Browse > Article
http://dx.doi.org/10.20910/JASE.2017.11.6.56

Measurement of Thrust Induced by the Dielectric Barrier Discharge in Cylinder Pipes  

Joo, Chan Kyu (Dept. of Mechatronics Engineering, Chungnam National University)
Kim, Jong Hoon (Dept. of Mechatronics Engineering, Chungnam National University)
Furudate, Michiko Ahn (Dept. of Mechatronics Engineering, Chungnam National University)
Publication Information
Journal of Aerospace System Engineering / v.11, no.6, 2017 , pp. 56-63 More about this Journal
Abstract
Thrust force induced by the dielectric barrier discharge inside of cylinder pipes is measured for various conditions. The input peak-to-peak voltage and frequency are varied from 2 to 9 kVpp and from 5 to 15 kHz, respectively. The height of cylinder is varied from 50 to 100 mm. The results of the measurements show that the magnitude of the generated thrusts increases as the voltage and the frequencies increase. It also shows that the generated thrusts are decreased according to the increase in the height of the cylinder. The cause of the thrust decrease is discussed in terms of energy losses due to the frictions on the wall surface.
Keywords
Dielectric Barrier Discharge; Thrust Measurement; Flow control;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Y. Sung, W. Kim, M. G. Mungal, and M. A. Cappelli, "Aerodynamic modification of flow over bluff objects by plasma actuation," Experiments in Fluids, vol. 41, no. 3, pp. 479-486, Aug. 2006.   DOI
2 K.-S. Choi, T. Jukes, and R. Whalley, "Turbulent boundary-layer control with plasma actuators," Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 369, no. 1940, pp. 1443-1458, Apr. 2011.   DOI
3 W.-R. Shim, E.-J. Park, K.-D. Kim, Y.-S. Kim, S.-H. Park, J.-H. Roh, "Design of flap devices driven by SMA spring actuators," Jouranl of Aerospace System Engineering, Vol.4, No.4, pp.11-17, December, 2010.
4 .Y. Park*, H. Kang**, J. Chung*, H.-C. Lee, "Optimization of Flap Shape and Position for Two-dimensional High Lift Device," Jouranl of Aerospace System Engineering, Vol.7, No.3, pp.1-6, September, 2013.
5 .A. V. Likhanskii, M. N. Shneider, S. O. Macheret, and R. B. Miles, "odeling of dielectric barrier discharge plasma actuator in air," Journal of Applied Physics, vol. 103, no. 5, p. 053305, Mar. 2008.   DOI
6 D. P. Rizzetta and M. R. Visbal, "Large Eddy Simulation of Plasma-Based Control Strategies for Bluff Body Flow,"AIAA Journal, vol. 47, no. 3, pp. 717-729, Mar. 2009.   DOI
7 Y. Suzen and G. Huang, "Simulations of Flow Separation Control using Plasma Actuators," AIAA paper 2006-877, 2006.
8 D. Guillaume and R. Francois, "Numerical Modeling of Dielectric Barrier Discharge Based Plasma Actuators for Flow Control the COPAIER/CEDRE Example," Aerospace Lab, Issue 10, AL10-05, ONERA, 2015.
9 M. Forte, J. Jolibois, J. Pons, E. Moreau, G. Touchard, and M. Cazalens, "Optimization of a dielectric barrier discharge actuator by stationary and non-stationary measurements of the induced flow velocity: application to airflow control," Experiments in Fluids, vol. 43, no. 6, pp. 917-928, Dec. 2007.   DOI
10 A. R. Hoskinson, N. Hershkowitz, and D. E. Ashpis, "Force measurements of single and double barrier DBD plasma actuators in quiescent air," Journal of Physics D: Applield Physics, vol. 41, no. 24, p. 245209, 2008.   DOI