• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.248-251
• /
• 2008

The objective of this study is to select fuel/air feeders for reliable operation of BOP(Balance of Plant) system for a DMFC (direct methanol fuel cell). A 42-cell 50W DMFC stack is considered for performance comparison of selected fuel pumps and air blowers. The present stack has two serpentine anode channels with depth of 1.2 mm and rib of 1 mm and one serpentine cathode channel with depth of 1.5 mm and rib of 1 mm. The pressure drop through the stack is estimated in advance by utilizing the pre-existing loss coefficients data for various flow configurations. Then the operating points of feeders are determined at the balance point of the flow impedance curves for the channels in the DMFC stack and the selected pump and blower performance curves. After estimating the operating flow rates in the anode and cathode channels, the flow measurement with the selected feeders is performed for the comparison with the estimated flow rates. The measured results show that the discrepancy between the estimation and the measurement for the cathode is about 26%, about 3% for the anode

• 대한한방내과학회지
• /
• 제38권5호
• /
• pp.709-718
• /
• 2017

Objective: This study is a report on a case of cerebellar infarction with vertebrobasilar artery dissection which was improved by Korean medicine. Methods: A 63-year-old man diagnosed with cerebellar infarction with vertebrobasilar artery dissection was admitted to hospital for 86 days and treated with Korean medicine (acupuncture and herbal medicine) and rehabilitation treatment. Clinical symptoms were assessed with a Modified Barthel index, functional independent measurement, Berg balance scale, manual muscle test, and a visual analogue scale. Result: After treatment, the clinical symptoms were improved, and the evaluation index scores (modified Barthel index, functional independent measurement, Berg balance scale) increased. Conclusion: Korean medicine may be a meaningful treatment for patients with cerebellar infarction with vertebrobasilar artery dissection.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.264-269
• /
• 2011

To increase therapeutic efficiency and biological safety, it is important to precision control of acoustic output for therapeutic ultrasound equipment. In this paper, the electro-acoustic radiation conductance, one of electroacoustic characteristics of therapeutic ultrasound equipment, was measured by the radiation force balance method according to IEC 61161 standards and the acoustic output was estimated using the electro-acoustic radiation conductance. The estimation of acoustic output was conducted to continuous wave mode and pulse wave mode of duty cycle between 20% and 80%. The differences between prediction values and measurement results are within 5% of measurement uncertainty, which is a reasonably good agreement. The results show that acoustic output controlled by electro-acoustic radiation conductance was found to be an effective method.

• 대한물리치료과학회지
• /
• 제18권1호
• /
• pp.51-60
• /
• 2011

Purpose: The purpose of this study was to investigate hamstring length during static uprighting position using weight distribution ratio. Methods: Ninety-six volunteers(56 males) were participated. The active knee extension test(AKE) was measured 3 times on both legs. The mean score of AKE was obtained. Then, the measurement of weight distribution ratio was observed 3 times on both legs, and its mean value was also calculated. Subjects were divided four groups based on their hamstring length measurement; both hamstring shortening group, left hamstring shortening group, right hamstring shortening group and normal hamstring length group. One-way ANOVA was employed to analyse collected data. Pearson's correlation was also hired to see any relationship between the hamstring length and the weight distribution. Results: In anterior/left area and posterior/right area, both hamstring shortening group left hamstring shortening group were superior to right hamstring shortening group and normal hamstring length group. Significant difference was existed statistically(p<.05) between groups. The correlation analysis between hamstring length and weight distribution ratio has not been shown any significant findings(Pant/post=0.733, Plt/rt=0.135). Conclusion: The results of the study may be applied to therapeutic management in posture and movement skill in musculoskeletal physical therapy.

• Journal of Information Processing Systems
• /
• 제15권2호
• /
• pp.331-343
• /
• 2019

Dynamic thermal rating of the overhead transmission lines is affected by many uncertain factors. The ambient temperature, wind speed and wind direction are the main sources of uncertainty. Measurement uncertainty is an important parameter to evaluate the reliability of measurement results. This paper presents the uncertainty analysis based on Monte Carlo. On the basis of establishing the mathematical model and setting the probability density function of the input parameter value, the probability density function of the output value is determined by probability distribution random sampling. Through the calculation and analysis of the transient thermal balance equation and the steady- state thermal balance equation, the steady-state current carrying capacity, the transient current carrying capacity, the standard uncertainty and the probability distribution of the minimum and maximum values of the conductor under 95% confidence interval are obtained. The simulation results indicate that Monte Carlo method can decrease the computational complexity, speed up the calculation, and increase the validity and reliability of the uncertainty evaluation.

• 대한한방소아과학회지
• /
• 제38권2호
• /
• pp.32-40
• /
• 2024

Objectives The main aim was to quantify forward head posture using POM Checker®, a postural balance analyzer, among elementary school students. Additionally, the study aimed to investigate whether postural imbalance improved following three sessions of the school doctor program focused on body posture correction. Methods The program was conducted as part of the school doctor program in Korean Medicine, featuring lectures by a designated Korean Medicine doctor at an elementary school. The curriculum covered the importance of maintaining correct posture and included posture correction exercises. Pre- and post-program self-reported surveys were administered, alongside postural measurements taken over three months at one-month intervals. The survey included data on gender, grade, lifestyle habits, and awareness of correct posture. Result Out of 73 participating students, 63 underwent body balance measurements from the upper grades of one elementary school. Survey results revealed significant variations in daily sitting hours and weekly exercise levels. Attendance at lectures increased knowledge about correct posture. Initial measurements of forward head posture categorized 41.0% and 1.6% of participants into caution and risk groups, respectively. After the second measurement, the caution group representation decreased to 3.2%, and by the third measurement, only 1.6% of participants remained in the caution group. Conclusions Improvements in the angle and understanding of forward head posture among elementary school students were observed before and after the Korean Medicine school doctor program. However, posture improvement may be temporary, necessitating consistent follow-up management and monitoring.

• 한국유체기계학회 논문집
• /
• 제2권2호
• /
• pp.19-26
• /
• 1999

Thermal output in a nuclear power plant is verified with calorimetric heat balance on the secondary plant. The calorimetry involves the precise measurement of the feedwater flow rate. However, the correct indication of feedwater flow rate obtained by a pressure-difference measurement across a venturi can be affected by instrument errors, fouling or a poorly developed velocity profile. This can result in an inaccurate mass flow rate and consequently an inaccurate estimate of power. The purpose of this study is to develop verification methods with accuracy better than $0.5\%$ for high precision flow measurement to be used for measuring feedwater flow rate. This chemical tracer method is a testing process that uses tracers which can be applied to quantify losses in electrical output due to the incorrect measurements of feedwater flow rate. And this system has good response to the variation of the flow rate. Accuracy of better than 0.5 percent can be expected for feedwater flow measurement, providing that the system can be stabilized during the test. This methodology is applicable to other flow systems well.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권1_2호
• /
• pp.54-64
• /
• 1992

The balance of facial sop tissue is important factor for the treatment of maxillofacial deformity patients. There are many cephalometric analysis of facial bone but a few soft tissue analysis of face for the orthognathic surgery, especially in the oriental people. This study aimed at examining the mean value of the soft tissue measurement of 120 Korean adult women with the linear and angular measurement and comparing with Caucasian. The results ere as follows. 1. In the frontal linear measurement, Korean women have larger interocular distant and width of nose, but the width of mouth appeared less than Caucasian. 2. In the frontal angular measurement, Korean women have larger inclination of the eye than Caucasian. 3. In the lateral linear measurement, Korean women have more prominent upper and lower lip position than Caucasian and have longer upper facial height comparing with lower facial height than Caucasian. 4. In the lateral angular measurement, Korean women have more convex facial profile and less nasolabial and geniolabial angle. 5. In the lateral facial ratio, Korean women have larger proportion in the lower department below the stomion.

• 한국정보통신학회논문지
• /
• 제12권10호
• /
• pp.1717-1722
• /
• 2008

스트레스 정도를 측정하기 위한 다양한 도구들이 많이 사용되고 있다. 스트레스 측정에는 심리측정과 생체측정이 있다. 어느 한쪽만을 고려하였을 경우 주관적이거나 객관적 결여가 발생한다. 그 문제점을 보완하기 위해 두 측정을 혼합한 새로운 스트레스 지수가 필요하다. 개인적 특성에 따라 측정 결과도 다양하게 나타나지만, 현재 사용되고 있는 측정도구를 바탕으로 한 일반적인 경우를 고려하여 연구하였다. 심리와 생체 측정 도구를 통해서 얻어지는 지수를 이용하여 통합적인 스트레스 지수를 얻는다. 그래서 임의로 4가지의 스트레스 측정도구를 사용한다. 각 측정도구에서 나온 결과에 대한 멀티지수가 나타나는데, 그 지수들을 각각 좌표평면에 나타내어 스트레스에 대한 균형성과 편향성을 분석하고 진단한다.

• 에너지공학
• /
• 제23권4호
• /
• pp.9-18
• /
• 2014

시험방법 중 현재 국내 자동차 연비계산 방법은 차대동력계에 시험차량을 설치한 후, 주어진 시험모드(FTP-75 & HWFET 모드 등)에 따라 차량을 주행하여 측정되어지는 배출가스 결과를 가지고 계산에 의해 연비를 구하는 방식인 카본발란스 측정법(Carbon balance method)을 이용하고 있다. 이때 사용하고 있는 카본발란스 측정법은 시험방법 개발 당시의 표준연료에 대해 연료물성을 구하고, 이때 구하여진 상수 값과 시험에서 측정되어진 THC, CO, $CO_2$ 값을 가지고 계산하게 된다. 그러므로 시험할 때마다 매번 바뀌게 되는 사용 연료의 연료물성 특성은 정확히 고려되지 않게 된다. 주어진 시험연료에 따라 엔진성능 및 배출가스 결과가 변하게 되고, 많은 대체연료가 나오고 있는 현 시점에서 시험연료의 물성 특성을 연비계산 시에도 고려해야만 된다고 생각된다. 본 연구에서는 기존에 사용하고 있는 카본발란스법과 실제 시험에 사용된 연료의 유량을 측정하는 유량측정 방법을 이용한 결과를 비교하여, 시험에 사용된 연료의 물성 특성을 고려할 수 있는 방법을 연구함으로서, 다양해지고 있는 연료의 물성 특성을 고려해 줄 수 있는 개선된 연비측정 방법을 검토해 보고자 한다.