• Atmosphere
• /
• v.26 no.3
• /
• pp.483-492
• /
• 2016

We have examined the random error of eddy covariance (EC) measurements on the basis of two-tower approach during daytime. Two EC towers were placed on the grassland with different vegetation density near Gumi-weir. We calculated the random error using three different methods. The first method (M1) is two-tower method suggested by Hollinger and Richardson (2005) where random error is based on differences between simultaneous flux measurements from two towers in very similar environmental conditions. The second one (M2) is suggested by Kessomkiat et al. (2013), which is extended procedure to estimate random error of EC data for two towers in more heterogeneous environmental conditions. They removed systematic flux difference due to the energy balance deficit and evaporative fraction difference between two sites before determining the random error of fluxes using M1 method. Here, we introduce the third method (M3) where we additionally removed systematic flux difference due to available energy difference between two sites. Compared to M1 and M2 methods, application of M3 method results in more symmetric random error distribution. The magnitude of estimated random error is smallest when using M3 method because application of M3 method results in the least systematic flux difference between two sites among three methods. An empirical formula of random error is developed as a function of flux magnitude, wind speed and measurement height for use in single tower sites near Nakdong River. This study suggests that correcting available energy difference between two sites is also required for calculating the random error of EC data from two towers at heterogeneous site where vegetation density is low.

• Atmosphere
• /
• v.33 no.1
• /
• pp.33-47
• /
• 2023

In this study, for the application of observation errors to the Korean Integrated Model (KIM) to utilize the Constellation Observing System for Meteorology, Ionosphere & Climate-2 (COSMIC-2) new satellites, the observation errors were diagnosed based on the Desroziers method using the cost function in the process of variational data assimilation. We calculated observation errors for all observational species being utilized for KIM and compared with their relative values. The observation error of the calculated the Global Navigation Satellite System Radio Occultation (GNSS RO) was about six times smaller than that of other satellites. In order to balance with other satellites, we conducted two experiments in which the GNSS RO data expanded by about twice the observation error. The performance of the analysis field was significantly improved in the tropics, where the COSMIC-2 data are more available, and in the Southern Hemisphere, where the influence of GNSS RO data is significantly greater. In particular, the prediction performance of the Southern Hemisphere was improved by doubling the observation error in global region, rather than doubling the COSMIC-2 data only in areas with high density, which seems to have been balanced with other observations.

• Physical Therapy Korea
• /
• v.22 no.3
• /
• pp.33-40
• /
• 2015

The purpose of this study was to investigate the effect of multi joint-joint position sense (MJ-JPS) training on joint position sense, balance, and gait ability in stroke patients. A total of 18 stroke patients participated in the study. The subjects were allocated randomly into two groups: an experimental group and a control group. Participants in the experimental group received MJ-JPS training (10 min) and conventional treatment (20 min), but participants in the control group only received conventional treatment (30 min). Both groups received training for five times per week for six weeks. MJ-JPS is a training method used to increase proprioception in the lower extremities; as such, it is used, to position the lower extremities in a given space. MJ-JPS measurement was captured via video using a Image J program to calculate the error distance. Balance ability was measured using Timed Up and Go (TUG) and the Berg Balance Scale (BBS). Gait ability was measured with a 10 m walking test (10MWT) and by climbing four flights of stairs. The Shapiro-Wilk test was used to assess normalization. Within-group differences were analyzed using the paired t-test. Between-group differences were analyzed using the independent t-test. The experimental group showed a significant decrease in error distance (MJ-JPS) compared to the control group (p<.05). Both groups showed a significant difference in their BBS and 10MWT results (p<.05). The experimental group showed a significant decrease in their TUG and climbing results (p<.05), but the control group results for those two tasks were not found to be significant (p>.05). There was significant difference in MJ-JPS and by climbing four flights of stairs on variation of pre and post test in between groups (p<.05), but TUG and BBS and 10MWT was no significantly (p>.05). We suggest that the MJ-JPS training proposed in this study be used as an intervention to help improve the functional activity of the lower extremities in stroke patients.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.175-185
• /
• 1998

In this paper, we studied some design methodologies of typical FIR filters based on the peak-error constrained least square criterion which was first introducedd by Adams in 1991. This method is a mixed type of the classical least squared error method(LSM) and the so-called min-max error method (MMM). And by considering both the least squared error as well as the maximum error, the solution, i.e. the impulse response of the filter, can be found only when the restrictions on maximum gain, transition bandwidth, and the squared error are satisfied simultaneously under some trade-off conditions. We used the multiple exchange algorithms for optimization procedure and applied the design methodology to the cases of the multiband filter, the differentiator, and the Hilbert transformer by taking the balance of two design criteria into account. The results show that the peak-error constrained least weighted square error design method(PLEM) is superior in performance to the existing LSM and MMM from both the squared error and the maximum error standpoints. And it is verified that PLEM can be applied to not only the case of simple low pass filter, but also to various types of FIR filters.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1495-1504
• /
• 2013

Renewable energy integration and increased system complexities make system operator maintain supply and demand balance harder than before. To keep the grid frequency in a stable range, an appropriate spinning reserve margin should be procured with consideration of ever-changing system situation, such as demand, wind power output and generator failure. This paper propose a novel concept of dynamic reserve, which arrange different spinning reserve margin depending on time. To investigate the effectiveness of the proposed dynamic reserve, we developed a new short-term reliability criterion that estimates the probability of a spinning reserve shortage events, thus indicating grid frequency stability. Uncertainties of demand forecast error, wind generation forecast error and generator failure have been modeled in probabilistic terms, and the proposed spinning reserve has been applied to generation scheduling. This approach has been tested on the modified IEEE 118-bus system with a wind farm. The results show that the required spinning reserve margin changes depending on the system situation of demand, wind generation and generator failure. Moreover the proposed approach could be utilized even in case of system configuration change, such as wind generation extension.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.16 no.1
• /
• pp.9-18
• /
• 2012

Objectives The aim of this study is to propose an optimized tongue colour interpolation method to achieve accurate tongue image rendering. Methods We selected 60 colour chips in the chips of DIC color guide selector, and then divided randomly the colour chips into two groups. The colour chips of a group (Gr I) were used for finding the optimized colour correction factor of error and those of the other group (Gr II) were used for verifying the correction factor. We measured colour value of the Gr I colour chips with spectrophotometer, and took the colour chips image with a digital tongue image system (DTIS). We adjusted colour correction factor of error to equal the chip colour from each method. Through that process, we obtained the optimized colour correction factor. To verify the correction factor, we measured colour value of the Gr II colour chips with a spectrophotometer, and took the colour chips image with the DTIS in the two types of colour interpolation mode (auto white balance mode and optimized colour correction factor mode). And then we calculated the CIE-$L^*ab$ colour difference (${\Delta}E$) between colour values measured with the spectrophotometer and those from images taken with the DTIS. Results In auto white balance mode, The mean ${\Delta}E$ between colour values measured with the spectrophotometer and those from images taken with the DTIS was 13.95. On the other hand, in optimized colour correction factor mode, The mean ${\Delta}E$ was 9.55. The correction rate was over 30%. Conclusions In case of interpolating colour of images taken with the DTIS, we suggest that procedure to search the optimized colour correction factor of error should be done first.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.4
• /
• pp.85-92
• /
• 2016

PURPOSE: A good, valid, and feasible tool for evaluating sit to stand (STS) is needed to help clinicians quantify the STS ability of stroke patients and people with balance disorders. The purpose of this study was to evaluate the concurrent validity of the Nintendo Wii Balance Board (WBB) and a force plate during STS and gait. METHODS: Seventeen healthy adults performed five trials of STS and gait on the WBB placed on the force plate. The force plate and the WBB were compared in regard to center of pressure (COP) and ground reaction force (GRF) data that were collected simultaneously. The variables used for analysis were time (s), integral summation (%), COP path length (mm), COP x range, and COP y range, all of which were measured for both tasks. Counter (%), peak (%), and rebound (%) were analyzed for STS, and $1^{st}$ peak (%), min peak (%), and 2nd peak (%) were analyzed for gait. The concurrent validity was analyzed using an intraclass correlation coefficient (ICC) and a standard error of measurement (SEM) with a 95% confidence interval. RESULTS: The concurrent validity of the WBB for STS ranged from fair to good (ICC=.701~.994, SEM=.029~3.815). The concurrent validity for gait was good (ICC=.869 ~.989, SEM=.007~2.052) aside from path length and x and y ranges of COP (ICC=-.150~.371, SEM=3.635~4.142). CONCLUSION: The GRF of the WBB has a good validity for STS and gait analysis. The WBB is remarkably portable, easy to use, and convenient for clinically assessing STS and gait.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.3
• /
• pp.19-27
• /
• 2015

PURPOSE: This study aimed to investigate the effects of pressure sense perception training (PSPT) on various surfaces on the somatosensory system, balance, and walking ability in chronic stroke patients. METHODS: Thirty patients with stroke participated in this study and were randomly assigned to one of three groups; group 1 received the general physical therapy and the PSPT on a stable surface, group 2 received the general physical therapy and the PSPT on an unstable surface, and group 3 received the general physical therapy alone. Participants in group 1 and group 2 underwent 30 min/session, 3 days per week, for 4 weeks. Pressure error (PE) was used to evaluate changes of proprioception. The Balancia, Functional reach test (FRT), and Timed Up and Go (TUG) were used to assess the balance ability, and the 10m Walking Test (10-MWT) was used to assess walking ability. RESULTS: Experimental groups (group 1 and group 2) showed significant differences in PE, FRT, TUG, and 10-MWT compared to the control group (p <0.05). Group 2 (PSPT on an unstable surface) was significantly different in PE, FRT, and 10-MWT from group 1 (p <0.05). No significant differences were observed for other measures. CONCLUSION: Pressure sense perception training on an unstable surface might be a significantly more effective method for improving somatosensory function, balance, and walking ability, than PSPT on a stable surface.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.102-108
• /
• 2008

At the University of Maine, a hemicellulose pre-extraction technology is now being investigated to improve pulp yields, reduce the organic and inorganic load for liquor recovery, and create a feed stream for the generation of new biomaterials. It is important to understand the composition of unextracted wood, extracted wood, and pulping extracts in the design of an economically viable pilot-scale ethanol plant. For analysis of wood pulp composition, the total analytical mass balance closure was 100.6, 100.3, and 81.6% for unextracted chips, extracted chips, and pulping extracts from HPLC-H column analysis. Meanwhile, the total analytical mass balance from the HPLC-P column was 97.8, 86.3, and 80.7%, respectively. This slight variability between H- and P-column results for analytical mass balance may be within the experimental error of the measurement. The data generated by this analysis are important to further design work in commercializing this process.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.7
• /
• pp.35-44
• /
• 2004

In this study, a ventilation model was developed to determine a ventilation rate for the balance of heat, moisture and $CO_{2}$ in a mushroom house. Internal and external temperature, relative humidity and $CO_{2}$ concentration were measured and used to validate the ventilation model. The effects of various environmental factors on physiological responses of mushroom were also investigated. The verified model was simulated under the observed ventilation rates with a difference of$ 0.001{\~}0.065\;m^{3}{\cdot}S^{-1}$ (relative error of $0.3{\~}18.9\%$) when external temperature varied 22.5 to $24.8^{circ}C$ and average ventilation rates was $0.35m^{3}{\cdot}S^{-1}$. The optimal conditions for mushroom growth (internal temperature $22 ^{circ}C$, relative humidity $80\%$, $CO_{2}$ concentration 1,000 ppm) were used for the model application with external temperature, relative humidity and $CO_{2}$ concentration of $27.5{\~}33.5^{circ}C$, $60\%$, and 355 ppm, respectively. Thermal balance was a important factor for an optimum ventilation up to the external temperature of $32^{circ}C$, while $CO_{2}$ concentration balance was more important over $32^{circ}C$. This suggests that humidification for moisture balance is required to maintain temperature and $CO_{2}$ concentration at an optimal level by ventilation in a mushroom house.