• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.92-108
• /
• 2015

This study aimed at developing a down jacket prototype that utilized sunlight as an alternative energy source with no air pollution. The jacket is filled with flexible solar panels and has a heat-generating function and LED function. In this study, three smart down jacket prototypes were developed, and the jacket's capabilities were demonstrated through the thermal effect on the performance test. The typical output voltage of the flexible solar panels was 6.4V. By connecting the 2 solar cell modules in series, the final output voltage was 12.8V. A battery charge regulator module was used the KA 7809 (TO-220) of 9V. Three heating pads were to be inserted into the belly of the jacket as direct thermal heating elements, and the LED module was configured, separated by a flash and an indicator. The smart down jacket was designed to prevent damage to the down pack without the individual devices' interfering with the human body's motion. Because this study provides insulation from extreme cold with a purpose, the jacket was tested for heat insulation properties of non-heating, heating on the back, heating on the abdomen, and heating on both the back and abdomen in a sitting posture in a static state. Thermal property analysis results from examining the average skin temperature, core temperature, and the temperature and humidity within clothing showed, that placing a heating element in one place was more effective than distributing the heating elements in different locations. Heating on the back was the most effective for maintaining optimal skin temperature, core temperature, and humidity, whereas heating on the abdomen was not effective for maintaining optimal skin temperature, core temperature, or humidity within clothing because of the gap between the jacket and the body.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.2
• /
• pp.289-302
• /
• 2009

Objectives : This study was performed in order to investigate the relation of body composition analysis and radiological parameter(lumbosacral angle, lumbar lordortic angle, lumbar gravity line). Methods : This study was carried out with the data from comprehensive medical testing. 75 subject aged 20-59 performed the segmental bioelectrical impedance analysis, questionnaire. And lumbosacral angle, lumbar lordortic angle and lumbar gravity line were measured in the standing position x-ray. Then we analyzed the data. Results : Low back pain(LBP) prevalence in high obesity index(Body Mass Index(BMI), Percentage of Body Fat(PBF), Waist Hip Ratio(WHR)) group was higher than LBP prevalence in normal obesity index group(p<0.01). In LBP group, lumbosacral angle, lumbar lordortic angle were significantly lager than Non-LBP group(p<0.001). And 75% of LBP group indicated abnormal lumbar gravity line ratio(0.67 < Normal lumbar gravity line ratio <1.00). When it comes to analyze relation between obesity index and radiological parameter, no-significant change was seen. Conclusions : This study carried as following research after the study on relation of obesity, LBP and trunk muscle strength. Results from this investigation showed positive correlation between obesity and LBP prevalence. But obesity index didn't indicate significant correlation with structural changes of lumbar vertebrae. When considering prior research, trunk muscle strength changes were more related to LBP prevelence in obese people. This results are expected to explain causes of LBP in obese group.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.5 no.1
• /
• pp.111-124
• /
• 2010

Objectives: The purpose of this study is to report clinical effects of oriental medicine w~h conservative treatments including acupuncture, Chuna treatment and herbal medicine on a patient with low back pain and lower limb numbness caused by HIVD and schwannoma. Methods: The patient was diagnosed with HIVD and schwannoma through the MRI scan. This case was treated with acupuncture, Chuna treatment and herbal medicine during the whole admission period. We evaluated the progress of the symptoms with objective criteria such as NRS(Numerical Rating Scale), SLRT(Straight Leg Raising Test), ODI(Oswestry Disability Index) score and MMT(Manual Muscle Testing). Results and Conclusions: After weeks of conducting conservative treatment on patient with low back pain and lower limb numbness caused by HIVD and schwannoma occurred at the lumbar spine, significant improvements of the symptoms were seen. These results suggest that in the case of low back pain and lower limb numbness caused by HIVD and schwannoma, conservative treatments can be considered as one of the options of treating the symptoms beside surgical way.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.3_4
• /
• pp.429-440
• /
• 2003

The purpose of this study is to classify the types of men's shoulders through the criteria which represent the characteristic of men's shoulders. In addition, we introduce new bodice patterns depending on our classification. We have the fo11owing conclusions based on our sample size of 200 men's shoulders: 1. The result of factor analysis indicates that six factors are extracted and they consist of 62.3% of total variance. We then choose three factors as standard items for our classification of the shape of men's shoulders. 2. We divide the shape of shoulders into three categories: bent, slopeness, and thickness. Each category is divided into three subcategories. (a) Bent: If one's shoulders are bent forward or backward, then we call them front or back-bent type. Otherwise, they are called standard-bent type. (b) Slopeness: If one's shoulders have an easy or steep slope, then we call them easy or steep slope type. Or else, they are called standard slope type. (c) Thickness: If one's shoulders are thick or thin, then we call them thick or thin type. Otherwise, we call them standard thick type. 3. According to the frequency based on our data entries of 200 men's shoulders, we introduce five new types of men's shoulders. 76.5% of examined men's shoulders belong to one of these five types: (a) 8.0% of standard slope and back-bent type: (b) 9.5% of easy slope and standard-bent type; (c) 45.5% of standard slope and standard-bent type; (d) 5.5% of steep slope and standard-bent type; (e) 8.0% of standard slope and back-bent type. 4. The suitability of new basic bodice patterns based on the types of men's shoulders are demonstrated by the high approval rate of the subjects who participate in testing.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.851-859
• /
• 2021

The purpose of this study was to investigate the effects of six weeks of plyometric training on Sargent jumps, posture control, and lower extremity injury criterion in Taekwondo demonstrator. Twenty healthy collegiate Taekwoondo demontrators were randomly assigned to either an exercise group (Ex = 10), and a control group (Con = 10), Con maintained their normal Taekwoondo demontration training schedule. Whereas Ex group completed the plyometric program in three times a week, 60 minute for 6 weeks. Testing before and after training include the Sargent jump, back muscle strength, Y-balance and lower extremity injury criterion. There are no significant increase in back muscle strength, but significant increase in Sargent jump. In postural control, the anterior was not significant, but there was a significant increase in the left and right posterolateral, posteromedial and the total score showed that there was no risk of injuries. In conclusion, plyometric training is a training method that needs to be actively utilized for power, dynamic posture control, lower extremity injury prevention, and rehabilitation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.888-896
• /
• 2011

A white smoke hand grenade, KM8 is used to make smoke screen in order to provide visual field interceptions or signals. The grenade fails when its time to emit smoke is longer than the specified emission time so that the smoke concentration becomes lighter. This paper considered failure in smoke emission time, and evaluated its storage lifetime. The main objective of this paper is to modify the present specification limits of smoke emission time for the efficient process control in manufacturing, through analyzing effect of its specification change on the storage lifetime, based on the lifetime evaluation results. Accelerated degradation test was performed and then failure in smoke emission time was reproduced from the test. And estimated storage lifetimes from the accelerated test results was compared to evaluated lifetimes of grenades using the ASRP data. Past process testing results of the grenade in manufacturing were analyzed in this paper. Then, each storage lifetime for the specifications, ${\pm}3$ and ${\pm}5$ in seconds, extended from the current specification in manufacturing were estimated using the past testing results, and compared to one another.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.397-403
• /
• 2015

This paper proposes the development of a method for assessing the system reliability of an unmanned control robot system for an excavator. It then shows the results of the reliability qualification test based on the proposed method. The robot system functions to ensure the safety of the workers who control excavators in dangerous working environments, and the system reliability was calculated by integrating the reliabilities of the system components. Thus, test equipment for the three key units of the robot system were constructed and used in accelerated life testing. From the life testing results, guaranteed mean time between failures for the chosen confidence level was estimated, and the reliability qualification testing method of the robot system using small sample sizes was proposed.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.5
• /
• pp.539-547
• /
• 2018

Traumatic spinal cord injury (SCI) research has recently focused on the use of rat and mouse models for in vivo SCI experiments. Such small rodent SCI models are invaluable for the field, and much has been discovered about the biologic and physiologic aspects of SCI from these models. It has been difficult, however, to reproduce the efficacy of treatments found to produce neurologic benefits in rodent SCI models when these treatments are tested in human clinical trials. A large animal model may have advantages for translational research where anatomical, physiological, or genetic similarities to humans may be more relevant for pre-clinically evaluating novel therapies. Here, we review the work carried out at the University of British Columbia (UBC) on a large animal model of SCI that utilizes Yucatan miniature pigs. The UBC porcine model of SCI may be a useful intermediary in the pre-clinical testing of novel pharmacological treatments, cell-based therapies, and the "bedside back to bench" translation of human clinical observations, which require preclinical testing in an applicable animal model.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.8-14
• /
• 2007

X-ray digital tomosynthesis is widely used in the nondestructive testing and evaluation, especially for the printed circuit boards (PCBs). In this study, we propose a simple method to reduce the blur artefact, frequently claimed in the conventional digital tomosynthesis based on SAA (shift-and-add) algorithm, and thus restore the image sharpness. The proposed method is basically based on the SAA, but has a correction procedure by finding blur artefacts from the forward-and back-projection for the firstly obtained, manipulated backprojection data. The manipulation is the replacement of the original data at the POI (plane-of-interest) by zeros. This method has been compared with the conventional SAA algorithm using the experimental measurements and Monte Carlo simulation for the designed PCB phantom. The comparison showed a much enhancement of sharpness in the images obtained from the proposed method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.1
• /
• pp.45-52
• /
• 2003

A number of stress corrosion cracks in turbine rotor disk keyway in power plants have been found and the necessity has been raised to detect and evaluate the cracks prior to the catastrophic failure of turbine disk. By ultrasonic RF signal analysis and using a neural network based on bark-propagation algorithm, we tried to evaluate the location, size and orientation of cracks around keyway. Because RF signals received from each reflector have a number of peaks, they were processed to have a single peak for each reflector. Using the processed RF signals, scan data that contain the information on the position of transducer and the arrival time of reflected waves from each reflector were obtained. The time difference between each reflector and the position of transducer extracted from the scan data were then applied to the back-propagation neural network. As a result, the neural network was found useful to evaluate the location, size and orientation of cracks initiated from keyway.