• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.31-39
• /
• 1995

The surface integrity of a machined surface is an important factor that dictates several performance characteristics of a metal part. In this paper, the surface integrity aspects are presented specifically with respect to the tribological properties of steel. Test specimens were prepared under varying conditions to induce different levels of surface deformation and hardness. Sliding and rolling experiments were performed to assess the friction and wear characteristics of these specimens using a pinon-disk type tribotester and a plate-on-ball type set-up. It is reaffirmed that heat treated steels possess superior sliding and rolling fatigue resistance than raw steel. However, for the case of raw steels machined under varying conditions, the harder specimen resulted in higher wear. This result is attributed to the presence of surface cracks that were induced during machining. The results of such findings will aid in the optimization of surface preparation process for tribological applications of steel.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.272-273
• /
• 2015

DLC는 고경도, 화학적 안정성 및 고내식성, 내마모성 및 낮은 마찰계수로 인하여 여러 산업분야의 표면처리기술로 적용되고 있다. 하지만 DLC의 절연특성은 전기 산업 분야에 적용 한계가 있다. 이번 연구에서는 DLC를 연료전지 중 PEMFC(고체산화물 연료전지)의 금속 분리판 표면처리에 적용시키고자 하였으며, 높은 전도성과 고내식성의 Me-DLC박막 제작을 목표로 하였다. Cr을 Buffer layer로 하고 Cr과 DLC를 동시에 증착한 Cr-DLC 박막을 제작하였다. Cr-DLC코팅의 기계적 특성을 확인하기 위하여 나노인덴터를 이용하여 경도 및 탄성률을 측정하였으며, ball-on disk를 이용하여 마찰계수를 확인하였다. 각 샘플들의 전기전도성을 확인하기 위하여 4-point probe system을 이용하여 측정하였으며, 부식 저항 특성을 확인하기 위하여 1mole $H_2SO_4$ + 2 ppm HF 분위기의 전해질 내에서 동전위 분극시험을 통한 내식성 테스트를 하였으며, XPS를 통하여 Cr-DLC박막내의 구조적 특성을 확인하였다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.11
• /
• pp.632-636
• /
• 2000

Fuzzy controllers show good performance in case of the systems being nonlinear and difficult to solve. But these fuzzy controllers have problems which have to decide suitable rules and membership functions. In general, we decide those using the heuristic methods or the experience of experts. Recently, G.A. have been studied in this field. The number of rules increase exponentially when the number of input and output increase. It also makes hard to decide the rules and membership functions even though we use G.A. In this paper, we suggest parallel fuzzy controllers, and also the method to decrease the number of rules. The excellent performance of these methods is confirmed through simulations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.189-192
• /
• 2000

High-temperature superconductor of Bi-2212 system was fabricated by CFP(centrifugal forming process). To make a uniform specimen slurry was prepared in the ratio of 7:3(powder:binder) and ball milled for 24 hours. Milled slurry was charged into a rotating mold with 450 rpm and dried at room temperature. Then the specimen was performed binder burn-out at 35$0^{\circ}C$ and heated for partial melting to 86$0^{\circ}C$. XRD analysis of most specimens were shown 2212 phase and observed a local plate shaped microstructure with a well aligned c-axis direction from SEM images. T$_{c}$(Critical temperature) of Bi-2212 was 64K.K.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.784-789
• /
• 2000

Equations of motion are derived and solved using the finite element method substructure synthesis for the disk-spindle system with rigid spindle and flexible shaft. The disk is modeled as a flexible spinning disk by Kirchhoff plate theory and von Karman nonlinear strain. The spindle supporting the flexible disk is modeled as a rigid body to consider its complex geometry. The stationary shaft supporting the rotating disk-spindle-bearing system is modeled by Euler beam, and the ball bearings are modeled as the stiffness matrix with 5 degrees of freedom. Developed theory is applied to analyze the vibration characteristics of a 3.5" HDD and a 2.5" HDD, respectively, and modal tests are performed to verify the simulation results. This paper shows that the developed theory can be effectively applied to the rotating disk-spindle system with the spindle of complex shape.

• Computers and Concrete
• /
• v.24 no.5
• /
• pp.437-444
• /
• 2019

PLC and its expansion module, electric ball valve and cooling pipe, electric heating steel plate and various components of the system, which is used to control test and process data. By automatically adjusting the opening of the valve, the system makes the top temperature and cooling speed develop along the ideal temperature diachronic curve. Moreover, the system enables the temperature difference between inside and surface of test block limited in a given range by automatically controlling the surface board heating. The method of physical simulation test by sandbox with built-in cooling water pipe and heating rod is adopted. On the premise of a given standard value, the operation of the system is checked under different working conditions. Further, an extension of this system is proposed, which enables its application to obtain some thermal parameters when cooperating with numerical simulation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.77-78
• /
• 2002

A regression formula including the inlet film thickness as the parameter for the starvation factor in EHL condition is obtained by numerical analysis with Elord‘s cavitation algorithm. In addition, an apparatus for starved film thickness measurement by use of the white light interferometry is developed in order to verify the proposed regression formula. From observation results by this apparatus, the proposed regression formula can predict the reduction of central film thickness caused by starvation in a ball-plate contact with an uncertainty up to 10%

• Animal Systematics, Evolution and Diversity
• /
• v.39 no.4
• /
• pp.322-324
• /
• 2023

The hepialid species, Korscheltellus lupulina (Linnaeus) is newly recorded from Korea. A female specimen of K. lupulina was collected on Jeju Island, southern Korea. This species can be distinguished by the whitish linear marking on the postmedian and dorsum of the forewing but these markings are often unseen in females. The female genitalia can be diagnosed by the semi-rounded ninth abdominal tergum, a pair of semi-rounded ninth abdominal sternum with weakly produced, semi-rounded central plate-shaped medial region, a pair of narrow band-shaped subanal plates, the short, thin ductus bursae, and the large, ball-shaped corpus bursae without a signum. Currently, there are four genera and five species of the Hepialidae distributed in Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2290-2295
• /
• 2005

In this paper, it is developed simulator system of 3 D.O.F parallel robot for educate of expertness. This simulator system is composed of three parts ? 3 D.O.F parallel robot, controller (hardware) and software. First, basic structure of the robot is 3 active rotary actuator that small geared step motor with fixed base. An input-link is connected to this actuator, and this input-link can connect two ball joints. Thus, two couplers can be connected to the input-link as a pair. An end-plate, which is jointed by a ball joint, can be connected to the opposite side of the coupler. A sub-link is produced and installed to the internal spring, and then this sub-link is connected to the upper and bottom side of the coupler in order to prevent a certain bending or deformation of the two couplers. The robot has the maximum diameter of 230 mm, 10 kg of weight (include the table), and maximum height of 300 mm. Hardware for control of the robot is composed of computer, micro controller, pulse generator, and motor driver. The PC used in the controller sends commands to the controller, and transform signals input by the user to the coordinate value of the robot by substituting it into equations of kinematics and inverse kinematics. A controller transfer the coordinate value calculated in the PC to a pulse generator by transforming it into signals. A pulse generator analyzes commands, which include the information received from the micro controller. A motor driver transfer the pulse received from the pulse generator to a step motor, and protects against the over-load of the motor Finally, software is a learning purposed control program, which presents the principle of a robot operation and actual implementation. The benefit of this program is that easy for a novice to use. Developed robot simulator system can be practically applied to understand the principle of parallel mechanism, motors, sensor, and various other parts.

• Journal of Powder Materials
• /
• v.17 no.4
• /
• pp.302-311
• /
• 2010

In this research, the refinement behavior of the coarse magnesium powders fabricated by gas atomization was investigated as a function of milling time using a short duration high-energy ball milling equipment, which produces fine powders by means of an ultra high-energy within a short duration. The microstructure, hardness, and formability of the powders were investigated as a function of milling time using X-ray diffraction, scanning electron microscopy, Vickers micro-hardness tester and magnetic pulsed compaction. The particle morphology of Mg powders changed from spherical particles of feed metals to irregular oval particles, then platetype particles, with increasing milling time. Due to having HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, resulting in producing plate-type powders. With increasing milling time, the particle size increased until 5 minutes, then decreased gradually reaching a uniform size of about 50 micrometer after 20 minutes. The relative density of the initial power was 98% before milling, and mechanically milled powder was 92~94% with increase milling time (1~5 min) then it increased to 99% after milling for 20 minutes because of the change in particle shapes.