• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.550-556
• /
• 2000

Three floating islands were constructed on the surface of the reservoir, each consisting of 10 16-㎡ (4${\times}$4 m) segments, made of wood frames and floats. Three species of aquatic macrophytes were planted in each island on June, 1998. Phragmites australis was considered as the suitable aquatic macrophyte for the floating islands since it maintained the most efficient root and shoot balance among the macrophytes. The net primary productivity of P. Australis was 3,604 g/㎡ based on dry weight in 1999, with uptake rates of nitrogen and phosphorus estimated at 77.4 g/㎡/yr and 5.7 g/㎡/yr, respectively. The result of water quality simulation for the floating islands showed that, through adsorption of nutrients and light screening, they could reduce the amount of phytoplankton, thereby decreasing COD concentration.

• 멤브레인
• /
• 제28권6호
• /
• pp.432-443
• /
• 2018

본 연구에서는 Na형 Faujasite 제올라이트 분리막의 프로필렌/프로페인 분리 거동을 예측하기 위하여 제올라이트 13X 입자의 프로필렌 및 프로페인 단일기체에 대한 중량식흡착 거동을 관찰하고자 하였다. 제올라이트 13X 입자의 프로필렌 및 프로페인에 대한 중량식흡착 거동은 자성부유평형저울(MSB)을 이용하여 323, 343, 363 K의 온도와 0.02-1 bar의 압력 범위에서 0.1 bar씩 증가시키면서 측정되었다. 그 결과, 온도가 증가할수록 프로필렌 및 프로페인의 흡착량은 감소하였으며, 프로필렌/프로페인의 흡착 선택도는 증가하였다. 또한 흡착 온도가 증가함에 따라 프로필렌과 프로페인의 확산계수는 증가하여 아레니우스 식을 따랐고, 프로필렌/프로페인 확산 선택도는 323 K에서 0.9753으로 최대값을 가졌다. 흡착 특성을 통해 분리막의 투과선택도를 계산하였고, Na형 Faujasite 제올라이트 분리막의 단일 기체 투과 특성과 비교하였다. 그 결과 계산된 투과선택도와 측정된 투과선택도가 모두 323 K에서 최대값을 갖는 것을 확인하였다. 따라서 본 연구에서는 중량식 흡착법으로 예측된 분리막의 프로필렌/프로페인 분리거동 예측이 합리적이며 또한 표면확산에 기반한 프로필렌/프로페인 분리용 제올라이트 분리막의 분리성능예측에 적용될 수 있음을 알 수 있었다.

• Journal of Ginseng Research
• /
• 제35권4호
• /
• pp.487-496
• /
• 2011

Good manufacturing practice (GMP)-based quality control is an integral component of the common technical document, a formal documentation process for applying a marketing authorization holder to those countries where ginseng is classified as a medicine. In addition, authentication of the physico-chemical properties of ginsenoside reference materials, and qualitative and quantitative batch analytical data based on validated analytical procedures are prerequisites for certifying GMP. Therefore, the aim of this study was to propose an authentication process for isolated ginsenosides $Rb_1$ and $Rg_1$ as reference materials (RM) and for these compounds to be designated as RMs for ginseng preparations throughout the world. Ginsenoside $Rb_1$ and $Rg_1$ were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of the isolated ginsenosides was made according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantitation, and mass balance tests. The isolated ginsenosides were proven to be a single compound when analyzed by three different HPLC systems. Also, the water content was found to be 0.940% for $Rb_1$ and 0.485% for $Rg_1$, meaning that the net mass balance for ginsenoside $Rb_1$ and $Rg_1$ were 99.060% and 99.515%, respectively. From these results, we could assess and propose a full spectrum of physicochemical properties for the ginsenosides $Rb_1$ and $Rg_1$ as standard reference materials for GMP-based quality control.

• Environmental Engineering Research
• /
• 제23권1호
• /
• pp.92-98
• /
• 2018

Suitability of aluminium-based water treatment sludge (WTS), a waste product from water treatment facilities, was assessed for removal of heavy metals from an electroplating wastewater which had high concentrations of copper and chromium along with other heavy metals. Batch tests with simulated wastewater in single- and multi-metal solutions indicated the influence of initial pH and WTS dose on removal of six metals namely Cu(II), Co(II), Cr(VI), Hg(II), Pb(II) and Zn(II). In general, removal of cationic metals such as Pb(II), Cu(II) and Zn(II) increased with increase in pH while that of anionic Cr(VI) showed a reduction with increased pH values. Tests with multi-metal solution showed that the influence of competition was more pronounced at lower WTS dosages. Column test with diluted (100 times) real electroplating wastewater showed complete removal of copper up to 100 bed volumes while chromium removal ranged between 78-92%. Other metals which were present in lower concentrations were also effectively removed. Mass balance for copper and chromium showed that the WTS media had Cu(II) and Cr(VI) sorption capacities of about 1.7 and 3.5 mg/g of dried sludge, respectively. The study thus indicates that WTS has the potential to be used as a filtration/adsorption medium for removal of metals from metal-bearing wastewaters.

• 한국물환경학회지
• /
• 제28권1호
• /
• pp.109-114
• /
• 2012

In this study, both sedimentation and thickening experiments were conducted for residuals produced from an advanced water treatment plant for more accurate and practical design of residual treatment train. In order to design a backwashed residual sedimentation basin (SRSB) in the filter backwash water recycle system, two kinds of backwash waters, one from sand filter (SFBW) and the other from GAC adsorption bed (GACBW), were separately collected and their surface loading rate measured. In addition, in order to design a gravity thickener, batch thickening tests were conducted for concentrated residuals taken from sedimentation basin and their limiting solid flux ($SF_{L}$) measured. From the experimental results and consideration of the seasonal characteristics of the residual, surface loading rate of $70m^{3}/m^{2}{\cdot}d$ was proposed as a design parameter for SRSB and solid loading rate of 20 kg $TS/m^{2}{\cdot}d$ was proposed as a design parameter for gravity thickeners. Finally, the material mass-balance was made for the design of each unit process in the residual treatment train.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권4호
• /
• pp.8-18
• /
• 2013

Biocarrier beads with dead biomass, Bacillus drentensis, immobilized in polymer polysulfone were synthesized to remove heavy metals from wastewater. To identify the sorption mechanisms and theoretical nature of underlying processes, a series of batch experiments were carried out and a mathematical model was developed to quantify the biosorption of Pb(II) by the biocarrier beads. A series of mass balance equations for representing mass transfer of metal sorbents in biocarrier beads and surrounding solution were established. Major model parameters such as external mass transfer coefficient and maximum sorption capacity, etc. were determined from pseudo-first-order kinetic models and Langmuir isotherm model based on kinetic and equilibrium experimental measurements. The model simulation displays reasonable representations of experimental data and implied that the proposed model can be applied to quantitative analysis on biosorption mechanisms by porous granular beads. The simulation results also confirms that the biosorption of heavy metal by the biocarrier beads largely depended on surface adsorption.

• Macromolecular Research
• /
• 제13권6호
• /
• pp.521-528
• /
• 2005

Electrospun polyacrylonitrile (PAN) nanofibers were carbonized with or without iron (III) acetylacetonate to induce catalytic graphitization within the range of 900-1,500$^{circ}C$, resulting in ultrafine carbon fibers with a diameter of about 90-300 nm. Their structural properties and morphologies were investigated. The carbon nanofibers (CNF) prepared without a catalyst showed amorphous structures and very low surface areas of 22-31 $m^{2}$/g. The carbonization in the presence of the catalyst produced graphite nanofibers (GNF). The hydrogen storage capacities of these CNF and GNF materials were evaluated through the gravimetric method using magnetic suspension balance (MSB) at room temperature and 100 bar. The CNFs showed hydrogen storage capacities which increased in the range of 0.16-0.50 wt$\%$ with increasing carbonization temperature. The hydrogen storage capacities of the GNFs with low surface areas of 60-253 $m^{2}$/g were 0.14-1.01 wt$\%$. Micropore and mesopore, as calculated using the nitrogen gas adsorption-desorption isotherms, were not the effective pore for hydrogen storage.

• 대한환경공학회지
• /
• 제29권3호
• /
• pp.357-364
• /
• 2007

본 연구는 폐타이어의 재활용 일환으로 기존의 분말 화된 폐타이어 표면에 특정의 Functional group을 형성시켜 수중의 중금속이온들 과의 Chelate complexes 형성을 유도 함으로서 중금속 제거제로서의 폐타이어 활용방안을 제시 하고자 하였다. 이를 위해 FT-IR을 통하여 Function리 group의 종류 및 XRD, XRF, SEM 용출실험을 통해 개질 변화된 폐타이어 특성 분석하였으며 Kinetics Study를 통해 흡착모델에 적용하여 특정상수 값을 도출 하였다. 결과적으로 중금속 흡착 선호도는 $Pb^{2+}>Cu^{2+}>Cd^{2+}$순으로 확인되었으며, 초기 30분 이내에 흡착평형에 도달 하였고, 흡착반응속도 또한 0.27에서 $1.78\sim3.15(g/mg{\cdot}min)$로 증가하였으며, 80% 이상의 제거효율을 보였다. 이는 기존의 분말폐타이어에 비해 그 효율이 10배가량 증가함을 알 수 있었으며, Functional group을 활용한 폐타이어를 이용할 경우 중금속제거제로서의 뛰어난 효율성을 제시 할 수 있었다.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.498-505
• /
• 2008

천연망간광석과 천연망간광석에 금속산화물을 $Al_2O_3$와 $TiO_2$에 담지한 촉매을 이용하여 저온 선택적 산화 반응에 대하여 연구하였다. 망간계 금속산화물은 낮은 온도에서 우수한 암모니아 전환율을 나타내었다. NMO 존재하의 저온에서의 $O_2$와 $NH_3$의 흡착 활성화에너지는 각각 10.5와 22.7 kcal/mol 임을 밝혔다. 망간광석에 미량의 Ag를 함침함으로써 활성온도를 크게 낮출 수 있었다. 티타니아 담체의 경우 저온활성이 우수하게 나타나는 특성을 보였다. 또한 구리와 망간을 사용하면 망간을 단독으로 사용한 경우보다는 저온의 활성이 우수하게 나타난다. 망간이 5 wt.% 이상에서는 동일한 전환율을 나타내고 있으며, 저온 활성이 15 wt.%까지 약간 증가함을 알 수 있으며, 20 wt.%에서는 오히려 감소하는 것으로 나타나 있다. 황산화물의 피독실험 결과 본 연구에서는 최종적으로 망간에 조촉매의 첨가에 의한 내피독성의 향상은 공정의 복잡성과 비용면에서 망간의 단독 사용보다 낮게 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.405-410
• /
• 2020

In this literature, we are introduce a basic design of multi energy hub based on natural gas governor station. Multi energy hub consists of turbo expender generator, phosphoric acid fuel cell, pressure swing adsorption, H₂ charging station, utilities and etc. We design a hybrid energy hub system that provides energy using these complex energies, and calculates the amount of electricity that can be produced and the amount of hydrogen charged through the process analysis. TEG and phosphoric acid fuel cell produce 2,290 to 2,380 kW and can supply electricity to 500 houses. In addition, By-product H₂ gas is refined to H₂ vehicle fuel. This will help maximize the balance of energy demand and supply and improve national energy efficiency by integrating unused decompression energy power generation technology and various power generation/heat source technologies.