• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.403-408
• /
• 2007

According as diesel automobile are produced, reduce noise and vibration that is occurred by characteristic of diesel engine, and need engine room layout optimization and research for light weight of parts. Balance Shaft Module is module parts for vehicles engine to improve performance and efficiency of engine and reduce noise and vibration. These days, an oil pump integrated balance shaft module and an oil sump integrated balance shaft module is on the rising for optimizing of engine room. In this study, produced prototype of oil pump integrated type balance shaft module, and achieved dynamic characteristic test about experimental modal analysis and noise/vibration of balance shaft module.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.855-865
• /
• 2001

The optimization condition of injection molding for a commercial product of TV speaker grille of A Company was induced using a CAE software of Moldflow. The flow and packing phase analysis was performed by using flow balance, runner balance, and the intermediate one by using the above two balances, which were used for controlling the amount of packing resins into the cavity, Later, the analysis performed by using the measured viscosity (local database) at various shear rates and the results were compared with the computer simulation using the standard database. Flow balance induced minimized weld line resulted in a better appearance and physical properties of the were line, but exhibited a disadvantage of large deformation and gas formation due to over-packing of the molten resin in the center of the speaker grille. Runner balance improved the disadvantage of the flow balance by controlling the amount of molten resin injected from the gate, however resulted reduced mechanical properties and poor appearance of the weld line. However, the modified method induced from the flow and runner balance improved the disadvantages by changing the runner size. In addition, the analyses based on the local database and the standard database were compared. Although the measured viscosity was slightly higher and the temperature distribution was broader than the standard database, no distinct difference was obtained from the analysis using the two different databases.

• Korean Journal of Occupational Health Nursing
• /
• v.26 no.2
• /
• pp.114-123
• /
• 2017

Purpose: This study aimed to explore personal as well as occupational factors and health status associated with work-life balance in Korean registered nurses. Methods: This study was a secondary data analysis using cross-sectional nationally representative data from the Korean Working Conditions Survey (KWCS) in 2014. Study participants included 450 registered nurses in South Korea. Descriptive analysis, Independent t-test, $x^2$ test, and Logistic regression analyses were performed using the SPSS 21.0 statistical program. Results: Work-life balance was reported in 70.6% individuals with 85.7% being male and 70.0% being female nurses. Logistic regression analysis revealed that being male good health state, having less than 40-hour working week, lower number of night duty, policy on flexible work arrangement were significant predictors of work-life balance. Conclusion: This study provided evidence that identify predictors of work-life balance in registered nurses in South Korea. Therefore, we need the actively support health care service promotion and prevention for work-life balance predictors.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.843-847
• /
• 2014

In Super Junction (SJ) MOSFETs, charge balance is the most important issue of the SJ fabrication process. In order to achieve the best electrical characteristics, such as breakdown voltage and on-resistance, the N-type and P-type drift regions must be fully depleted when the drain bias approaches the breakdown voltage, which is known as the charge balance condition. In conventional charge balance analysis, based on multi-epi process SJ MOSFETs, analytical model has only N, P pillar width and doping concentration parameter. But applying a conventional charge balance principle to trench filling process, easier than Multi-epi process, is impossible due to the missing of the trench angle parameter. To achieve much more superior characteristics of on-resistance in trench filling SJ MOFET, the appropriate trench angle is necessary. So in this paper, modulated charge balance analysis is proposed, in which a trench angle parameter is added. The proposed method is validated using the TCAD simulation tool.

• Korean Journal of Childcare and Education
• /
• v.20 no.3
• /
• pp.43-66
• /
• 2024

Objective: The purpose of this study is to investigate the direct effect of organizational health, as perceived by childcare teachers, on their turnover intention, and to examine the mediating effect of work-life balance on the relationship between these two variables. Methods: The subjects of this study were 345 childcare teachers working at 45 childcare centers located in Gyeonggi-do. Descriptive statistics, factor analysis, reliability analysis, and Pearson correlation analysis were performed using SPSS 21.0. Additionally, the mediating effect was verified using the PROCESS Macro, and bootstrapping was performed to confirm the significance of the indirect effect. Results: First, there was a significant negative correlation between the organizational health of childcare centers, the turnover intention of childcare teachers, and their work-life balance. Second, it was found that work-family balance completely mediated the relationship between the organizational health of childcare centers and the turnover intention of childcare teachers, while work-leisure balance and work-growth balance partially mediated the relationship between these two variables. Conclusion/Implications: This study provides essential data for examining ways to lower the turnover intention of childcare teachers by addressing both individual and organizational dimensions.

• Journal of Biomedical Engineering Research
• /
• v.9 no.2
• /
• pp.233-238
• /
• 1988

Human body sways continuously to maintain balance during upright stance. A computer-aided instrumentation system using a force platform has been developed to investigate the body balance. The Kistler force platform and amplifiers were only used to obtain the precise measurements, and the data acquisition and analysis software operating on an IBM PC with A/D converter was developed. This study presents methods for the display of platform center of pressure data on stability study. This system can be used as a tool in evaluating the man's ability to balance and disorders of the nervous system.

• Journal of Families and Better Life
• /
• v.24 no.6 s.84
• /
• pp.131-145
• /
• 2006

This study analyses factors facilitating work-family balance through quantitative research and case study. A sense of balance is more closely related to cognition and satisfaction in work and family than demographic factors. Based on these results, two kinds of educational programs for employees and employers were developed. Both programs consist of 4 sessions and focus on the necessity of work-family balance and the application of family-friendly policie.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.603-607
• /
• 2002

Cavity pressure is a factor of what is occurring inside the mold and is used as one of the process parameters that control the overall injection molding cycle. The insight of cavity pressure is able to predict part quality and optimum process condition. In this paper, it is adapted ejector pin sensor to measure the cavity pressure and investigates the flow balance and the cavity pressure according to different runner thickness for adjusting the flow balance. Flow balance is very important to have not the poor results such as flash and warpage in the family mold. This paper predicted flow balance and cavity pressure using CAE analysis tool and compared with the test results. The results of analysis and test have a good agreement with the cavity pressure profile and flow pattern of the test.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.11
• /
• pp.89-95
• /
• 2015

In this paper, we propose the method and development of custom-made golf insole recommender system to optimize the foot balance during golf swing. This system development procedures are as follows : (1) Using the measured data of the golf swing, the analysis of the individual golf hitting and balance will be done. (2) Based on the analysis results, the system will recommend the golf custom-made insole to optimize the individual balance using recommender algorithm. (3) After the golf custom-made insole is recommended, the modeling and design of the recommended insole is processed. Golf custom-made insole will be possible to reduce the excessive shaking and increase the lower-body supporting force. Therefore, we have expected that the recommended insole will improve the swing results through the optimization of golf swing balance. In the future, it is necessary to secure the higher validity and reliability through the more diverse experiments and research.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.3
• /
• pp.105-109
• /
• 2017

PURPOSE: The purpose of this study was to investigate the effect of ankle dual task including motor training on the static balance, dynamic balance in the elderly. METHODS: 30 elderly people were randomly divided into 3 groups: 10 people in the single motor task group, 10 people in the double motor dual task group and 10 people in the motor-cognitive dual task group. In the double motor dual tasks group was performed ankle balance motor task additional motor task. Motor-cognitive dual task group was performed ankle balance motor task additional cognitive task. Single motor task group was performed ankle balance motor task. It was performed three times intervention a week for six weeks. Statistical analysis method was performed using one way ANOVA for comparison between groups, and the paired t-test was used for comparison pre and post intervention. RESULTS: Static and dynamic balance were significant differences between pre and post intervention by three groups (p<.05). In static balance, there was a significant difference among groups (p<.05), but there was not a significant difference between groups in dynamic balance (p>.05). CONCLUSION: The results of the research, the ankle balance dual task including motor or cognitive task was more effective than single motor task on static balance in the elderly.