• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.43-56
• /
• 1998

A barge-type structure has been recently watched since The Floating Structures Association of Japan proposed the new concept as the most suitable one of floating airports. In this paper, the method, which is based on a combination of a three-dimensional source distribution method and the wave interaction theory is applied to very large floating structure of barge-type. The calculated results show good agreement with the experimental and calculated ones by Yago and remarkable characteristics concerning the hydroelastic behavior of the very large floating structure on the effects of hydrodynamic interactions and choice of body modelling.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.71-76
• /
• 2005

This paper describes basic structural design for the large floating crane barge of fixed undulation type. Structural analysis was performed separately after dividing the floating crane into two parts, The crane part was composed of jib boom, back stay and back tower and the barge part supported the crane part. The structural strength for jib boom structural members are in compliance with JIS B 8821 and scantling of all barge structural members are in compliance with the requirement of KR (Korean Register of Shipping) Steel Barges and Rules for Classification of Steel Ships. For the structural analysis of large floating crane, MSC/NASTRAN and MSC/PATRAN software were used.

• Journal of Navigation and Port Research
• /
• v.35 no.2
• /
• pp.113-119
• /
• 2011

This paper is a part of the development on the safe navigation model of tugs and barges in Korea waters. desk-top tug-barge simulator is to train the crew of tugs and barges, especially tugs' crew. It is connected with steering and engine telegraph console and winch control console, and can describe three types of operation mode for a tug-barge working unit, towing mode, side by side and push mode. It can also record and assess each simulation run. The evaluation module can confirm the result of a finished simulation run and help trainees to find and correct their faults, and it is composed of result evaluation and process evaluation.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.9-26
• /
• 2001

In this paper. the development of a pusher-barge hull form which enables the continuous transportation along the coast and canal is performed. For the design stage of the hull forms. these are developed for Kyungin canal which is will be drawn up as the next contribution project of the Korean government are adopted. The model tests for the designed ship are carried out in the Inha University Towing Tank and the numerical simulations are done with a finite difference method based on MAC scheme. At first, the experiments are performed with designed model ships from low speed to high speed including service speed(6knots) among the corresponding designed speed. Resistance characteristics of designed ships are compared with experimental results of other several pusher-barge hull shapes. Next, the numerical simulations are performed for three cases, that is pusher only, barge only and pusher-barge condition in the designed speed. Each calculations are carried out in deep and restricted water condition. The flow characteristics around hulls in the latter condition are compared with those in the former condition.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.741-746
• /
• 2010

It is necessary to estimate more accurately the resistance of barge in still water and waves to compute the break load of towline and towing power for safety towing performance. The method proposed by government has calculated the total resistance of barge which is composed of frictional resistance, wave making resistance and air resistance considering the shape of hull and towing speed. However, the added resistance is equally applied with the significant wave height regardless of the type of vessels. In this study, we have carried out the numerical calculation to estimate the added resistance of wigley model in waves and compared with the experiment data to confirm the accuracy of the method. Then the computation was executed for the barge varying shape of the bow. As a result, added resistance of barge was differently occurred i.e. 0.3∼1.1 ton according to encounter angle, 0.4∼1.2 ton according to towing speed and 0.5∼1.1 ton according to shape of bow.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.179-185
• /
• 2011

A marine collision accident occurred at the Jin-do water way. A barge loaded with heavy equipment of Power Generation Plant was being towed at its side by two tugs "A" and "B" from Byeg-pa harbour to the designated position to be used for power generation plant near Jin-do bridge. The Power Generation Plant was 40-meters high loaded atop the barge. When the "tugs and tow" were approaching the Jin-do the bridge, the two towing tugs lost maneuvering control of the barge and it went off-course, hit first the waterway embankment and finally struck the lower part of bridge's span and post musing the barge to capsize and sunk its cargo into the sea. The bridge also suffered damages where the top of the Plant struck At the time of the accident, there was a strong tidal current at the waterway. This paper calculates the safe towing force of barges with heavy loads when traversing in a strong tidal current situation in narrow waterway.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.27-32
• /
• 2011

Recently, a ship-shaped barge has been developed to improve the resistance performance, as well as course-keeping capability. However, the stern of the barge is still similar to a box shape, and the vortex generated at the side of the barge creates drag and yaw instability. In order to solve this problem, stern skegs are normally used. The present paper deals with the correlation between the size of the stern skegs and the barge dimensions and hull coefficient. A stern skeg was designed to prevent yaw instability and minimize any additional resistance. The resistance test and course keeping test were performed in the towing tank at Pusan National University. To determine the correlation parameters between the designed stern skeg size and barge dimensions, a parametric study was also performed. Based on the experimental data from five barges, the optimum skeg dimensions were successfully derived. It is expected that the validation of the present study will be carried out by further experiments and computational comparisons in the near future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.283-291
• /
• 2006

Recently, a logistics between south and north Korea is rising rapidly by increasing of economical exchange between two Korea and growth of Gaeseoung Industrial Complex. Considering this trend of economic cooperation between two Korea, in addition to a land transportation route it is necessary to secure various logistics and transportation route. A barge transport system which has merits such as a little initial investment and convenience of harbor loading/unloading has been also used to transport freight widely in the EU and USA. In this paper, firstly, a social and economical feasibility study is performed about a shipping route which is using barge transportation system between Incheon and Gaesung. And also we propose several candidate shipping route and investigate a technical feasibility on a realistic possibility of shipping service by some investigation activities. Finally, the optimized shipping route and barge transportation system are proposed in this paper.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.7-14
• /
• 2007

Recently, freight floe between south and north Korea is rising rapidly by increasing cf economical exchange between two Korea and growth of Gaeseoung Industrial Complex. Considering this trend of economic cooperation between two Korea, in addition to a land transportation route it is necessary to secure various logistics and transportation route. A barge transport system which has many merits such as a little initial investment and convenience of harbor loading/unloading has been also used to transport freight widely in the EU and USA. In this paper, firstly, a Gaeseoung industrial complex and its cargo transport are investigated and several candidate shipping routes which are using barge transportation system are proposed. And also we investigate a technical feasibility on a realistic possibility of shipping routes by some investigation activities. Finally, a suitable barge system of candidate shipping route(1) and(2) is proposed in this paper.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.40-41
• /
• 2009

In general, ships are towed to keep the safe operations in harbor or channel by tug boats. Due to increase in ocean traffic, many accidents are happened in harbor or channel in these days. Therefore it is necessary to predict manoeuvrability of tug-barge system, and to assure the safety of that system. Turg-barge system is composed of tug boat, barge, and towing cable, connecting both ships. Manoeuvring equations of tug-barge system are suggested, and the scopes of model tests are discussed to establish the mathematical models for tug boats in this paper.