• 한국재료학회지
• /
• 제16권9호
• /
• pp.543-549
• /
• 2006

Polyimides (PI) are treated with $He/O_2$ and $He/O_2/NF_3$ atmospheric pressure rf dielectric barrier discharge in order to investigate the roles of $NF_3$ that is one of the PI etching gases. Surface changes are analyzed by x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurement. The surface roughness of PI and the ratio of C=O, which is hydrophilic functional group, is more increased by $He/O_2/NF_3$ discharge than by $He/O_2$ discharge. The C=O species on the PI surface is increased up to 30 percent with rf power. The surface roughness of PI is increased from 0.4 to 11 nm with rf power. The water drop contact angles on PI, however, are reduced from $65^{\circ}\;to\;9^{\circ}$ by plasma treatment independently of $NF_3$.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.103-115
• /
• 2013

액체로켓 연소기에 사용되는 열차폐코팅(TBC)의 내구성 시험 기술동향을 조사하였다. 표면 접합력 측정을 위한 기계적 시험, 레이저나 가열로, 버너나 플라즈마 등을 이용한 열피로 시험, 분사기를 이용한 소형 연소시험, 열적 기계적 피로시험 등의 많은 내구성 시험들이 있었다. 연소기에 사용하기 위해 이러한 시편 수준의 시험을 통해 내구성이 확보된 TBC를 결정할 수 있으며, 실제 연소시험을 통해 내구성을 검증할 수 있다.

• 항공우주시스템공학회지
• /
• 제11권6호
• /
• pp.56-63
• /
• 2017

유전체 장벽방전에 의해 발생되는 추력을 실린더 형상의 파이프 내부에서 여러 조건에 대해 측정하였다. 입력 전압 및 주파수는 각각 2에서 9 kVpp 및 5에서 15 kHz를 적용하였으며, 높이가 50 mm부터 100 mm 범위의 실린더에 대해 실험을 수행하였다. 측정 결과에 따르면, 발생된 추력의 크기는 전압 및 주파수를 증가시킬 경우 각각 증가하였으나 실린더의 높이가 증가하면 감소하였다. 실린더 높이가 증가할 때 발생된 추력의 감소는 벽면과의 마찰로 인한 유동의 에너지 손실이 원인이지만, $Coand\check{a}$ 효과의 감소 등 그 외의 추가적인 원인이 있다고 추정된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.603-615
• /
• 2012

액체로켓 연소기에 사용되는 열차폐코팅(TBC)의 내구성 시험 기술동향을 조사하였다. 표면 접합력 측정을 위한 기계적 시험, 레이저나 가열로, 버너나 플라즈마 등을 이용한 열피로 시험, 분사기를 이용한 소형 연소시험, 열적 기계적 피로시험 등의 많은 내구성 시험들이 있었다. 연소기에 사용하기 위해 이러한 시편 수준의 시험을 통해 내구성이 확보된 TBC를 결정할 수 있으며, 실제 연소시험을 통해 내구성을 검증할 수 있다.

• 한국환경과학회지
• /
• 제30권7호
• /
• pp.507-517
• /
• 2021

In this study, the bathymetric data acquired from 2018 to 2020 and the precipitation and suspended sediment data were analyzed for changes in bathymetry owing to the discharge from the Nakdong River barrier and environmental factors, especially the torrential rain in 2020. Sediment erosion and deposition processes are repeated because of complex environmental factors such as discharge from the Nakdong River barrier and the influence of waves generated from the external sea. In the first half of the year after the dry season, bathymetric data showed relative erosion trends, whereas in the second half after the flood season, deposition trends were identified owing to the increase in sediment transport. However, the data from the second half of 2020 showed a large amount of erosion, resulting in tendencies different to those of erosion in the first half and deposition in the second half of the year. This result is judged to be influenced by the weather in the summer of 2020. The torrential rain in the summer of 2020 resulted in a higher force of erosion than that of deposition. In summary, the tendency for erosion is more significant than that of sedimentation, especially in the main channel area of the Nakdong River.

• KSBB Journal
• /
• 제26권4호
• /
• pp.277-282
• /
• 2011

The penetration of outside material into skin is not easy. It is since the skin, which is a very hard barrier, protects the body against outside chemical and physical stimulation. Microneedle system which can help improve drug penetration into skin is advancing variously in transdermal drug delivery system (TDDS) in the field of skin care. After inserting microneedle into skin by using electrical or artificial forces, it makes microhole and drug penetration easily and induces natural skin rejuvenation. Diffusion and penetration of drug by optical and electrical force of microneedle is better for fast and effective TDDS. This is more developed than the traditional method such as the manual stamp, roller, and meso gun. The drug absorbed into dermal layer by microneedle helps revive and repair damaged skin. In the future, utilization of microneedle for skin care will progress constantly because of its human-friendly biodegradable materials and the development of the no pain microneedle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.103-108
• /
• 2001

The structure of hard disk drive(HDD) is excited by dynamic motion of a disk-spindle motor, and it makes sound noise. Therefore, the cover and the base of HDD should be designed to reduce noise and vibration induced by spindle motor. The prediction technique of sound pressure level(SPL) of a given structural shape enables us to design a cover and a base with much less vibration and noise. In this paper, we measured the force of disk-spindle motor and predicted SPL from HDD by computational simulation. To get a SPL of HDD by computational simulation, modal analysis and forced vibration analysis were performed with ANSYS, and sound radiation was computed using SYSNOISE. The calculated results were compared with experimental results and a good agreement was obtained. With this computer simulation procedure and design of experiment(DOE), optimal thickness of noise barrier and damper was calculated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.263-266
• /
• 2003

The gate leakage current is first calculated using the experimental method between gate and drain by opening source electrode. Next, the gate to drain current has been obtained with a ground source. The difference of two current has been tested and provide that the existence of another source to Schotuy barrier height against the image force lowering effect.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.124-125
• /
• 2012

Korea institute of materials science (KIMS) use a linear deposition source called as a closed drift linear plasma source (CDLPS) as well as dual magnetron sputtering (DMS) to deposit SiOxCyHz films in $HMDSO/O_2$ plasma. The CDLPS generates linear plasma using closed drifting electrons and can reduce device degradations due to energetic ion bombardments on organic devices such as organic photovoltaic and organic light emission diode by controlling an ion energy. The deposited films are investigated by Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). Optical emission spectroscopy (OES) is used to measure relative radical populations of dissociation and recombination products such as H, CH, and CO in plasma. And SiOx film is applied to a barrier film on organic photovoltaic devices.

• 한국터널지하공간학회 논문집
• /
• 제11권4호
• /
• pp.395-401
• /
• 2009

장대터널의 환기 및 방재시스템 설계시 주요한 요소설계인자 중 하나인 자연환기력은 그 중요성에도 불구하고 관련 영향변수들의 상호관계는 정량화가 매우 복잡하여, 자연환기력에 의한 유입 자연풍에 관한 설계기준을 정량적 근거하에서 제시하고 있지 못하다. 최근 발생한 터널화재에 의한 문제 및 터널 이용자에 의한 보다 나은 공기질에 대한 요구 등으로 터널 환기시스템의 최적화가 시급히 필요하며, 따라서 최적화의 주요 설계인자인 자연환기력에 대한 연구가 절실히 요구된다. 본 연구에서는 국내 최장대 도로터널로 계획된 인제터널(연장 10.9 km)을 대상으로 자연환기력의 예측을 목적으로 하였다. 지형적 요인에 의한 외부풍의 풍압에 기인하는 자연환기력의 최대 가능수준을 예측할 수 있는 기압장벽고의 개념을 적용하여 외부풍에 의한 자연환기력을 추정하고 터널내외부 공기 밀도차로 인한 굴뚝효과에 따른 자연환기력을 동시에 분석하였다.