Mass Balance on the Pulping Extracts of Maple Hardwood using High Performance Liquid Chromatography

HPLC 분석기를 이용한 펄프용 단풍나무의 펄핑 추출액에 관한 물질수지

  • Um, Byung-Hwan (Forest Bioproducts Research Initiative, Department of Chemical and Biological Engineering, University of Maine)
  • 엄병환 (메인 주립대 공과대학, 화학공학과)
  • Received : 2008.04.14
  • Accepted : 2008.05.02
  • Published : 2008.07.25

Abstract

At the University of Maine, a hemicellulose pre-extraction technology is now being investigated to improve pulp yields, reduce the organic and inorganic load for liquor recovery, and create a feed stream for the generation of new biomaterials. It is important to understand the composition of unextracted wood, extracted wood, and pulping extracts in the design of an economically viable pilot-scale ethanol plant. For analysis of wood pulp composition, the total analytical mass balance closure was 100.6, 100.3, and 81.6% for unextracted chips, extracted chips, and pulping extracts from HPLC-H column analysis. Meanwhile, the total analytical mass balance from the HPLC-P column was 97.8, 86.3, and 80.7%, respectively. This slight variability between H- and P-column results for analytical mass balance may be within the experimental error of the measurement. The data generated by this analysis are important to further design work in commercializing this process.

현재 메인 주립대학에서는 펄프용 목재 성분 중 헤미셀룰로오스 추출 기술에 관한 연구개발이 한창 진행 중이다. 펄프의 수율 향상과 용액 회수에 필요한 유기 및 무기물 사용을 줄이고 새로운 바이오 물질 생산에 필요한 도입부 추가 공정이 연구의 핵심이다. 바이오 물질 중 경제적으로 상용 가능한 에탄올 생산(pilot-scale)에 있어 전 처리되지 않은 기질, 전 처리된 기질 및 펄핑 선 추출액의 화학적 성분분석은 아주 중요한 공정이다. HPLC (High Performance Liquid Chromatography)를 이용한 펄프목재 성분분석 결과, H-column으로 분석한 총 물질수지(total analytical mass balance)는 전 처리되지 않은 칩의 경우 100.6%, 전 처리된 목재 칩은 100.3%, 그리고 펄핑 선 추출액은 81.6%의 결과를 보였다. 한편, P-column으로 분석한 결과, 전 처리되지 않은 기질, 전 처리된 기질, 그리고 선 추출액은 각각, 97.8%, 97.4%, 그리고 80.7%로 나타났다. 총 물질수지가 100%를 넘거나 부족한 수치는 분석해석 중 발생한 약간의 오류로 보인다. 펄프-바이오리파이너리(Biorefinery) 공정을 통해 생성된 기질(substrate) 각각의 정확한 성분분석 결과는 에탄올 상용화 공정에 필요한 중요한 자료가 될 것으로 기대한다.

Keywords

References

  1. Bailey, J. E. and D. F. Ollis, 1986. Biochemical Engineering Fundamentals, second ed., McGraw-Hill: New York.
  2. Capanema, E. A., M. Y. Balakshin, and C. L. Chen, 2004. An improved procedure for isolation of residual lignins from hardwood kraft pulps. Holzforschung. 58, 464-472. https://doi.org/10.1515/HF.2004.070
  3. Fan, L. T., M. M. Gharpuray, and Y. H. Lee, 1987. Cellulose Hydrolysis. Springer-Verlag, Berlin.
  4. Goering, H. K. and P. J. Van Soest, 1970. Forage fiber analyses (Apparatus, Reagents, Procedures, and Some Applications). Agriculture Handbook No. 379, Agriculture Research Service, USDA, 387-598.
  5. NREL Chemical Analysis and Testing Standard Procedure Series, 1994.
  6. Ranatunga, T. D., J. Jervis, R. F. Helm, J. D. McMillan, and R. J. Wooley, 2000. The effect of overliming on the toxicity of dilute acid pretreated lignocellulosics: the role of inorganics, uronic acids and ether-soluble organics. Enzyme and Microbial Technology. 27, 240-247. https://doi.org/10.1016/S0141-0229(00)00216-7