• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.393-396
• /
• 2004

In this paper, multifrequency, polarimetric SAR data acquired during the first SIR-C/XSAR mission over the Seoul and Gyunggi-do (Korea) test sites are analyzed. The main objective of the study is to assess the possibility of extracting relevant information about surface properties for geophysical applications using polarimetry. This study analyses the characteristics of polarization responses and polarimetric parameters to conditions present in urban, river, agricultural, and forested areas. Results indicate that the dominant scattering property from these fields varies depending on the land cover types. The polarization response graphs and the backscattering coefficients associated with the polarimetric parameters are also useful in characterizing these cover types.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.56-59
• /
• 2003

Wurtzite GaN films are grown by low-pressure MOCVD on (0001)-plane sapphire substrates. The GaN films have a total thickness of 4 $\mu$m with a surface Mg-doped p-type layer, which has a thickness of 0.5 $\mu$m. 90k eV $Mn^{+}$ ions are implanted into the GaN films at room temperature with doses ranging from $1 \times10^{15}$ to $1 \times 10^{16}\textrm{cm}^{-2}$. After an annealing step at $770^{\circ}C$ in flowing $N_2$, the structural characteristics of the $Mn^{+}$ implanted GaN films are studied by X-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS) and atomic force microscopy (AFM). The structural and morphological changes brought about by $Mn^{+}$ implantation and annealing are characterized.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.39-40
• /
• 1998

Diffusion barrier characteristics of hf(C,N) thin films for Cu metalliztion was investgated. Hf(C,N) thin films were depposited on Si(100) suvstrates by ppulsed D. C pplasma enhanced metal-organic chemical vappor depposition (ppE-MOCVD) using Tetrakis diethyl amido hafnium (Hf[NC2H5)2]4 : TDEAHf) and N2 as pprecursors. X-ray diffraction analyses sheet resistance measurment and Rutherford backscattering sppectroscoppy analyses revealed that HF(C,N) films pprevent diffusion of Cu fairly well upp to $600^{\circ}C$. At $700^{\circ}C$ however Hf(C,N) films allowed a significant diffusion of Cu into the Si substrate.

• Applied Science and Convergence Technology
• /
• 제25권2호
• /
• pp.36-41
• /
• 2016

Similarity and diversity of various quantum ring structures are investigated by classifying energy dispersions of three different structures: an electrostatic quantum ring, a magnetic quantum ring, and a magnetic-electric quantum ring. The wave functions and the eigenenergies of a single electron in the quantum ring structures are calculated by solving the Schrdinger equation without any electron-electron interaction. Magnetoconductance is studied by calculating a two-terminal conductance while taking into account the backscattering via the resonance through the states of the quantum rings at the center of a quasi-one dimensional conductor. It is found that the energy spectra for the various quantum ring structures are sensitive to additional electrostatic potentials as well as to the effects of a nonuniform magnetic field. There are also characteristics of similarity and diversity in the energy dispersions and in the single-channel magnetoconductance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2447-2449
• /
• 1999

This paper presents a distributed temperature sensor which uses a multimode optical fiber. The temperature distribution is derived from the intensity of the Raman back scattering light. Testing the sensors on measurement length of 2km of this system shows good temperature characteristics of the heated/cooled section. These performance will useful to design such as monitoring abnormal temperature rise of electric facilities.

• 한국표면공학회지
• /
• 제25권2호
• /
• pp.73-81
• /
• 1992

The composite coating of suspended inert particles $\alpha$-Al2O3 and copper from acid sulphate bath was investigated at the Rotating Disk Electrode. Effects of rotation speeds of electrode, physical properties of electrolyte, the size and concentration of suspended particles on the codeposition ratio of Al2O3 and the enhancement of mass transfer of copper ions were examined. Particularly, new experimental method for the measurement of the codeposition ratio was suggested and also the characteristics of the composite coating layer were measured by Rutherford Backscattering Spectrometry. Mass transfer of suspended particles system were increased up to 40% more than those of without suspended particles system. Optimum conditions of current density, hydrodynamics of RDE, and particles concentration showing maximum codeposition ratio were appeared in our experimental ranges. It was shown that the suspended inert particles were codeposited mainly near the surface of the composite coating layer.

• Structural Monitoring and Maintenance
• /
• 제2권4호
• /
• pp.357-382
• /
• 2015

This paper provides an overview of the use of different Distributed Optical Fiber Sensor systems (DOFSs) to perform Structural Health Monitoring (SHM) in the specific case of civil engineering structures. Nowadays, there are several methods available for extracting distributed measurements from optical fiber, and their use have to be according with the aims of the SHM performance. The continuous-in-space data is the common advantage of the different DOFSs over other conventional health monitoring systems and, depending on the particular characteristics of each DOFS, a global and/or local health structural evaluation is possible with different accuracy. Firstly, the fundamentals of different DOFSs and their principal advantages and disadvantages are presented. Then, laboratory and field tests using different DOFSs systems to measure strain in structural elements and civil structures are presented and discussed. Finally, based on the current applications, conclusions and future trends of DOFSs in SHM in civil structures are proposed.

• 한국재료학회지
• /
• 제6권6호
• /
• pp.626-631
• /
• 1996

Reactive dc magnetron sputtering 법을 이용하여 증착한 molybdenum mitride 박막의 Cu 확산 방지막 특성을 조사하였다. Cu 확산 방지막으로서 molybdenum nitride 박막의 열적안정성을 관찰하기 위하여 molybdenum nitride 박막 위에 Cu를 evaporation 법으로 증착하고 진공 열처리하였다. Cu/r-Mo2N/si 구조는 $600^{\circ}C$, 30분간 열처리 시까지 안정하였다. 확산 방지막의 파괴는 $650^{\circ}C$, 30분간 열처리 시부터 격자 확산(lattice diffusion)이나 입계(grain boundary)과 결함(defect)을 통한 확산에 의해 나타나기 시작하였고, 이 때 molybdenum silicide과 copper silicide의 형성에 기인된 것으로 생각되었다. 열처리 이후 Cu/r-Mo2N/Si 사이의 상호반응이 증가하였다. 이는 Rutherford backscattering spectrometry, Auger electron spectroscopy 그리고 Nomarski microscopy 등의 분석을 통해 조사되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1084-1086
• /
• 2003

The aim of this study is to assess the integrated use of different features extracted from spaceborne interferometric synthetic aperture radar (InSAR) data and optical data for land cover classification. Special attention is given to the discriminatory characteristics of the features derived from the multisource data sets. For the evaluation of the features , the statistical maximum likelihood decision rule and neural network classification are used and the results are compared. The performance of each method was evaluated by measuring the overall accuracy. In all cases, the performance of the first method was better than the performance of the latter one. Overall, the research indicated that multisource data sets containing different information about backscattering and reflecting properties of the selected classes of objects can significantly improve the classification of land cover types.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.867-871
• /
• 2012

The microstructure and texture of TiN coatings on a Ni-based super-alloy were characterized by the automated version of electron backscatter diffraction (EBSD), EBSD techniques were used to investigate the very fine TiN grain shape and crystal orientation. This study confirmed that EBSD techniques provide a very useful tool for characterization of coating materials. The TiN grains had a special texture, a {001}-fiber texture in the coating layer. It was also found that, in severe environments, the coating performance of equiaxial and randomly oriented TiN is superior to that with columnar structures.