• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.517-525
• /
• 2009

42V electrical power systems are on their way to replacing the present l4V systems in automobiles and 42V/14V dual voltage systems have been proposed to provide backward compatibility with the existing components for the 14V systems. A synchronous buck/boost converter is an attractive topology for 42V/14V dual voltage systems since it offers the possibility of bi-directional operation without additional components. In this paper, transient currents generated during converter startup or changes in operation modes between buck and boost are analyzed and a cost effective solution to remove the transient currents is proposed. The validity of the proposed control strategy is investigated through simulation and experiment with bi-directional converters.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.9
• /
• pp.97-106
• /
• 1996

In this paper, we propose a face recognition algorithm using the hidden markov model and neural networks (HMM-NN). In the preprocessing stage, we find edges of a face using the locally adaptive threshold (LAT) scheme and extract features based on generic knowledge of a face, then construct a database with extracted features. In the training stage, we generate HMM parameters for each person by using the forward-backward algorithm. In the recognition stage, we apply probability vlaues calculated by the HMM to subsequent neural networks (NN) as input data. Computer simulation shows that the proposed HMM-NN algorithm gives higher recognition rate compared with conventional face recognition algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.771-781
• /
• 1997

In order to solve the problem of uncovered background region due to the region-due to the region-based motion estimation, this paper presents a new method which generates the uncovered region memory using motion estimation and shows the application of the algorithm for very low bit rate video coding. The proposed algorithm can be briefly described as follows it detects the changed region by using the information of FD(frame difference) and segmentation, and then as for only that region the backward motion estimation without transmission of shape information is done. Therefore, from only motion information the uncovered background region memory is generated and updated. The contents stored in the uncovered background region memory are referred whenever the uncovered region comes into existence. The regions with large prediction error are transformed and coded by using DCT. As results of simulation, the proposed algorithm shows the superior improvement in the subjective and objective image quality due to the remarkable reduction of transmission bits for prediction error.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.946-948
• /
• 1996

In this paper, we consider a 2-dimensional pursuit-evasion game between a maneuvering target and a coasting missile using qualitative game theory. The optimal evasion algorithm of the target and the optimal guidance algorithm of the missile are determined and the barrier trajectories of this game are obtained through computer simulation. The optimal strategy of the missile and target is to turn toward the final line of sight direction using maximum input and maintain its direction. The capture set of the missile can be obtained by backward integration from the BUP.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.554-557
• /
• 2003

This paper describes the information for quantitative simulation of weakly ionized plasma. We should grasp the meaning of the plasma state condition to utilize engineering application and to understand materials of plasma state. In this paper, electron swarm parameter in He+Xe and Ar+He mixture gas calculated for range E/N values $0.01{\sim}500$ [Td] at the temperature is 300 [K] and pressure is 1 [Torr], using a set of electron collision cross sections determined by the authors, and using a method of Backward Prolongation by two term approximation Boltzmann equation method, for basic study on the gas discharge panel.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.407-410
• /
• 2024

본 논문에서는 Semi-Lagrangian 이류 과정에서 역추적(Backward tracing)한 위치의 주변 속도를 Divergence-constrained MLS(Moving least squares)를 이용하여 보간하고 그 결과를 이류된 속도 데이터의 외력으로 적용해 연기 시뮬레이션의 난류 표현을 개선할 수 있는 새로운 프레임워크를 제안한다. 일반적인 MLS는 고차보간법이기 때문에 시간에 따른 연속성 보장이 안 되기 때문에 그 결과가 노이즈한 형태로 나타난다. 본 논문에서는 연기의 원본 속도와 제안하는 기법을 통해 생성된 속도 간의 각도 변화를 통해 난류를 생성하며 이를 통해 안정적이고 연기의 밀도를 이류시킨다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.555-565
• /
• 2021

The goal of this study is to improve flow and noise performances of existing backward-curved blade centrifugal fan system used for circulating cold air in a refrigerator freezer by optimally designing airfoil shape. The unique characteristics of the system is to drive cold airflow with two volute tongues in combination with duct system in a back side of a refrigerator without scroll housing generally used in a typical centrifugal fan system. First, flow and noise performances of existing fan system were evaluated experimentally. A P-Q curve was obtained using a fan performance tester in the flow experiment, and noise spectrum was measured in an anechoic chamber in the noise experiment. Then, flow characteristics were numerically analyzed by solving the three-dimensional unsteady Navier-Stokes equations and noise analysis was performed by solving the Ffowcs Williams and Hawkins equation with input from the flow simulation results. The validity of numerical results was confirmed by comparing them with the measured ones. Based on the verified numerical method, blade inlet and outlet angles were optimized for maximum flow rate using the two-factor central composite design of the response surface method. Finally, the flow and noise performances of a prototype manufactured with the optimum design were experimentally evaluated, which showed the improvement in flow and noise performance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.60-67
• /
• 2019

To understand the low frequency instability(LFI) characteristics in hybrid rockets combustion, effects of equivalence ratio variations on the phase shift between pressure and heat release oscillations were investigated by using the direct numerical simulation. The change in the equivalence ratio of the main chamber was simulated by the temperature and composition variation of the combustion gas introduced into the post-combustion chamber. In the results, additional combustion appeared along with vortex generation at the backward step, and combustion pressure and heat release oscillations were observed as the vortex moved. In addition, the results confirmed that the phase difference between the pressure and heat release oscillation shifts because of the changes in the propagation velocity of pressure wave as the temperature of combustion gas changes.

• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• The Journal of Korea Robotics Society
• /
• v.3 no.4
• /
• pp.331-337
• /
• 2008

The field of robots is being widely accepted as a new technology today. Many robots are produced continuously to impart amusement to people. Especially the robot which operates with a wheelbarrow was enough of a work of art to arouse excitement in the audiences. All the wheelbarrow robots share the same technology in that the direction of roll and pitch are acting as balance controllers, allowing the robots to maintain balance for a long period by continuously moving forward and backward. However one disadvantage of this technology is that they cannot avoid obstacles in their way. Therefore movement in sideways is a necessity. For the control of rotation of yawing direction, the angle and direction of rotation are adjusted according to the velocity and torque of rotation of a motor. Therefore this study aimed to inquire into controlling yawing direction, which is responsible for rotation of a robot. This was followed by creating a simulation of a wheelbarrow robot and equipping the robot with a yawing direction controlling device in the center of the body so as to allow sideway movements.