing a conventional rolling mill as well as an asymmetric rolling mill. When rolled through multiple passes with a small reduction per pass, fine-grained and homogeneous microstructure evolved by repetitive dynamic and static recrystallization. With higher rolling temperature, dynamic recrystallization was initiated in lower reduction. However with increasing reduction per pass, deformation was locallized in band-like regions, which provided favorable nucleation sites f3r dynamic recrystallization. Through post annealing process, the microstructures could be transformed to more equiaxed and homogeneous grain structures. Textures of the rolled sheets were characterized by $\{0002\}$ basal plane textures and retained even after post annealing. On the other hand, asymmetrically rolled and subsequently annealed sheets exhibited unique annealing texture, where $\{0002\}$ orientation was rotated to some extent to the rolling direction and its intensity was reduced.

• Journal of Adhesion and Interface
• /
• v.20 no.4
• /
• pp.155-161
• /
• 2019

Understanding charge transport anisotropy at the interface of conjugated nanostructures basically gives insight into structure-property relationship in organic field-effect transistors (OFET). Here, the anisotropy of the field-effect mobility at the interface between 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene) single crystal with cofacial molecular stacks in a-b basal plane and SiO gate dielectric was investigated. A solvent exchange method has been used in order for TIPS-pentacene single crystals to be grown on the surface of SiO₂ thin film, corresponding to the charge accumulation at the interface in OFET structure. In TIPS-pentacene OFET, the anisotropy ratio between the highest and lowest measured mobility is revealed to be 5.2. By analyzing the interaction of a conjugated unit in TIPS-pentacene with the nearest neighbor units, the mobility anisotropy can be rationalized by differences in HOMO-level coupling and hopping routes of charge carriers. The theoretical estimation of anisotropy based on HOMO-level coupling is also consistent with the experimental result.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.153-163
• /
• 2004

The purpose of this study was to evaluate the postretention change of class II malocclusion treatment and to examine which factors were related to the relapse. Seventy-eight treated cases were divided into two groups according to the stability of treatment results. Various measurements in pre-treatment and post-treatment lateral cephalograms were evaluated and comparisons were drawn between the stable and relapse group by t-test and correlation analysis. 1. There were only a row differences in the skeletodental relationship in the pre-treatment phase between the stable and the relapse group. 2. Mandibles in the stable group were repositioned mote anteriorly than those in the relapse group. 3. Mandibular incisors were more uprighted to the basal bone and maxillary incisors were less lingualized in the stable group than in the relapse group. 4. Occlusal plane was inclined forward and downward in the relapse group.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.1
• /
• pp.5-12
• /
• 2000

As a semiconductor material for electronic devices operated under extreme environmental conditions, silicon carbides (SiCs) have been intensively studied because of their excellent electrical, thermal and other physical properties. The growth characteristics of single- crystalline 6H-SiC homoepitaxial layers grown by a thermal chemical vapor deposition (CVD) were investigated. Especially, the successful growth condition of 6H-SiC homoepitaxial layers using a SiC-uncoated graphite susceptor that utilized Mo-plates was obtained. The CVD growth was performed in an RF-induction heated atmospheric pressure chamber and carried out using off-oriented ($3.5^{\circ}$tilt) substrates from the (0001) basal plane in the <110> direction with the Si-face side of the wafer. In order to investigate the crystallinity of grown epilayers, Nomarski optical microscopy, transmittance spectra, Raman spectroscopy, XRD, Photoluninescence (PL) and transmission electron microscopy (TEM) were utilized. The best quality of 6H-SiC homoepitaxial layers was observed in conditions of growth temperature $1500^{\circ}C$ and C/Si flow ratio 2.0 of $C_3H_8$ 0.2 sccm & $SiH_4$ 0.3 sccm.

• Transactions of Materials Processing
• /
• v.17 no.6
• /
• pp.412-419
• /
• 2008

Using lightweight materials in vehicle manufacturing in order to reduce energy consumption is one of the most effective approach to decrease pollutant emissions. As a lightweight material, magnesium is increasingly employed in automotive parts. However, because of its hexagonal closed-packed(HCP) crystal structure, in which only the basal plane can move, the magnesium alloy sheets show low ductility and formability at room temperature. Thus the press forming of magnesium alloy sheets has been performed at elevated temperature within range of $200^{\circ}C{\sim}250^{\circ}C$. Here we try the possibility of sheet metal forming at room temperature by adopting incremental forming technique with rotating tool, which is so called as rotational-incremental sheet forming(RISF). In this rotational-incremental sheet forming the spindle tool rotates on the surface of the sheet metal and moves incrementally with small pitch to fit the sheet metal on the desired shape. There are various variables defining the formability of sheet metals in the incremental forming such as speed of spindle, pitch size, lubricants, etc. In this study, we clarified the effects of spindle speed and pitch size upon formability of magnesium alloy sheets at room temperature. In case of 0.2, 0.3 and 0.4mm of pitch size with hemispherical rotating tool of 6.0mm radius, the maximum temperature at contact area between rotating tool and sheet metal were $119.2^{\circ}C,\;130.8^{\circ}C,\;and\;177.3^{\circ}C$. Also in case of 300, 500, and 700rpm of spindle speed, the maximum temperature at the contact area were $109.7^{\circ}C,\;130.8^{\circ}C\;and\;189.8^{\circ}C$.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.3
• /
• pp.122-129
• /
• 2021

This study focuses on the microstructural development of 99% magnesium alloy sheet manufactured using twin roll casting (TRC) process. Herein, a plate with a thickness of 5 mm was manufactured using the TRC process, homogenization heat treatment was performed at 400℃ for 2-32 h, and finally, the change in microstructure was evaluated via optical microscopy and textural analysis. The results suggest that the plate manufactured using the TRC process was not destroyed and was successfully rolled into a plate. Microscopic observation suggested that the dendritic cast structure was arranged along the rolling direction. And the central layer of the rolled plate, where was present in a liquid state at the beginning of rolling, solidified later during the TRC process to form central segregation. The initial cast structure and inhomogeneous structure of the plate were recrystallized by homogenization heat treatment for only 2 h, and it was confirmed that the segregated part of the central layer became homogeneous and recrystallization occurred. Grain growth occurred as the heat treatment time increased, and secondary recrystallization occurred, wherein only some grains were grown. The textural analysis, which was conducted via X-ray diffraction, confirmed that the relatively weak basal plane texture developed using the TRC process was formed into a random texture after heat treatment.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.5
• /
• pp.267-271
• /
• 1995

To improve regeneration efficiency of Brassica campestris ssp. pekinensis (chinese cabbage) in vitro, the effect of ehtylene inhibitors [AgNO$_3$ and silver thiosulfate (STS)] and optimal age of explantse were investigated. On the effect of ethylene inhibitors either 100 $\mu$M of AgNO$_3$ or 5 $\mu$M of STS enhanced shoot regeneration from cotyledons when it was added in basal shoot induction media(MS salts, B5 vitamine, sucrose 2%, BA 2.0mg/L, NAA 1.0mg/L). But at higher concentrations, AgNO$_3$ induced abnormal shoots, and STS greatly reduced regeneration frequency. On the other hand, the maximum regeneration rate was obtained from the cotyledons taken from 3-day old seedlings. However there was no distinctive effect among the containers used for cultivation. The most optimal condition of root induction was a minimal Murashige and Skoog media containing 0.1 mg/L NAA. In order to induce bolting and flowering from in vitro regenerated chinese cabbage, the plant were healed at 4$^{\circ}C$ for weeks in a cold chamber. When they were planted in pots, the plane produced phenotipically normal flowers and seeds. The overall results suggest that ethylene inhibitors promote regeneration of shoot from cotyledons of chinese cabbage without alleviating fertility.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.5
• /
• pp.299-306
• /
• 1995

The objective of this study is to establish an efficient celll culture system for somatic embryogenesis in Ostericum koreanum and Angelica purpuraefolia. The highest frequency of embryogenic callus on immature seeds of O. konanum and A, purpuraefolia. was obtained when seeds were cultured on MS medium containing 0.1 mg/L 2,4-D and 0.1 mg/L BA. However somatic embryos were formed directly from the edge of cotyledon and hypocotyl of plant which regenerated on medium supplemented with 0.1-3.0 mg/L NAA. Immature seed explane cultured at 25$\pm$2$^{\circ}C$ after 10 days treatment at 5$^{\circ}C$ produced embryogenic callus and somatic embryos, and these differentiated into whole plane. Addition of glutamine and coconut milk to media did not enhance the frequency of somatic embryogenesis in immature seed cultures of A. purpuraefolia. However in immature seed culture of O. koreanum, the frequency of somatic embryogenesis were increased on media supplemented with glutamine and 10% coconut milk. Especially addition of glutamine to the medium substituted effect of NH$_4$N0$_3$ in constast to coconut milk. The highest frequency of conversion somatic embryos into plantlet was 89.1% on MS basal medium Embryogenic calli were grown vigorously when maintained on medium with 0.01 mg/L 2,4-D and 0.01 mg/L BA.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.69-77
• /
• 2002

Margarite, which occurs in the Unkyori Formation of Miwon area, Chungcheongbukdo, South Korea, was investigated using the petrographic microscope, back-scattered electron images (BSEI), and electron probe microanalyzer (EPMA) to characterize the alteration textures and mineral chemistries. Most margarite crystals are inhomogeneous, and chlorite was commonly observed to occur at the boundaries parallel to the rim of margarite. Cracks occur across the basal plane of the margarite, and margarite is partly replaced by chlorite along the cracks. In additon, muscovite and biotite are intergrown in margarite and chlorite crystals, suggesting that margarite was partially altered to chlorite as well as to muscovite and biotite. Chemical analysis data show that paragonite solid solution in the margarite is approximately 19.6 mol%, but clintonite solid solution is negligible. Margarite crystals in the Unkyori Formation cut or penetrate other metamorphic minerals In the same thin sections and are oriented randomly without any relationship with the foliation of host rocks, indicating that formed as a secondary mineral after peak metamorphism. Furthermore, it seems that hydrothermal fluids associated with the Mesozoic intrusions developed near the sample are closely related to the margarite formation.