• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.41-48
• /
• 2004

이 논문에서 정 전압형 PFC 전자식 안정기에 대하여 제안하였다. 제안하는 PFC 전자식 안정기는 고효율 승압형 컨버터와 기존의 하프브리지 인버터를 조합한 것이다. 제안된 PFC 전자식 안정기는 전압 분압기와 소프트 스위칭기술을 사용하여 입력전류의 왜형과 입력전류의 고조파가 감소됨을 증명하였다. 형광램프에 대한 시뮬레이션결과는 이론적인 분석과 일치함을 나타내었다.

• 한국항행학회논문지
• /
• 제18권5호
• /
• pp.483-489
• /
• 2014

제안된 회로는 교류 입력 전원부와 무손실 스너버 회로가 부가된 DC-DC 컨버터와 DC-AC 변환을 위한 인버터로 구성하였다. 변환된 등가회로를 이용하여 형광램프의 특성을 만족시킬 수 있는 최적의 회로상수를 결정해서 설계함으로써 기존의 인버터 직류측에서 발생되는 맥동주파수에 의한 왜형파 발생을 제거하고 인버터의 입력전류를 불연속이 되도록 하므로써 맥동율과 스위칭 손실을 현저히 감소시켰다. 이러한 모든 결과를 증명하기 위하여 40 W 직관형 형광램프를 대상으로 실험하여 고조파의 발생을 측정한 결과 제안된 전자식 안정기의 우수성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2795-2797
• /
• 1999

Several power factor correction(PFC) circuits are presented to achieve high PF electronic ballast for both voltage-fed and current-fed electronic ballast. The proposed PFC circuits use valley-fill(VF) type DC-link stages modified from the conventional VF circuit to adopt the charge pumping method for PFC operations during the valley intervals. In voltage-fed ballast, charge pump capacitors are connected with the resonant capacitors. In current-fed type, the charge pump capacitors are connected with the additional secondary-side of the power transformer. The measured PF and THD are higher than 0.99 and 15% for all proposed PFC circuits. The lamp current CF is also acceptable in the proposed circuits. The proposed circuit is suitable for implementing cost-effective electronic ballast.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.166-168
• /
• 2007

A dimmable ballast system for the electrodeless fluorescent lamp is proposed. The proposed scheme is composed of the electronic ballast and the wireless communication part. They both are realized with one EPLD (Erasable Programmable Logic Device). The dimming levels of each lamps can be controlled by a management system through wireless communication technology. 10 ballasts are used for the group lighting system and the experiment results show the system works well.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.343-348
• /
• 2003

In this paper, a PFC(Power Factor Correction) electronic ballast with constant voltage-fed is proposed. The proposed PFC electronic ballast is combined of a High-efficiency boost converter and a conventional half bridge inverter. It is proved that the ripple of input-current and the input-current's harmonic of the proposed PFC electronic ballast are reduced using the voltage divider and soft-switching technique. It is demonstrated that simulation results for 40[W] fluorescent lamp correspond with theoretical analysis

• 조명전기설비학회논문지
• /
• 제18권1호
• /
• pp.9-14
• /
• 2004

본 논문에서는 내부 입자의 반경방향 분포와 구동회로를 고려한 형광램프 모델링을 수행하였다. 모델링에서 전자에너지 분포는 Maxwellian으로 가정하였으며, 전자 이동도와 유극성 확산계수는 상수를 사용하였다. 방전 중 수은원자는 6가지 에너지레벨을 갖는다고 가정하였다. 모델을 사용하여 4개의 편미분 2개의 상미분 연립방정식을 FDM과 2계 Runge-Kutta 방법을 사용하여 수치적으로 해를 구하였다. 개발한 모델을 실제 형광램프와 LR안정기 회로에 적용하여 실험적으로 측정한 전압, 전류 파형과 수치해석적으로 구한 전압, 전류 파형을 비교하여, 본 형광램프 모델링의 타당성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1184-1186
• /
• 2002

Recently, according to the industrial development relative to multimedia, demand of display system is radically increase, thus development for power supply of back-lighting is advanced lively. Fluorescent lamp operated at high frequency by the electronic ballast provide benefits like unnoticeable flicker effect and higher luminous efficiency. This paper presents analysis of Push-Pull type resonant inverter for CCFL drive for stable characteristic and life improvement of fluorescent lamp operated at high frequency. Also it has proposed design procedure of Current-Fed type resonant inverter. On the basis of equivalent circuit, component characteristic and suitable region of operation frequency from simulation using Matlab and Pspice is predicted. Suitability of applied equivalent model and validity of design process from the experimental results with CCFL inverter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.434-436
• /
• 1996

This paper investigates the optimal design of an electronic ballast of half bridge inverter type in consideration of the variation of ambient temperatures for a 15[W] triple-type compact fluorescent lamp. The performances of electronic ballasts under different values or the capacitance ratio in the resonant tank circuit are compared with each other in the practical temperature range between 15[$^{\circ}C$] and 35[$^{\circ}C$] to determine its optimum value. As a result, the optimum value is found to be such that $C_1/C_2=10$ at which value starting of the lamp is most stable and light output reaches its maximum value with lowest variation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.200-202
• /
• 2006

A impedance model simulating the electrical characteristics of the Electrodeless fluorescent lamp operated at high frequency is proposed. The model is constructed from a two parameter equation which is derived based on a set of two measurements. This is a readily constructed and computer simulator oriented model which is suitable for a preliminary design of electronic ballasts. Simulated and experimental results are used to verify the analytical discussions, and moreover, an electronic ballast design example using the proposed model is presented to further demonstrate ist applications.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1181-1186
• /
• 2008

A impedance model simulating the electrical characteristics of the External Electrode fluorescent lamp operated at high frequency is proposed. The model is constructed from a two parameter equation which is derived based on a set of two measurements. This is a readily constructed and computer simulator oriented model which is suitable for a preliminary design of electronic ballasts. Simulated and experimental results are used to verify the analytical discussions, and moreover, an electronic ballast design example using the proposed model is presented to further demonstrate its application.