• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.353-356
• /
• 2004

This paper discribes the analysis of the I-V characteristics of 4H-SiC DiMOSFET with single epi-layer Silicon Carbide has been around for over a century. However, only in the past two to three decades has its semiconducting properties been sufficently studied and applied, especially for high-power and high frequency devices. We present a numerical simulation-based optimization of DiMOSFET using the general-purpose device simulator MINIMIS-NT. For simulation, a loin thick drift layer with doping concentration of $5{\times}10^{15}/cm^3$ was chosen for 1000V blocking voltage design. The simulation results were used to calculate Baliga's figure of Merit (BFOM) as the criterion structure optimization and comparison.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.728-735
• /
• 2022

이번 연구에서 우리는 낮은 온 저항을 위해 p-well 영역 아래에 도입된 전류 확산층을 변화시켜 고전압 4H-SiC 전력 Diffused MOSFET(DMOSFET)에 대해 연구했다. Current Spreading Layer(CSL)의 두께(T_CSL)를 0~0.9 um, CSL의 도핑 농도(N_CSL)를 1~5×10¹⁶ cm^-3으로 변화시키면서 소자의 전기적 특성을 분석하였다. TCAD 2D-simulation을 통해 최적화되었으며 CSL이 온 저항을 낮추는 것뿐만 아니라 항복전압도 낮춤으로써 CSL의 최적화의 중요성을 확인하였다. 최적화된 구조는 59.61 mΩ·cm²의 온저항, 5 kV의 항복전압, 0.43 GW/cm²의 Baliga's Figure of Merit(BFOM)을 보여주었다.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.181-183
• /
• 2016

탄화규소(Silicon Carbide) 기반의 1200 V급 Merged Pin Schottky(MPS) 다이오드의 구조를 2D-atlas simulation tool을 사용하여 최적화 및 설계하였다. 최적화된 항복전압과 온-저항 값을 얻기 위해 본 소자에서 중요한 파라미터인 P-Grid의 도핑농도와 에피층의 도핑농도를 각각 $2{\sim}10{\times}10^{17}cm^{-3}$, $2{\sim}10{\times}10^{16}cm^{-3}$으로 변화시키면서 소자의 전기적 특성을 분석하였으며, 그 후 P-Grid의 Space값을 $1{\sim}5{\mu}m$로 설계하여 이에 따른 항복전압과 온-저항의 값을 확인하였다. 항복전압과 온-저항은 서로 trade-off 관계에 있기 때문에 각 변수에서 도출된 값들을 Baliga's Figure Of Merit (BFOM)식에 대입하여 비교하였다. 그 결과 고전압 소자에 적용 가능한 1200 V급 4H-SiC MPS다이오드를 최적화 및 설계를 도출하였다.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.83-87
• /
• 2020

In this letter, we propose and analyze a new asymmetric structure that can be used for next-generation power semiconductor devices. We compare and analyze the electrical characteristics of the proposed device with respect to those of symmetric devices. The proposed device has a p-emitter on the right side of the cell. The peak electric field is reduced by the shielding effect caused by the p-emitter structure. Consequently, the breakdown voltage is increased. The proposed asymmetric structure has an approximately 100% higher Baliga's figure of merit (~94.22 MW/㎠) than the symmetric structure (~46.93 MW/㎠), and the breakdown voltage of the device increases by approximately 70%.

• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.298-302
• /
• 2023

In this paper, we discussed the effect of field plate dielectric materials such as silicon dioxide (SiO₂), aluminum oxide (Al₂O₃), and hafnium oxide (HfO₂) on the breakdown characteristics of β-Ga₂O₃ Schottky barrier diodes (SBDs). The breakdown voltage (BV) of the SBDs with a field plate was higher than that of SBDs without a field plate. The higher dielectric constant of HfO₂ contributed to the superior reduction in electric field concentration at the Schottky junction edge from 5.4 to 2.4 MV/cm. The SBDs with HfO₂ field plate showed the highest BV of 720 V, and constant specific on-resistance (R_on,sp) of 5.6 mΩ·cm², resulting in the highest Baliga's figure-of-merit (BFOM) of 92.0 MW/cm². We also investigated the effect of dielectric thickness and field plate length on BV.