• 전기의세계
• /
• v.19 no.2
• /
• pp.12-17
• /
• 1970

In the design of electrical equipment insulation, it is customary to place pressboard and other insulating material at right angle to the electrical discharge path, which is based on the insulation tests performed on equipment under various conditions such as types of insulation, applied voltage and other unique situations. Since electrical equipment manufacturing started only recently, there is a scarcity of available data on insulation problems, which make it difficult for the design engineers. The author untook this study to provide such analytical design data for various conditions based on the experiment conducted on the equipment being manufactured, thus reducing possible errors in the process.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.6 no.11
• /
• pp.7-16
• /
• 2000

This study shows the 'design guide-line' for the handicapped people who uses certain buildings or facilities, for Barrier Free. It has the object that they are able to utilize the facilities in the variable buildings basically and to approach to informations without difficulties. So, it can be used as 'design guide-line' for the handicapped people through several architectural criterions.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.361-368
• /
• 1998

This paper sums up the study of the soundproof facilities to be placed on the test track section within the Seoul-Pusan H.S.T project. The objective of this study is to determine optimum design of soundproof including height, length, location, sound absorbing materials for test track(chonan-taejon). This paper shows the model to design the shape and materials of noise barrier for high speed trains(TGV, ICE, etc). Noise prediction is to be conducted by MITHRA. Various parameters affecting the noise propagation outdoors are surveyed and discussed in relation to H.S.T. noise.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.305-324
• /
• 2000

This study compared the short-term(4 months) clinical results of regenerative therapy with bioabsorbable membranes($BioMesh^{(R)}$) and bone allograft for the treatment of periodontal(intrabony and furcation) defects in smokers and nonsmokers.(16 smokers) 32 subjects with 92 defects participated in the study(46 in smokers and 46 in non-smokers). This study also evaluated a bioresorbable barrier with and without decalcified freeze-dried bone allograft(DFDBA). The 92 periodontal defects were randomly treated with either the resorbable barrier alone or resorbable barrier in combination with DFDBA following thorough defect debridement and root preparation with tetracycline. Each patient received both types of treatment modalities. Clinical examinations(probing depth, gingival recession, clinical attachment level, plaque index and gingival index) were carried out immediately before and 4 months after surgery. Significant(p<0.001) gains in mean attachment level were observed for both smokers(2.93mm) and non-smokers(3.30mm) but there were not significant difference between two groups. Similarly, significant reductions in mean probing depthshowed for smokers(4.52mm) and non-smokers(4.26mm). However, when comparing gingival recession, smokers were found to exhibit significantly poorer treatment results(1.59mm vs 0.96mm, p<0.05). Using the split-mouth-design, no statistically significant difference between the two modalities could be detected with regard to pocket depth reduction, gingival recession, or attachment gain. These results illustrate that the attachment gain is better in the non-smoker and the best in the non-smoker with the combination therapy of resorbable barrier and DFDBA than with resorbable barrier alone but smoking had no significant effect on clinical treatment outcome, even though smokers show more significant gingival recession. In addition, both treatments, either resorbable barrier plus DFDBA or resorbable barrier alone, promoted significant resolution of periodontal defects but the addition of DFDBA with a bioabsorbable membrane appears to add no extra benefit to the only membrane treatment.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.3
• /
• pp.45-52
• /
• 2014

Recently, Korean people are more interested in leisure time as the Korean economy has enjoyed the economic growth on a continual basis. Along with it, the disabled people's demand for enjoying the beach is growing. To meet the disabled people's demand for enjoy the beaches, it is important to prepare the convenient facilities where the disabled people in the wheel chair can use comfortably, including the handicapped parking area, toilet for the disabled, shower stall room and am bathhouse. On the backdrop of this, the study has been made on the obstacles which keep the disabled people from using the convenient facilities installed on 12 beaches in the southern coat of Korea from the perspective of barrier free design. This study showed that half of the beaches in question did not have the handicapped parking places. The parking space was also so narrow that it was difficult for handicapped people to access the parking lot with their vehicles. There were also 3 beaches which did not have the toilet for the disabled. Even the beaches which have the toilet for the disabled, the size of entrance door and floor space was so narrow and there were a lot of physical obstacles such as no handles for the disabled people that it was really hard for the disabled people in wheelchair to use them.

• Journal of Environmental Science International
• /
• v.20 no.5
• /
• pp.623-630
• /
• 2011

This study investigated the degradation of N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the generation of OH radical) by using dielectric barrier discharge (DBD) plasma. The DBD plasma reactor of this study consisted of a quartz dielectric tube, titanium discharge (inner) and ground (outer) electrode. The effect of shape (rod, spring and pipe) of ground electrode, diameter (9~30 mm) of ground electrode of spring shape and inside diameter (4~13 mm) of quartz tube, electrode diameter (1~4 mm), electrode materials (SUS, Ti, iron, Cu and W), height difference of discharge and ground electrode (1~15.5 cm) and gas flow rate (1~7 L/min) were evaluated. The experimental results showed that shape of ground electrode and materials of ground and discharge electrode were not influenced the RNO degradation. The thinner the diameter of discharge and ground electrode, the higher RNO degradation rate observed. The effect of height gap of discharge between ground electrode on RNO degradation was not high within the experimented value. Among the experimented parameters, inside diameter of quartz tube and gas flow rate were most important parameters which are influenced the decomposition of RNO. Optimum inside diameter of quartz tube and gas flow rate were 7 mm and 4 L/min, respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.4
• /
• pp.275-281
• /
• 2014

This study has been analyzed the sound performance of the noise barriers with respect to the configuration of the front perforated panel geometries and the filled absorption materials. Noise barriers' acoustic performance should be required to meet 0.7 of NRC value at least. The global absorbing performance of the barriers have been investigated by changing the opening ratio of the front perforated panel and the absorbing characteristics of the absorbing material using two microphone method. Therefore, It it possible to obtain to increase acoustic performance of the specific frequency ranges by designing the perforate rates of the front panel and absorbing characteristics of the absorbing materials inside, as well. This study try to find out the possibilities of applying the absorbing noise barrier to railway usage.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.244-251
• /
• 2016

In this paper, we investigate the electrical characteristics of two trench-gate-type super-barrier rectifiers (TSBRs) under different p-body implantation conditions (low and high). Also, design considerations for the TSBRs are discussed in this paper. The TSBRs' electrical properties depend strongly on their respective p-body implantation conditions. In the case of the TSBR with a low p-body implantation condition, it exhibits MOSFET-like properties, such as a low forward voltage ($V_F$) drop, high reverse leakage current, and a low peak reverse recovery current owing to a majority carrier operation. However, in the case of the TSBR with a high p-body implantation condition, it exhibits pn junction diode.like properties, such as a high $V_F$, low reverse leakage current, and high peak reverse recovery current owing to a minority carrier operation. As a result, the TSBR with a low p-body implantation condition is capable of operating as a MOSFET, and the TSBR with a high p-body implantation condition is capable of operating as either a pn junction diode or a MOSFET, but not both at the same time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.524-533
• /
• 2003

DBD(Dielectric Barrier Discharge) plasma in air is well established for the production of large quantities of ozone and is more recently being applied to aftertreatment processes for HAPs(Hazardous Air Pollutants). Aim of this work is to determine design and operating parameters of a hybrid air cleaning system. DBD and ESP(Electrostatic Precipitator) are used as nano particle charger and collector, respectively. Pelletized MnO$_2$ catalyst or activated carbon is used fer ozone decomposition or adsorption material. AC voltage of 7～10 KV(rms) and 60 Hz is used as DBD plasma source. DC - 8 KV is applied to the ESP for particle collection. The overall particle collection efficiency for the hybrid system is over 85 % under 0.64 m/s face velocity. Ozone decomposition efficiency with pelletized MnO$_2$ catalyst or activated carbon packed bed is over 90 % when the face velocity is under 0.4 m/s in dry air.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.23-30
• /
• 2016

Purpose - This research focuses on the analysis of logistics barriers in Korea, China and Japan facing the barriers of overseas-expanded manufacturers with other countries. With the tree countries are emerging as the biggest trade partners in Northeast Asia, their logistics barriers are applied with similar verification methods of preceding researches such as Carter(1997). Research design, data and methodology - Collecting the statistics data from the three countries' overseas-expanded manufacturers, t-verification was performed in order to analyze average value and verify any significance. Additionally, multiple regression analysis was used to analyze any influence on the relationship in Korean logistics barrier and Chinese and Japanese expansion to Korean market. Results - Statistics suggested that three countries' logistics barriers are significantly differentiated by each verification categories, and Korean barrier negatively affected Chinese and Japanese manufacturers coming into Korean market. Conclusions - As a result of multiple regression analysis of the influencing relationship between Korea's logistics barrier and Chinese and Japanese companies coming into Korean market, all of the Korean barriers are affecting the companies as an obstructive factor, and it is proved to be statistically meaningful. Therefore, in order to reduce Chinese and Japanese companies' cost burden, it is necessary that not only reasonable charge system and taxation support but also comprehensive measure establishment reduce Korea's logistics barriers. However, since this research has a limitation in samples and shows a period of 5 years in the three nations' trade barriers, continuous and complementary researches are necessary in order to develop certain objectivity.