• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.359-365
• /
• 2018

Herein, electromagnetic shielding structures to reduce the external noise coupling to printed spiral coils (PSCs) and a design method for improving the bandwidth of shielded PSCs have been proposed. It has been demonstrated that the bandwidth of shielded PSCs is limited due to the parasitic capacitance between the coils and the shielding structures and is confirmed by the transfer function simulation of the shielded PSCs with a transmission line as the radio-frequency interference noise source. A design method for the bandwidth improvement of the shielded PSCs has been proposed based on the equivalent circuit model analysis and the case studies depending on PSC designs with a three-dimensional field simulation. With the design method, an optimized shielded PSC design has been presented and successfully confirmed by experimental verification in that the optimized design results in a significant bandwidth improvement.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3011-3018
• /
• 2000

On ATM networks, ABR services are provided using the remained bandwidth after allocating CBR and VBR traffic. Realtime services such as transmitting audio or video data may be provided using CBR and VBR which have a constrained transmission delay, but in these cases, the communications bandwidth may be wasted. This paper proposes an efficient bandwidth allocation algorithm to transfer real-time data using ABR service. The proposed algorithm guarantees MCR and allocates bandwidth to each connection proportional to its MCR. The proposed algorithm divides the connections in two groups - a satisfied state group and a bottlenecked state group - and enhances bandwidth utilization by allowing the remained bandwidth after allocating the connections in the satisfied state to be allocated to the connections in the bottlenecked state. Our algorithm uses a Queue control function proposed by Ghani[5] to keep the Queue length within some boundary, which makes the transmission delay constant. We simulate and compare the performance of the proposed algorithm with that of the algorithms proposed by ATM Forum[1] and Kalampoukas[2].

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11
• /
• pp.3479-3489
• /
• 2000

Most of the study on fairness control method for Distributed-Queue Dual-Bus(DQDB) have been performed under specific load types such as equal probability load types or symmetric load types. On Web-based internet enviroments client-server load types are more practical traffic patlerns than specrfic load types. In this paper, an effiective fairness control method to distribute DQDR network bandwidth fairly to all stations under a client-server load is proposed. In order to implement a dynamic bandwidth timing capabihty needed to distribute the bandwidth fairty at heavy loads, the proposed method uses two pararnetexs, one is an access hrnit to legulate each station's packet transmission and the other is the number of extra emply slots that are yielded to downstream stations. In point of implementation this mechanism is simpler and easier than Bandwidth Tuning Mechanism(BTM) that uses an intermediate pattern and an adptation function. Simulation results show that it outperforms othen mecharusms.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.217-220
• /
• 2000

This paper studies a real-time VBR traffic characterization. There are two big approaches to determine traffic. One is a statistic approach and the other is a deterministic approach. This paper proposes a new constraint function, what we called “Sub-Sum Constraint Function”(SSCF). This function is mainly based on a deterministic approach and uses a statistic approach. It predicts and calculates the next rate with a present information about the stream. SSCF captures the intuitive bounded by a rate lower than its peak rate and closer to its long-term average rate. This model makes a order of the constraint function much less than any other works (O(n)). It can also be mapped on a token bucket algorithm which consists of r (token rate) and b (token depth). We use a concept, EB(effective bandwidth) for a utility of our function and comparing with other techniques such as CBR, average VBR. We simulated 21 multimedia sources for verifying the utility of our function.

• Journal of the Korean Statistical Society
• /
• v.30 no.2
• /
• pp.265-280
• /
• 2001

Estimation of the edge of a distribution has many important applications. It is related to classification, cluster analysis, neural network, and statistical image recovering. The problem also arises in measuring production efficiency in economic systems. Three most promising nonparametric estimators in the existing literature are introduced. Their statistical properties are provided, some of which are new. Themes of future study are also discussed.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.175-181
• /
• 1999

There are issues regarding how some of traffic parameters should be set so that ATM and non-ATM service parameters can be compatible. For example, policing method used by frame relay based on CIR(committed information rate) will not exactly match the ATM UPC(Usage Parameter Control) method. ATM and the frame relay have different transfer modes and traffic parameters. The cells and frames are police by their own traffic control schemes. For the same information, the real traffic of the ATM side takes greater bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. IN both networks this bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. In both networks this bandwidth ratio should be considered on traffic parameter mapping to maintain their QoS and to perform efficient network resource management. In this paper we describe traffic parameter mapping schemes between frame relay and ATM in ATM network and how to expect the bandwidth ratio to maintain FR QoS in ATM network. We assumed frame length distribution to Erlang or Exponential probability density function.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.110-118
• /
• 2006

In part-I of the paper, two sub-channel structures, either contiguous or distributed, were considered. Modeling the SNR distribution over a sub-channel as Ricean in general, the statistical chracteristics were investigated. In this part of the paper, we develop a generalized two step channel/resource allocation algorithm, which incorporates the two statistical measurements, and analyze the spectral efficiency of OFDMA in terms of average frequency utilization for the two sub-channel structures. In OFDMA with distributed structure, the key design parameter would be the sub-channel bandwidth. To give an insight into the impact on this parameter, we show in the numerical results the frequency utilization as a function of sub-channel bandwidth normalized to coherence bandwidth. As confirmed by numerical results, for contiguous sub-channel structure, we obtain the nominal multiuser diversity gain when the sub-channel bandwidth is smaller than the coherence bandwidth and lose the gain as it is getting larger.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.125-135
• /
• 2003

In this paper, we developmed and implemented router and bandwidth broker that provides end-to-end QoS in differentiated service IP networks. Our design goal is to provide end-to-end premium service using the EF PHB. The bandwidth broker and router were implemented in the FreeBSD 4.6 platform. For the DiffServ router, we implemented QoS daemon, rollback managment routine, monitoring, and COPS-PR client. Also, Ive implemented bandwith broker which has SLS and resource management function, and signaling protocols for interfacing intra-and inter-domain. On the testbed, we have validated and evaluated the performance of the implemented DiffServ router and bandwidth broker using the inter-domain signaling protocol client in MS Windows platform. The test results show that the end-to-end QoS can be guaranteed for the inter-domain diffServ by the implemented system.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.241-250
• /
• 2016

AVM(Around View Monitoring) is a function of ADAS(Advanced Driver Assistance Systems), which provides a bird's eye view of the surroundings of a vehicle to the user. AVM systems require large bandwidth since they are composed of four input images and require real-time processing for vehicle-embedded environments. Also, the memory bandwidth requirement increases greatly when the resolution of the input data is higher. In this paper, we propose four basic hardware models of AVM systems. The models are decided by whether or not there is a valid data extraction module and an image processing purpose LUT generation module. We analyze the required bandwidth and hardware resource for each model. For verification of the proposed models, we implemented an AVM system using XC7Z045 FPGA and DDR3 memory for VGA and FHD resolution. All four of the proposed hardware model is executed below 33ms, which shows that it can operate in real-time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.270-281
• /
• 2003

E-PON supports efficiently the increased Internet data traffic and efficient bandwidth assignment function by which the shared upstream bandwidth in the broadband access networks. In this paper, when different types of incoming sources are mapped into QoS-aware source and Best-Effort(BE) source, we propose the Dual-GPS schedulaer in E-PON that has the characteristics to provide delay and delay-constraint application, and maximizes the bandwidth to best-effort service. When transmit upstream data in E-PON, The proposed scheme supports the control capabilities of delay and delay-variation for required QoS flow through the novel bandwidth assignment scheme. Simulation results show our scheme outperforms the conventional bandwidth allocation scheme in controlling the delay and delay-variation of E-PON system.