• 한국전자통신학회논문지
• /
• 제13권5호
• /
• pp.965-970
• /
• 2018

본 논문에서는 두 장의 기판을 이용하여 접힌 기판 집적형 도파관 구조의 활용을 위한 트랜지션이 제안되었고, 이러한 FSIW 구조는 간단한 대역통과 필터로 응용되었다. FSIW 구조는 SIW 구조와 유사한 특성을 가지며 도파관의 장축을 반으로 줄일 수 있다는 장점이 있다. FSIW 구조의 트랜지션은 접지에 연결된 ${\lambda}g/4$ 선로를 이용하여 설계되었고, FSIW 구조의 대역통과 필터는 5단의 타원함수 특성을 갖는 저역통과 필터를 FSIW 구조의 입출력부에 연결하여 설계하였다. 제작된 FSIW 구조의 대역통과 필터는 중심주파수 5.75 GHz, 대역폭 33.2%를 가졌고, 중심주파수에서 삽입 손실과 반사 손실은 각각 0.63dB와 19.1dB를 가졌다.

• 한국정보통신학회논문지
• /
• 제4권4호
• /
• pp.825-834
• /
• 2000

본 논문에서는 비아-홀 접지를 고려한 K-대역 인터디지트 대역통과필터를 설계하였다. 중심 주파수가 19.6GHz에서 25~30%대역만을 통과시키기 위해 6차 인터디지트 대역통과 필터를 마이크로 스트립라인으로 구성하였으며 비아-흘의 수에 따른 필터의 특성을 분석하였다. 비아-흘 접지와 인터디지트 대역통과필터는 설계 최적화 과정을 통하여 통과대역에서 중심주파수와 대역폭관계를 만족시킬 수 있었으며 실제 제작후 측정결과 중심주파수는 19.150Hz 삽입손실은 -4.IdB, 반사계수는 -16.7dB로 비아-홀 접지의 영향을 고려한 설계가 이루어짐을 증명하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.795-798
• /
• 1998

In this paper, a new class of bandpass filter using a modified Chebyshev lowpass filter function is described. The prosposed bandpass filter which exhibits diminishing ripples in the passband has maximum value at the center frequency. Due to the lower pole-Q, the performance in the frequency and time domains is improved as compared with the classical Chebyshev bandpass filter.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1728-1735
• /
• 1989

A design procedure for microstrip bandpass filters using step impedance resonators (SIR's) and tapped input/output to a conventional parallel coupled line bandpass filter is presented. The filter configuration consisting of both half-wavelength and SIR's suppreses to spurious resonance response near the second harmonics, while tapping techniques offer benefit in situations where the impractical. The measured frequency responses of the designed filter are in close agreement with the computed responses.

• 한국전자파학회지:전자파기술
• /
• 제2권4호
• /
• pp.10-16
• /
• 1991

A microstrip bandpass filter using stepped impedance resonators and tapped input / output is realized with Teflon substrate, whose center frequency is 3.5 GHz and fractional bandwidth is 20%. In order to realize a wider bandwidth of 30%, the Crystal's design method and the input / output tapping scheme are used. Another microstrip filter designed as mentioned above is realized with Epsilam-10 substrate. This case shows good agreement between the theoretical responses and the measured ones.

• 전기의세계
• /
• 제31권2호
• /
• pp.141-146
• /
• 1982

In this paper, surface acoustic wave (SAW) bandpass filter is designed using the Fourier series approach and the I$_{0}$-shin window function. And also we studied a method to realize SAW filter using the apodized ID transducer which was fabricated with aluminum metallization of about 1500 A over .deg. thickness on Y-cut Z-propagating LiNbO$_{3}$, crystal by photolithographic technique (lift-off method). Experimental results on SAW bandpass filter responses show good agreements with the theoretical characteristics.s.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.268-271
• /
• 2004

An analytic design formula is proposed for a TEM mode dielectric bandpass filter with attenuation poles at desired frequencies in the stop band. In order to sustain the constant ripple in the passband due to attenuation poles, the initial resonant frequencies of the various resonators adopted in a filter with attenuation poles are newly calculated. The proposed design theory is verified by designing various bandpass filters with attenuation poles in the stop band.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.331-334
• /
• 2003

This letter presents the design and measured performance of bandpass filters based on a stacked-SIR (stepped impedance resonators) configuration with DGS (Defected Ground Structure). An unit DGS configuration is designed and analyzed to show the phase characteristic of proposed slow-wave structure. The SIR filter with DGS has been yielded better stop band and sharper skirt behavior than conventional bandpass filter.

• Journal of electromagnetic engineering and science
• /
• 제10권1호
• /
• pp.1-5
• /
• 2010

A spurious suppressed bandpass filter is proposed and discussed using the stepped impedance resonator(SIR) on a substrate-integrated waveguide(SIW) structure with a double-layer substrate. The second resonance of the fundamental $TE_{10}$ mode can be controlled by adjusting the electrical length and impedance ratio of each SIR. The spurious suppressed SIW bandpass filter shows the measurement results of the insertion loss of 3.98 dB and return loss of less than 11.58 dB at the center frequency of 12 GHz. Also, the second spurious frequency is improved to about $1.5f_0$ compared with $1.33f_0$.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2299-2304
• /
• 2011

In this paper, we propose the methodology to make the bandpass filters for the Smart Grid IED(Intelligent Electronic Device) smaller than the conventional bandpass filters. The size-reduction of the filters and the filter performances are indebted to devising small CRLH(composite right- and left-handed) resonators and coupling them as the metamaterial structures. The design methodology is validated by the equivalent circuit to be compared with the reliable full-wave EM simulation, and the proposed metamaterial filter outperforms the standard parallel-edge coupled filter with respect to the miniaturization and frequency response.