• 한국전자파학회논문지
• /
• 제24권2호
• /
• pp.189-197
• /
• 2013

전자 통신 기술의 발전 추세에 따라 유비쿼터스 환경이 구축되면서 일상 생활에서 전자 기기의 밀집도는 폭발적으로 증가하는 추세를 보이고 있다. 이러한 다양한 전자 기기들이 ICT 건물 등의 사회 기반 시설에 설치될 시 이들 사이의 전자파 적합성 및 간섭 분석과 파악을 위해서는 효율적이고도 빠른 대형 구조물의 전자파 해석기법이 필수적이다. 이에 본 논문에서는 이러한 전자파 해석을 위하여 확률론적 기반의 PWB(Power Balance Method) 해석 방법을 소개하고 그 유용성을 고찰한다. 기존의 맥스웰 방정식에 입각한 결정론적 해석 결과와의 관계를 제시하기 위해 손실이 존재하는 2차원 직각 캐비티(cavity)에서 시뮬레이션을 수행하여, PWB 방법의 기저에 깔린 가정 및 통계적인 결과가 하나의 결정론적 문제에서 필드 분포의 부피 평균(volume average)에 해당함을 보였다. 복잡한 대형 구조물에서 full-wave 전자파 해석이 계산 비용과 시간적인 측면에서 큰 한계점이 있음은 이미 자명한 사실이므로, 통계적인 개념에 기반을 둔 본 PWB 해석 방법이 대형 구조물의 전자파 해석에 있어서 충분히 현실적인 대안이 될 것이다.

• 항공우주기술
• /
• 제9권2호
• /
• pp.176-184
• /
• 2010

지구 저궤도 위성의 임무 운용 시 전력 시스템을 안전하고 운용하고 에너지 균형을 만족하는 임무를 설계하기 위해 계획된 임무에 대한 전력 파라미터를 예측해야 한다. 이 논문에서는 다양한 미션 프로파일에 대해 위성의 생성 전력, 소모 전력, 배터리 방전 정도(Depth of Discharge, 이하 DoD), 버스 전압, 충/방전 전류 등을 예측함으로써 미션의 유효성 및 에너지 균형을 검증하기 위한 전력 시뮬레이터를 제안한다. 제안된 전력 시뮬레이터에는 인공위성의 생성 전력을 모사하기 위해 태양전지판(Solar Array, 이하 SA)의 모델, SAR (Solar Array Regulator)의 3가지 동작 모드를 구현하였다. 또한 소모 전력을 모사하기 위해 버스 및 탑재체의 각 유닛 별 소모 전력, Unit on/off configuration, 탑재체 운용 모드 등을 고려하였다. 버스 전압 및 충/방전 전류를 예측하기 위해 배터리 및 주변 회로를 모델링하고 임의의 DoD, 충방전 전류에 대해 배터리 전압 및 버스 전압을 예측한다. 구현된 전력 시뮬레이터를 이용해 에너지 균형을 분석하고 임무 계획의 적합성을 쉽게 판단할 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.189-192
• /
• 2003

Electrical power in satellite system should persistently satisfy specified power requirement even though that happen the failure of solar array string or battery cell during the mission operation. In this study, the solar array and battery of GEO Communication Satellite with 3kW capacity are designed, and energy balance analysis according to power operation mode are performed to meet specified power capacity at the transfer orbit

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.296-306
• /
• 2019

The flyback topology is being widely used in power adapters. The coupling capacitance between primary and secondary windings of a flyback transformer is the main path for common-mode (CM) noise conduction. A Y-cap is usually used to effectively suppress EMI noise. However, this results in problems in space, cost, and the danger of safety leakage current. In this paper, the CM noise behaviors due to the electric field coupling of the transformer windings in a flyback adapter with synchronous rectification are analyzed. Then a scheme with balance winding is proposed to reduce the CM noise with a transformer winding design that eliminates the Y-cap. The planar transformer has advantages in terms of its low profile, good heat dissipation and good stray parameter consistency. Based on the proposed scheme, with the help of a full-wave simulation tool, the key parameter influences of the transformer PCB winding design on CM noise are further analyzed. Finally, a PCB transformer for an 18W adapter is designed and tested to verify the effectiveness of the balance winding scheme.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.811-818
• /
• 2011

Modulation strategies for multilevel inverters have typically focused on synthesizing a desired set of sinusoidal voltage waveforms using a fixed number of dc voltage sources. This makes the average power drawn from different dc voltage sources unequal and time varying. Therefore, the dc voltage sources are unregulated and require that corrective control action be incorporated. In this paper, first two new selections are proposed for determining the dc voltage sources values for asymmetric cascaded multilevel inverters. Then two modulation strategies are proposed for the dc power balancing of these types of multilevel inverters. Using the charge balance control methods, the power drawn from all of the dc sources are balanced except for the dc source used in the first H-bridge. The proposed control methods are validated by simulation and experimental results on a single-phase 21-level inverter.

• 전자공학회논문지
• /
• 제50권5호
• /
• pp.121-127
• /
• 2013

작은 입력신호의 spectral-amplitude-code(SAC) optical code-division multiple-access (OCDMA) 시스템에는 nonideal symmetric balance incomplete block design(BIBD) code의 사용이 효율적이나 충분한 사용자를 수용하지 못하는 단점이 있다. 이를 극복하기 위하여 본 논문에서는 ideal BIBD code를 공간 코드로 사용하고 nonideal code를 파장 코드로 사용하는 two-dimensional(2-D) BIBD code를 제안한다. 사용자 수에 따른 bit error-rate(BER) 분석을 통하여 제안하는 2-D BIBD code가 1-D BIBD code에 비하여 최대사용자 수를 현저하게 증가시킬 수 있음을 알 수 있다.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.120-127
• /
• 2011

Solar array has the following nonlinear characteristic, such as whose output current increases, output voltage is reduced. For this reason, boost converter with solar array system is always controlled to remain on the maximum power point of the solar array. In this case, we are not focused on the output of the solar array and not consider efficiency of the boost converter, which is assumed reliable. But efficiency of the converter also should be considered, which affects the total efficiency of the overall solar energy system. In this paper, efficiency calculation of the boost converter using power balance method is proposed, which will be used for a powerful reference before hardware realization.

• 한국전문물리치료학회지
• /
• 제14권1호
• /
• pp.11-20
• /
• 2007

The objective of this study was to discern the effects of a balance training program on the performance of lower extremities in order to improve strength (muscle power, flexibility, walking power), balance control and walking ability in the elderly. The subjects selected were aged 65 years and over, with no known relevant medical history that may disturb their balance, and have also been visiting the Gimhae Senior Welfare Center. The variable group consisted of 30 subjects, of whom were people who had been participating in balance training programs (One Leg Standing; OLS, Functional Reach; FR, Timed Get Up and Go; TUG) as an intervention for 8 weeks 3 times per a week. They were examined in order to identify their balance control before and after. The control group consisted of thirty subjects who preferred to exercise without any intervention relating to balance training program. The subjects were measured before and after balance training in order to determine the effectiveness of exercise and the effectiveness of exercise combined with the aid of a Balance Performance Monitor. 1. Mean time on OLS test with left and right sided extremities in the experimental group was 35.44 sec, 42.10 sec longer than control group respectively. In FR tests applied to the left and right side, mean reaching distance was increased up to 5.56 cm, 6.73 cm in experimental group respectively. Mean time on TUG test from a chair in experimental group was decreased to 2.33 sec. 2. Mean value of decline in the level balance control, both left and right side, decreased to 2.24% as examined by the Balance Performance Monitor. Mean scores for sway level after balance training decrease to .98% and for balance control both anterior and posterior directions decreased to mean 1.07% and 1.44%, respectively.

• Journal of Power Electronics
• /
• 제3권1호
• /
• pp.40-48
• /
• 2003

In this paper, a hybrid power system with photovoltaic/wind/diesel generators is proposed to solve the defect of stand-alone type power system in a remote area. A hybrid power system has a power-balanced controller to equilibrate generation power with a given load demand and which is composed of common DC power system. To execute a power-balanced control, a hybrid power system is assumed that all of power generators have the characteristics of an equivalent current-source and load sharing control technique must be needed at the same time. So this paper discusses the structure of power-balance control for hybrid power system. And through the results of simulation, the proposed scheme was verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.422-425
• /
• 2002

Position balance control refers to ability that is kept bodily center of gravity under minimum position shake on surface of land. Patients who an injury of brain, a wound of the central nervous system or weakening of leg muscular power is fallen are trend increasing steadily by the car accident body balance function is on an increasing trended. These patients have difficulty in position balance control, receive big restriction walk and life style. This research composed to do body balance function rehabilitation training which elevate leg muscular power using step machine. And expect to become effective rehabilitation training device because measuring bodily pressure center using Force Platform and do so that can confirm training result easily as that is monitor.