• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.40-47
• /
• 2022

At present, the low-voltage, high-current type power supply is mainly used for effective sterilization in the ballast water treatment system. Research on PSFB converters without output capacitors has been ongoing. Such converters effectively treat ballast water without a separate disinfectant through electric pulses by applying a pulse-type power to the output electrode without an output capacitor. However, in the case of the pulse-type electrolysis treatment method, voltage overshoot can occur due to abrupt voltage fluctuations when the load changes, resulting in circuit reliability problems because of the output capacitorless system. Therefore, a new voltage control algorithm is required. In this paper, we will discuss voltage control for pulsed electrolysis topology without an output capacitor. The proposed voltage control method has been verified using Simulation and experiment. The usefulness of the proposed control method has been proven by the experimental results.

• 전력전자학회논문지
• /
• 제8권1호
• /
• pp.70-79
• /
• 2003

본 연구에서는 압전 변압기를 이용한 T5 28급 전자식 안정기를 제작하여 그에 관한 특성을 조사하였다. 제작된 전자식 안정기는 크게 정류부와 능동형 역률 개선 회로부, 마이크로 컨트롤러를 이용한 주파수 발진부와 피드백 제어 회로부, 그리고 하프-브리지 인버터 회로 및 압전 변압기포 구성하였다. 사용된 원칩 마이크로 컨트롤러(AT90S4433)는 주파수를 발진하는 발진 회로부와 형광램프에 인가된 전류값을 측정하여 램프의 구동여부를 판단하는 피드백 제어 회로부로 구성하였으며, 내부 프로그램에 의해 일정 주파수에서 주파수를 감소시킴으로서 램프 방전을 유도하고 방전을 확인 후 정상상태 구동을 하는 주파수 대포의 이동을 통해 형광램프에 일정한 출력을 유지하였다. 결과적으로 개발된 전자식 안정기는 기존의 자기식 안정기가 무겁고 부피가 크며 많은 손실과 깜박거림(Flicker)현상을 지니는 반면에, 75[kHz]대의 고주파수로 동작하면서 99.5[%]이상의 높은 역률과 12[%]이하의 낮은 총 고조파 왜곡률(THD), 그리고 1.5이하의 CF(Crest Factor)를 나타낸다. 따라서 본 연구에서 제작된 압전형 안정기근 기존의 안정기를 대체할 수 있으며, 소형 경량화 되고 높은 효율을 지니게 되므로 경제적 측면에서의 장점도 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.388-389
• /
• 2009

The use of arc tubes made of ceramic material further enhanced some of the metal halide lamp's properties. These properties translate into higher efficacy with better color rendering, stable color through lamp long life. Recently, due to an increase in the application of the ceramic metal-halide lamp, the study for the property etc. according to Ballast's driving scheme and the study for arc tube material, optimization of gas and so on are being proceeded to improve the property of the lamp. Especially, to control ceramic metal-halide lamp, the vigorous study and practical use with respect to Electronic Ballast, which has been improved in the disadvantages of the conventional Magnetic Ballast are made. In this paper, Electrical characteristics and gas insulation destroy time are analyzed by comparing magnetic ballast with electronic ballast.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권3호
• /
• pp.383-390
• /
• 2010

This study is currently giving priority to developing the ship's ballast water treatment system using ozone (Ozone BWTS). The Ozone BWTS was tested in a full scale land-based mobile barge to evaluate performance according to the IMO G8 Guidelines. Test cycles using the mobile-barge were conducted in seawater and brackish water in the vicinity of the Port of Busan and Nakdong River, Republic of Korea. All tests were conducted according to the requirements of the G8 Guidelines. Test results show that the Ozone BWTS meets the Ballast Water Performance Standard contained in Regulation D-2 of the IMO Ballast Water Management Convention, as well as all of the operational, safety, and environmental testing requirements of the G8 Guidelines, as required for type approval of IMO. The study results show that the Ozone BWTS is capable of meeting the Ballast Water Performance Standard under Regulation D-2 of the International Convention for the Control and Management of Ships’ Ballast Water and Sediments, and also the more stringent standards being proposed under US legislation.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.673-678
• /
• 2005

IMO adopted ' International Convention for The Control and Management of Ships' Ballast Water and Sediments ' on February 13th 2004. According to this convention, a ballast water treatment system should be installed in all ships obligatorily up to a standard date. When the system is installed, economic propriety should be considered. The economic propriety analysis examines the profit of a relevant project which can be presented by a equation, (Profit) = (income) - (expense) - (tax). However, the ballast water system is not for the profit during the life cycle but for the satisfaction of the regulation. Therefore, the expense should be minimum against the profit. This study presents the LCC(Life-Cycle Cost) analysis for economic evaluation of several ballast water system of foreign products.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1989-1994
• /
• 2009

This study purposes are improvement of system (lamp & ballast) efficacy with and optical characteristics through the developed ceramic arc tube. The designed electronic ballast is substituted for conventional magnetic ballast. These electric signal and optical, thermal characteristics through the improving efficacy of lighting system compared with conventional magnetic ballast. properties of lamp by driving method is researching in ballast. Particularly, electronic ballasts, which improved against weakness of Magnetic Ballast, are researching and applying to control of ceramic metal-halide lamp. but One major limitation is the acoustic resonance problem in CMH lamps at high-frequency operation. In order to avoid acoustic resonance, driving frequency decided 21[kHz]. Before discharge in this paper. The PSpice simulation result obtained sufficient voltage gain and the ignition voltage obtained over 3[kV] at 75[kHz]. After discharge, driving voltage obtained approximately 90[Vrms] at 21[kHz].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1623_1624
• /
• 2009

The use of arc tubes made of ceramic material further enhanced some of the metal halide lamp’s properties. These properties translate into higher efficacy with better color rendering, stable color through lamp long life. Recently, due to an increase in the application of the ceramic metal-halide lamp, the study for the property etc. according to Ballast's driving scheme and the study for arc tube material, optimization of gas and so on are being proceeded to improve the property of the lamp. Especially, to control ceramic metal-halide lamp, the vigorous study and practical use with respect to Electronic Ballast, which has been improved in the disadvantages of the conventional Magnetic Ballast are made. In this paper, Electrical characteristics and gas insulation destroy time are analyzed by comparing magnetic ballast with electronic ballast.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.13-16
• /
• 2000

This paper describes a design of the external-exciting electronic ballast for 100W high pressure sodium lamp. The ballast is consists of the full-bridge inverter and an external-exciting control circuit. L and C values of an equivalent L-C series resonant circuit are calculated analytically. The electrical output characteristics of the ballast, such as voltage, current etc., are simulated by Pspice. The experimental results from high pressure sodium lamp system with the ballast we developed are shown to be consistent with the simulated results.

• 대한전자공학회논문지TC
• /
• 제45권2호
• /
• pp.83-91
• /
• 2008

전력선 통신을 이용한 MH(메탈핼라이드) 램프용 조광제어시스템을 구성하기 위하여, 전력선 모뎀 및 MH 램프용 전자식 안정기를 설계하고, 안정기가 전력선 채널에 미치는 영향을 분석하였다. 전력선이 통신채널로써 사용될시 채널의 특성은 부하에 의하여 변화하게 되므로, 부하는 전력선 통신에 적합하도록 설계되어야 한다. 따라서 본 논문에서는 전력선 통신에 적합한 전자식 안정기를 제안하고, ASK와 FSK 두 종류의 전력선 모뎀을 설계하여 맨체스터 코드와 DS/SS 방식을 각각 적용하였다. 실험결과, DS/SS 방식이 적용된 FSK 전력선 모뎀이 가장 우수한 특성을 갖는 것으로 확인 되었다.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.44-52
• /
• 2007

본 논문에서는 저가형 마이크로 프로세서를 이용한 형광등용 안정기의 인버터 구동회로를 설계하였다. 인버터 안정기의 고속 절체 주파수에 따른 스위칭 손실 및 모멘트 저하를 방지하기 위하여 소프트 스타트 기법이 사용되었으며, 설계된 전자식 안정기는 PWM 제어를 통한 스위칭 펄스의 안정화를 통해 안정기의 안정도 향상 및 형광등의 조도특성 개선이 가능하였다.