• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.675-681
• /
• 2011

In this paper, we dealt with the design and fabrication of a medium pressure ultra-violet (UV) lamp and a magnetic ballast which are main components for ballast water treatment systems (BWTS). To acquire an optimal discharge condition of UV lamp, electrical and optical characteristics depending on the argon gas volume and the amount of mercury were experimentally analyzed. Rated voltage, current and power consumption of a prototype lamp were 490 [V], 8.6 [A] and 4.0 [kW], respectively. UV intensity of the lamp was 15 [%] higher than that of an equivalent lamp which is used in a BWTS. The magnetic ballast was designed in a UI core type through theoretical analysis and simulation. The open voltage and the rated power consumption of the ballast were 920 [V] and 8.5 [kVA] respectively. The disinfection efficacy which is carried out in a BWTS equipped with the UV lamp and magnetic ballast was over 99.99 [%], and this satisfy the IMO regulations.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.449-454
• /
• 1999

A new scheme of the automotive High Intensity Discharge (HlD) lamp ballast systems is proposed. The p proposed scheme consists of the high frequency IX DC converter and the low frequency DC-AC inverter, like t that the conventional HID ballast system. However, this system separates the input voltage of the ignitor from t the dc link voltage, which results in the use of lower voltage rating power devices for the HID lamp ballast s system, comparlu with convention띠 system. As a result, proposed system has a lower cost and higher e efficiency. This paper presents th$\varepsilon$ design and anlaysis of the propoSlU ballast and some 앉아、nmental results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2002

The electronic ballast have much more shaking of arc than magnetic ballast because of acoustic resonance phenomenon. but it has used mare than before. In this paper, we made metal halide lamp modeling by modifying modeling of mercury lamp. To avoid acoustic resonance phenomenon, We calculated acoustic resonance frequency band. We proposed design of LCC circuit. Also, electronic ballast simulator for metal halide lamp was developed by simulink LCC parameters of inverter was decided on the basis of simulation results. After development of prototype ballast, it was verified the characteristics of simulator.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.645-656
• /
• 2020

In this study (Part II), the empirical formulation of corrosion model of a ship's ballast tank was developed to predict nonlinear time-dependent corrosion wastage based on the advanced data processing technique proposed by Part I. The detail on how to propose generalised mathematical formulation of corrosion model was precisely documented in the previous paper (Part I). The statistical scatter of corrosion data at any exposure time was investigated by the refined method and formulated based on a 2-parameter Weibull distribution which selected the best fit PDF. Throughout the nine (9) steps, empirical formulation of the ship's seawater ballast tank was successfully proposed and four (4) key step results were also obtained. The proposed method in Part I was verified and confirmed by this application of seawater ballast tank, thus making it possible to predict accurate behaviours of nonlinear timedependent corrosion. Developed procedures and obtained corrosion damage model for ship's seawater ballast tank can be used for development of engineering software.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.881-882
• /
• 2012

• Ocean and Polar Research
• /
• v.33 no.2
• /
• pp.113-125
• /
• 2011

In order to assess the survival success of microphytoplankton species in ship ballast water, we examined microphytoplankton diversity from international commercial ships berthed at Ulsan and Pyeongtaek Ports, Korea, and also subjected them to laboratory studies. The ages of ballast water in each ship ranged from 1 to 365 days. Vessels originated from coastal China (Weihai, Lianyunsang and Shanghai), Chile, and from the Yellow and Pacific Oceans. The numbers of species and phytoplankton standing crops in uploaded ballast water were significantly related to the age of ballast water. The most diverse taxonomic group was diatoms. In the laboratory study, the value of in vivo fluorescence in M/V Spring Lyra gradually increased with increasing nutrients such as nitrate and phosphate. Phytoplankton in new (9 days), medium (31 days) and old (365 days) ballast water successfully survived under typical nutrient condition of port water and F/2 medium at $15^{\circ}C$ and $20^{\circ}C$, whereas phytoplankton in ballast water treatment did not survive, regardless of optimal temperature. Colonization process was dominated by diatoms; Skeletonema coastatum for M/V Spring Lyra, Thalassiosira pseudonana and Thalassiosira for M/V Han Yang, Thalassiosira pacifica and Odontella aurita for M/V Modern Express, and Chaetoceros pseudocurvisetus and Pseudo-nitzschia seriata for M/V Asian Legend. The successful establishment of non-native species was also related to nutrient richness. Our laboratory design can be applied as a practical tool to assess the survivability of invasive microphytoplankton introduced into local waters of Ulsan and Pyeongtaek.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.166-171
• /
• 2008

This paper presents high efficiency control system of automotive 35W electronic ballast for high intensity discharge(HID) lamp using switching flyback converter with variable frequency. Considering performance, size and efficiency of ballast, the flyback converter is designed with planar transformer in converter stage. HID lamp demands a highly efficient ballast and very complex control circuitry that can control complex transient state for applying to automotive. The proposed electronic ballast system is composed of a flyback converter using planar transformer, a full bridge inverter, and a step up igniter. In this system, switching frequency of flyback converter is controlled by varying input voltage of HID ballast and the price and the size of HID ballast using planar transformer can be reduced. The performance and efficiency of the posed system are verified through various the experiment results.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.79-85
• /
• 2016

In this study, we proposed a new single-stage small power MH lamp electronic ballast and power-factor correction circuit with improved circuit by the current of passive power factor correction. Main circuit integrates traditional DC/DC and DC/AC circuits into one-stage DC/AC inverter. Moreover, we described the working principle and control strategy of the new circuit; it's soft switching principle; and resonant element parameter design formula. An experimental prototype of HID lamp electronic ballast with output power of 70 W was built to verify the feasibility of the analysis and design. The simulation and experimental results proved that the power factor of this circuit could reach 94%, with efficiency of 90%. The input current harmonics conform to IEC 61000-3-2 standards and its cost is low. These superior performances of the new circuit indicate certain practical values.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1114-1118
• /
• 1992

This paper deals with the analysis of the electronic ballast which is based on half-bridge type series inverters. First, design basis was described for the determination of the values, L and C. Next, the operation of the electronic ballast was analyzed theoritically. Finally. the digital simulations and experiments were carried out to prove the obtained theoritical results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.409-415
• /
• 2008

This paper proposed a new optimal design method of the electronic ballast with stable run-up current for Metal Halide lamp during the ignition condition. In order to avoid operation in the acoustic resonance frequency band and to supply the optimal ignition current without demage of inverter switching components during the ignition period, the values of the series inductor Ls, the series capacitor Cs, and the parallel capacitor Cp were determined by analysis of characteristics of inverter transfer function depend on Lamp operating power and resistance of ignition condition and steady state operating condition. For the prototype ballast for a 400W Metal Halide Lamp, experimental results are presented in order to validate the proposed method.