• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.157-167
• /
• 2004

A stoichiometric mixture of evaporating materials for $CuAlSe_{2}$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $CuAlSe_{2}$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $680^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuAlSe_{2}$ single crystal thin films measured with Hall effect by van der Pauw method are $9.24{\times}10^{16}cm^{-3}$ and $295cm^{2}/V{\codt}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuAlSe_{2}$ obtained from the absorption spectra was well described by the Varshni's relation, $E_{g}(T)$ = 2.8382 eV - ($8.68{\circ}10^{-4}$ eV/K)$T^{2}$/(T + 155 K). The crystal field and the spin-orbit splitting energies for the valence band of the $CuAlSe_{2}$ have been estimated to be 0.2026 eV and 0.2165 eV at 10 K, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_{5}$ states of the valence band of the $CuAlSe_{2}$. The three photocurrent peaks observed at 10 K are ascribed to the $A_{1-}$, $B_{1-}$, and $C_{1-}$ exciton peaks for n = 1.

• Journal of Sensor Science and Technology
• /
• v.23 no.1
• /
• pp.51-57
• /
• 2014

The evaporating materials for $MgGa_2Se_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $MgGa_2Se_4$ compounded polycrystal powder was deposited on thoroughly etched semi-insulated GaAs(100) substrate by the hot wall epitaxy (HWE) method system. The source and substrate temperatures of optimized growth conditions, were $610^{\circ}C$ and $400^{\circ}C$, respectively.The source and substrate temperatures were $610^{\circ}C$ and $400^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by double crystal X-ray diffraction (DCXD). The temperature dependence of the energy band gap of the $MgGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=2.34\;eV-(8.81{\times}10^{-4}\;eV/K)T^2/(T+251\;K)$. After the as-grown $MgGa_2Se_4$ single crystal thin films was annealed in Mg-, Se-, and Ga-atmospheres, the origin of point defects of $MgGa_2Se_4$ single crystal thin films has been investigated by the photoluminescence (PL) at 10 K. The native defects of $V_{Mg}$, $V_{Se}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Se-atmosphere converted $MgGa_2Se_4$ single crystal thin films to an optical n-type. Also, we confirmed that Ga in $MgGa_2Se_4$/GaAs did not form the native defects because Ga in $MgGa_2Se_4$ single crystal thin films existed in the form of stable bonds.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.1
• /
• pp.22-27
• /
• 2017

$TiO_2$ films, thickness of $1{\sim}30{\mu}m$ were deposited on glass substrate at room temperature by room temperature granule spray in vacuum. The starting powder was calcinated at $600^{\circ}C$ for 4 h using $Al_2O_3$ crucible in the furnace. The particle size of the $TiO_2$, $1.5{\mu}m$ was measured by a particle size analyzer. The effect of different process parameters such as number of pass, gas flow rate and feeder voltage was studied. As the number of passes increased, the film thickness increased proportionally due to adequate kinetic energy conserved. The effect of three different flow rates (i.e. 15, 25, and 35 LPM) on deposited film was investigated. As gas flow rate increased, the film thickness increased up to 25 LPM and then decreased. Higher feeder voltage with low flow rate of 15 LPM resulted in unsufficient coating thickness due to insufficient kinetic energy. Microstructure of $TiO_2$ films was investigated by scanning electron microscope and high resolution tramission electron microscope.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.68-88
• /
• 2013

This study is to analyze teacher's recognition and needs of STEAM education in specialized high schools for technical fields. For this study, survey using questionnaire was applied to teachers in specialized high schools for technical fields. This study includes the recognition and the needs on STEAM education of general and industrial subject teachers in specialized high schools for technical fields. In order to carry on this study, 655 questionnaires were collected from teachers of 16 specialized high schools for technical fields in the whole country. Practically, 611 questionnaires (257 of normal subject teachers and 398 of industrial subject teachers) were used for this study. As a result, it is known that the needs of STEAM education is larger to industrial subject teachers than general subject teachers. But it is disclosed that STEAM education is more difficult to general subject teachers than industrial subject teachers. In requirements of teaching-learning, general subject teachers only required reference materials, but industrial subject teachers needed STEAM lesson under the same subjects and data sharing system as a priority. General and industrial subject teachers also considered education program development for creative thinking skills and problem solving abilities as a priority. Finally, in the administrative and financial requirement, both of them demand to reduce administrative tasks as a priority.

• Journal of Gastric Cancer
• /
• v.18 no.1
• /
• pp.30-36
• /
• 2018

Purpose: We investigated complications after laparoscopic sentinel basin dissection (SBD) for patients with gastric cancer who were enrolled in a quality control study, prior to the phase III trial of sentinel lymph node navigation surgery (SNNS). Materials and Methods: We analyzed prospective data from a Korean multicenter prerequisite quality control trial of laparoscopic SBD for gastric cancer and assessed procedure-related and surgical complications. All complications were classified according to the Clavien-Dindo Classification (CDC) system and were compared with the results of the previously published SNNS trial. Results: Among the 108 eligible patients who were enrolled in the quality control trial, 8 (7.4%) experienced complications during the early postoperative period. One patient with gastric resection-related duodenal stump leakage recovered after percutaneous drainage (grade IIIa in CDC). The other postoperative complications were mild and patients recovered with supportive care. No complications were directly related to the laparoscopic SBD procedure or tracer usage, and there were no mortalities. The laparoscopic SBD complication rates and patterns that were observed in this study were comparable to those of a previously reported trial. Conclusions: The results of our prospective, multicenter quality control trial demonstrate that laparoscopic SBD is a safe procedure during SNNS for gastric cancer.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.27-38
• /
• 2007

IPv6 has appeared for solving the address exhaustion of IPv4 and for guaranteeing the problems of security and QoS. It occurs the unexpected new attacks of IPv6 as well as the existing attacks of IPv4 because of the increasing address space to 128bits and the address hierarchies for efficient network management and additions of the new messages between nodes and routers like neighbor discovery and auto address configuration for the various comfortable services. For the successful transition from IPv4 to IPv6, we should get the secure compatibility between IPv4 hosts or routers working based on secure and systematic policy and IPv6. Network manager should design security technologies for efficient management in IPv4/IPv6 co-existence network and IPv6 network and security management framework designation. In this paper, we inspected the characteristics of IPv4 and IPv6, study on security requirement for efficient security management of various attacks, protocol, service in IPv4/IPv6 co-existence and IPv6 network, and finally suggest integrated solution about security vulnerability of IPv6 network in considering of analysis of IPv6 system, host and application, IPv6 characteristics, modified CGA(MCGA).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.134-143
• /
• 2020

This study investigated the status of infectious disease inpatients at long-term care hospitals in Korea. A descriptive study was conducted on patients with 14 infectious diseases at 798 long-term care hospitals during 2016-2017. The number of infected patients, total admission days, and total medical expenses were higher in 2017 than in 2016. The most common infectious diseases were enterocolitis due to Clostridium difficile, influenza, and scabies. The number of hospitals with patients who had enterocolitis due to C. difficile and resistance to carbapenem was higher in 2017 than in 2016. Hospitals with 150-299 beds had higher numbers of infectious disease patients than those with under 150 or over 300 beds. Therefore, intensive efforts are needed to control the most common diseases at long-term care hospitals, such as enterocolitis due to C. difficile, influenza, and scabies. It is recommended to apply relevant guidelines related to infection control management as well as implement educational programs. It will also be necessary to develop applicable infection monitoring standards and support the facilities and health workforce of long-term care hospitals under 300 beds through an effective infection surveillance system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.22-32
• /
• 2003

The purpose of this study is to analyze soil erosion quantity of a basin by using DEM, soil map and landuse map and to find a soil erosion hazard zone in a basin based on this data. In this study, RUSLE was used to analyze soil loss quantity and the research area chosen is Mushim stream which branches off the Geum river. This study used a mean annual precipitation of Cheongju Meteorological Observation was used as a hydrological data and DEM, the detailed soil map(1/25,000), the landuse map collected respectively from Ministry of Environment, National Institute of Agricultural Science and Technology and Ministry of Construction and Transportation. The subject map was drawn to analyze soil erosion hazard zone by using the above data and maps. According to the results of the analysis, a lot of soil loss shows in a bare area. In case of a forest, a slope has a lot of influence on soil loss. The integration and analysis of the above gave the result that $193,730.3m^2$corresponding to 8.5% of the places of which the slope is over 20 degree in a bare area was found to have a higher chance of soil erosion.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.23-30
• /
• 2003

In this study, the various load cases by specified by the IEC61400-1 international specification and GL Regulations for the wind energy conversion system were considered, and a specific composite structure configuration which can effectively endure various loads was proposed. In order to evaluate the structure, the structural analysis for the composite wind turbine blade was performed using the finite element method(FEM). In the structural design, the acceptable configuration of blade structure was determined through the parametric studies, and the most dominant design parameters were confirmed. In the stress analysis using the FEM, it was confirmed that the blade structure was safe and stable for all the considerd load cases. Moreover the safety of the blade root joint with insert bolts, newly devised in this study, was checked against the design loads and also the fatigue loads. The fatigue life for operating more than 20 years was estimated by using the well-known S-N linear damage rule, the load spectrum and Spera's empirical equations. The full-scale static test was performed under the simulated aerodynamic loads. from the experimental results, it was found that the designed blade had the structural integrity. Furthermore the measured results were agreed with the analytical results such as deflections, strains, the mass and the radial center of gravity. The studied blade was successfully certified by an international institute, GL, of Germany.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.1
• /
• pp.31-44
• /
• 2017

The aim of this study is to evaluate the accuracy and variability of the oak pollen concentrations over the Seoul metropolitan region (SMR) simulated by the Community Multiscale Air Quality (CMAQ)-based pollen dispersion model, which is the CMAQ-pollen model integrated with the improved oak pollen emission model(PEM-oak). The PEM-oak model developed is based on hourly emission flux parameterization that includes the effects of plant-specific release, meteorological adjustment, and diurnal variations of oak pollen concentrations. A 33 day-run for oak pollen simulation was conducted by the CMAQ-pollen model with a 3 km spatial resolution for the SMR during the 2014 spring pollen season. Modeled concentrations were evaluated against the hourly measurements at three Burkard sampling sites. Temporal variations of oak concentrations were largely well represented by the model, but the quantitative difference between simulations and measurements was found to be significant in some periods. The model results also showed that large variations in oak pollen concentrations existed in time and space and high concentrations in the SMR were closely associated with the regional transport under strong wind condition. This study showed the effective application of the CMAQ-pollen modeling system to simulate oak pollen concentration in the SMR. Our results could be helpful in providing information on allergenic pollen exposure. Further efforts are needed to further understand the oak pollen release characteristics such as interannual variation of the oak pollen productivity and its spatio-temporal flowering timing.