• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.296-307
• /
• 2020

Compared to the quantitative increase in women's workforce, women's status in the organization remains poor. When it needs diverse perspectives and flexibility cope with the environment, it is an urgent challenge for companies to manage women in organizations. In this study, it is explored the internal factors of the organization that allow women managers to be more immersed in the organization. While previous researches have focused mainly on employment equality policies, this study expands the scope of existing research by considering the organization's internal support factors, such as mentoring, education and training, and organizational atmosphere. The female manager panel data showed that mentoring, education and training, and organizational climate all increase the leading influence of female. This leading influence affects organizational commitment and mediated between organizational internal factors and organizational commitment. In other words, it has been found that it is important for female managers to take the initiative in their position as well as the internal support of companies for female managers to immerse themselves in the organization. This study could contribute to solving the dilemma of the use of women's workforce by companies that fail to recover all investment costs such as recruitment, education, training, and compensation of excellent women's workforce.

• Korean Journal of Oriental Medicine
• /
• v.6 no.1
• /
• pp.123-132
• /
• 2000

Bone is continuously remodeled during adult life with the resorption of old bone by osteoclasts and its subsequent replacement by osteoblast. Bone homeostasis is maintained by a balance between activities of osteoblasts and osteoclasts, but an imbalance between resorption and formation results in bone diseases including osteoporosis. Osteoblasts line up on the bone surface, especially regions of new bone formation, lay down bone matrix (osteoid) in orderly lamellae and induce its mineralization. Thus, the increased activity of osteoblasts is helpful to treat and prevent osteoporosis. In this study, we examined whether 80% EtOH extract of yukmijiwhang-whan is capable of affecting osteoblast proliferation using human osteoblast-like cell line, MG-63 and Saos-2. In an in vivo experiment, extract of yukmijiwhang-whan was administered for 9 weeks to ovariectomized (OVX) rats. At necropsy, uterus weights were measured, and trabecular bone areas (TBAS) of tibia and the sixth lumbar vertebra were measured by bone histomorphology. The maximum cell proliferation of MG-63 caused by extract of yukmijiwhang-whan at $5\;{\times}\;10^{-6}\;mg/ml$ was approximately 115% compared with control. In Saos-2, cell proliferation was approximately 145% of control at $5\;{\times}\;10^{-4}\;mg/ml$ and maximum alkaline phosphatase (ALP) activity was approximately 143% of control at $5\;{\times}\;10^{-5}\;mg/ml$. In animal study, however, the tibia and lumbar TBAS of the yukmijiwhang-whan group did not increased than the OVX control group. In conclusion, the 80% EtOH extract of yukmijiwhang-whan increased proliferation of osteoblasts but did not prevent bone loss in OVX rats.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.381-389
• /
• 2020

This study analyzed the optimal electricity cost of a 100% renewable energy source (RES) based system. Especially energy storage system (EES) and supplementary biopower system as well as photovoltaic (PV) and wind power component were included in the proposed RES-based system to overcome the intermittence of RESs and to efficiently balance energy supply and demand. To comparatively analyze the levelized cost of electricity (LCOE) of different RES-based systems, six scenarios were developed according to the involved RESs: PV, wind, PV/wind, PV/biopower, wind/biopower, and PV/wind/biopower systems. We then applied the proposed systems to build a 100% RES-based system in Jeju Island, Korea. As a result, the single component based system, PV and wind power system of 0.18 and 0.28 $/kWh, respectively, cannot compete with the economics of existing electricity grid. However, the optimal LCOE of the hybrid system where PV and wind power are used as main supply options and biopower as supplementary option was identified to be 0.08 $/kWh, which can compete with the economics of an existing electricity grid.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.410-420
• /
• 2016

Recently, the R&D paradigm has become oriented toward convergence technology and interdisciplinary research. In this study, to elucidate the characteristics of research groups that promote the performance of convergence research, we take into account the input characteristics, disciplinary characteristics and collaborative characteristics of research groups. For this study purpose, 5,217 SCI papers published from 104 centers in Advanced Research Center Projects are analyzed as research outputs. The research findings are that the disciplinary balance in the interdisciplinary characteristics and the number of partners in the collaborative characteristics are positively related to the convergence of R&D outputs. The research field of a group introduced as a control variable exerts a significant effect on the convergent R&D outputs. In conclusion, it is necessary to organize internally with the same number of each disciplinary researcher in a research group and to activate external collaboration with partners in order to produce more outputs of convergent research.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.133-139
• /
• 2014

Oil-in-water nanoemulsions were prepared in the system of water/Span 80-Tween 80/long-chain paraffin oil via the PIC (phase inversion composition) method. With the increase of preparation temperature from $30^{\circ}C$ to $80^{\circ}C$, the diameter of emulsion droplets decreased from 120 nm to 40 nm, proving the formation of nanoemulsions. By varying the HLB (hydrophilic lipophilic balance) of mixed surfactants, we found that there was an optimum HLB around 12.0 ~ 13.0 corresponding to the minimum droplet size. The viscosity of nanoemulsions clearly increased with droplet volume fraction, f, but the droplet size slightly increased. Significantly, at ${\phi}{\leq}0.3$, the size distribution of nanoemulsions kept constant more than 2 months. These results proved that the viscous paraffin oil can hardly be dispersed by the PIC method at $30^{\circ}C$, but the increase in preparation temperature makes it possible for producing monodisperse nanoemulsions. Once the nanoemulsion is produced, the stability against Ostwald ripening is outstanding due to the extremely low solubility of the liquid paraffin oil in the continuous phase. The highly stable nanoemulsions are of great importance in cosmetic applications.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.135-142
• /
• 2008

The primary innovation in the new footwear is a heel lift of $20^{\circ}$ which is proposed to improve posture and balance as well as increase shock absorption. The purpose of this research was to compare the movement, forces and muscle activity between the new shoes and standard athletic footwear during standing and walking. Nine healthy subjects participated in this study. Data were collected at two times: 1) when the subjects first wore the new walking shoes and 2) after the subjects wore the shoes for 6 hours a day for two weeks. 1. During standing. the movement of the center of pressure is increased approximately 60% when wearing the new walking shoes compared to a control shoe. 2. During walking. the ankle is approximately $14^{\circ}$ more dorsiflexed during landing due to the 200heel lift in the new walking shoes. The knee compensates slightly by flexing approximately $2^{\circ}$ more. 3. As a result of the changes in the walking movement, the ground reaction forces are applied more quickly, although the peak magnitudes do rut change. 4. The resultant joint moments at the ankle and knee joints decrease from 21-60% with the largest reductions occurring during landing. In conclusion, the new footwear change the movement, showing a more upright stance. Also, the new footwear reduce joint loading at the joint during the landing and weight acceptance phase of walking. However, the influence of the new footwear is immediate and does rut change after wearing the shoes for two weeks.

• Geophysics and Geophysical Exploration
• /
• v.23 no.3
• /
• pp.131-140
• /
• 2020

In training a classification model using machine learning, the acquisition of training data is a very important stage, because the amount and quality of the training data greatly influence the model performance. However, when the cost of obtaining data is so high that it is difficult to build ideal training data, the number of samples for each class may be acquired very differently, and a serious data-imbalance problem can occur. If such a problem occurs in the training data, all classes are not trained equally, and classes containing relatively few data will have significantly lower recall values. Additionally, the reliability of evaluation indices such as accuracy and precision will be reduced. Therefore, this study sought to overcome the problem of data imbalance in two stages. First, we introduced weighted accuracy and weighted precision as new evaluation indices that can take into account a data-imbalance ratio by modifying conventional measures of accuracy and precision. Next, oversampling was performed to balance weighted precision and recall among classes. We verified the algorithm by applying it to the problem of facies classification. As a result, the imbalance between majority and minority classes was greatly mitigated, and the boundaries between classes could be more clearly identified.

• Journal of Ginseng Research
• /
• v.37 no.1
• /
• pp.124-134
• /
• 2013

The authentication of the physico-chemical properties of ginsenosides reference materials as well as qualitative and quantitative batch analytical data based on validated analytical procedures is a prerequisite for certifying good manufacturing practice (GMP). Ginsenoside Rb1 and Rg1, representing protopanaxadiol and protopanaxatriol ginsenosides, respectively, are accepted as marker substances in quality control standards worldwide. However, the current analytical methods for these two compounds recommended by Korean, Chinese, European, and Japanese pharmacopoeia do not apply to red ginseng preparations, particularly the extract, because of the relatively low content of the two agents in red ginseng compared to white ginseng. In manufacturing fresh ginseng into red ginseng products, ginseng roots are exposed to a high temperature for many hours, and the naturally occurring ginsenoside Rb1 and Rg1 are converted to artifact ginsenosides such as Rg3, Rg5, Rh1, and Rh2 during the heating process. The analysis of ginsenosides in commercially available ginseng products in Korea led us to propose the inclusion of the (20S)- and (20R)-ginsenoside Rg3, including ginsenoside Rb1 and Rg1, as additional reference materials for ginseng preparations. (20S)- and (20R)-ginsenoside Rg3 were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of those isolated ginsenosides was achieved according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantification, and mass balance tests. The isolated ginsenosides showed 100% purity when determined by the three HPLC systems. Also, the water content was found to be 0.534% for (20S)-Rg3 and 0.920% for (20R)-Rg3, meaning that the net mass balances for (20S)-Rg3 and (20R)-Rg3 were 99.466% and 99.080%, respectively. From these results, we could assess and propose a full spectrum of physico-chemical properties of (20S)- and (20R)-ginsenoside Rg3 as standard reference materials for GMP-based quality control.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.263-263
• /
• 2006

Poly (ethylene glycol)(PEG) - Poly (${\varepsilon}-caprolactone(CL)$) - Poly (D,L lactide(LA) (PCLA-PEG-PCLA) was synthesized by ring-opening polymerization to form temperature sensitive hydrogel triblock copolymer. The triblock copolymer was acrylated by acryloyl chloride. ${\beta}-amino$ ester was used as a pH sensitive moiety, in this study ${\beta}$- amino ester obtained from 1,4-butandiol diacrylate, and 4, 4' trimethylene dipiperidine, it have pKb around 6.6. pH/temperature sensitive penta-block copolymer (PAE-PCL-PEG-PCL-PAE) was synthesized by addition polymerization from acrylated triblock copolymer, 1,4-butandiol diacrylate, and 4, 4' trimethylene dipiperidine. Their physicochemical properties of triblock and penta-block copolymers were characterized by $^1H-NMR$ spectroscopy and gel permeation spectroscopy. Sol-gel phase transition behavior of PAE-PCL-PEG-PCL-PAE block copolymers were investigated by remains stable method. Aqueous media of the penta-block copolymer (at 20 wt%) changed from a sol phase at pH 6.4 and $10^{\circ}C$ to a gel phase at pH 7.4 and $37^{\circ}C$. The sol-gel transition properties of these block copolymers are influenced by the hydrophobic/hydrophilic balance of the copolymers, block length, hydrophobicity, stereo-regularity of the hydrophobic of the block copolymer, and the ionization of the pH function groups in the copolymer depended on the changing of environmental pH, respectively. The degradation and the stabilization at pH 7.4 and $37^{\circ}C$, and the stabilization at pH 6.4 and $10^{\circ}C,\;5^{\circ}C,\;0^{\circ}C$, of the gel were determined. The results of toxicity experiment show that the penta block copolymer can be used for injection drug delivery system. The sol?gel transition of this block copolymer also study by in vitro test ($200{\mu}l$ aqueous solution at 20wt% polymer was injected to mouse). Insulin loading and releasing by in vitro test was investigated, the results showed that insulin can loading easily into polymer matrix and release time is around 14-16days. The PAE-PCL-PEG-PCL-PAE can be used as biomaterial for drug, protein, gene loading and delivery.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.2
• /
• pp.43-49
• /
• 1986

In the light of real situation of Korean timber resources, it is no wonder that Korean economy depends on a lot of imported timber, however, we only need to draw attention how have they kept the balance of payment in the field of forest products trade for the last few decades, until the second oil crisis in 1979. Afterwards, the gap between imports and exports of forest products in terms of value has been widened so far, on account of various reasons inside and outside. However, according to national economic policy to drive more active exportation, new policy and strategy to expend world market of forest products urgently expectable in order to shorten the gap between imports and exports of forest products in the future. On the other hand, the current timber importation policy should be reconsidered, not only to support optimum domestic timber price level so as to compensate timber producers' cost but also to make suitable economic environment to induce new investments in the field of private forestry sector.