• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.256-259
• /
• 2005

Analysis of behavior pattern and thermal response during bathing and showering provides important fundamental data when developing an automatic bathing/showering system. The behavior pattern and physiological changes during bathing/showering were measured und analyzed for the aged male group. We recorded the volunteers showering at front, back, left and right view using four CCTV cameras in order to study the behavior pattern during showering. The photographic data were analyzed by counting the frequencies of body contact and identifying zones where hands could reach. In order to study the thermal response, we measured the blood pressure (B.P), heart rate (H.R), body temperature (B.T.), breathing rate (B.R) for the different water temperatures and the locations of immersion for the young and old age groups. The results showed that the frequencies of body contacts were varied for different body sections. Also there were some body sections where hands could not be reached because of reduced pliability and muscular strength of the aged group. But we observed rather uniform body contact frequencies when a towel was used. In partial immersion bath experiments, we observed the changes of B.P. H.R and B.T in the case of young and old age groups, and the changes were more significant in the young age group.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.1
• /
• pp.32-40
• /
• 2020

While the utilization of wood as a raw material in related industries has been increasing with the population increasing, the availability of wood from natural forests has continued to decline. An alternative to this situation is the manufacture of particleboard from non-wood lignocellulose materials through the modification of sandwich particleboard (SPb) using bamboo strands as reinforcement. In this study, strandsof belangke bamboo (Gigantochloa pruriens W) and tali bamboo (Gigantochloa apus) were utilized. The non-wood particles included sugar palm fibers, cornstalk, and sugarcane bagasse. The board was made in a three-layer composition of the face, back, and core in a ratio of 1: 2: 1. The binder used was 8% isocyanate resin. The sheet was pressed at a temperature of 160℃ for 5 min under a pressure of 3.0 N/㎟. Testing included physical and mechanical properties based on the JIS A 5908 (2003) standard, while acoustic testing was based on ISO 11654 (1997) standards. The results showed that using bamboo strands as reinforcement has an effect on the mechanical and physical properties of SPb. Almost all the types of boards met the JIS A 5908 (2003) standards, with the exception of thickness swelling (TS) and internal bond (IB) parameters. Based on the thickness swelling parameter, the C-type board exhibited the best properties. Overall, the B-type board thatused a belangke bamboo strand for the surface and sugarcane bagasse as the core underwent the best treatment. Based on the acoustical parameter, boards using a tali bamboo strand for the surface and sugar palm fiber as the core (E-type board) exhibited good sound absorption properties.

• Journal of Korean Medical Science
• /
• v.33 no.48
• /
• pp.316.1-316.10
• /
• 2018

Background: Water pressure and muscle contraction may influence bone mineral density (BMD) in a positive way. However, divers experience weightlessness, which has a negative effect on BMD. The present study investigated BMD difference in normal controls and woman free-divers with vertebral fracture and with no fracture. Methods: Between January 2010 and December 2014, traditional woman divers (known as Haenyeo in Korean), and non-diving women were investigated. The study population was divided into osteoporotic vertebral fracture and non-fracture groups. The BMD of the lumbar spine and femoral neck was measured. The radiological parameters for global spinal sagittal balance were measured. Results: Thirty free-diving women and thirty-three non-diving women were enrolled in this study. The mean age of the divers was $72.1{\pm}4.7$ years and that of the controls was $72.7{\pm}4.0$ years (P = 0.61). There was no statistical difference in BMD between the divers and controls. In divers, cervical lordosis and pelvic tilt were significantly increased in the fracture subgroup compared to the non-fracture subgroup (P = 0.028 and P = 0.008, respectively). Sagittal vertical axis was statistically significantly correlated with cervical lordosis (Spearman's rho R = 0.41, P = 0.03), and pelvic tilt (Spearman's rho R = 0.46, P = 0.01) in divers. Conclusion: BMD did not differ significantly between divers and controls during their postmenopausal period. When osteoporotic spinal fractures develop, compensation mechanisms, such as increased cervical lordosis and pelvic tilt, was more evident in traditional woman divers. This may be due to the superior back muscle strength and spinal mobility of this group of women.

• Archives of Plastic Surgery
• /
• v.48 no.6
• /
• pp.599-606
• /
• 2021

Background Postoperative dehiscence and surgical site infection after spinal surgery can carry serious morbidity. Multidisciplinary involvement of plastic surgery is essential to minimizing morbidity and achieving definitive closure. However, a standardized approach is lacking. The aim of this study was to identify effective reconstructive interventions for the basis of an evidence-based management protocol. Methods A retrospective review was performed at a single tertiary institution for 45 patients who required 53 reconstruction procedures with plastic surgery for wounds secondary to spinal surgery from 2010 to 2019. Statistical analysis was performed for demographics, comorbidities, and treatment methods. Primary outcomes were postoperative complications, including dehiscence, seroma, and infection. The secondary outcome was time to healing. Results The overall complication rate was 32%, with dehiscence occurring in 17%, seroma in 15% and infection in 11% of cases. Median follow-up was 10 months (interquartile range, 4-23). Use of antibiotic beads did not affect rate of infection occurrence after wound closure (P=0.146). Use of incisional negative pressure wound therapy (iNPWT) was significant for reduced time to healing (P=0.001). Patients treated without iNPWT healed at median of 67.5 days while the patients who received iNPWT healed in 33 days. Demographics and comorbidities between these two groups were similar. Conclusions This data provides groundwork for an evidence-based approach to soft tissue reconstruction and management of dehiscence after spinal surgery. Timely involvement of plastic surgery in high-risk patients and utilization of evidence-based interventions such as iNPWT are essential for improving outcomes in this population.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.159-164
• /
• 2019

The front bumper of bobsleigh is mounted to alleviate the impact, but the air resistance to the bobsleigh depends on the body shape positioned in front. This study was conducted the flow analyses about three kinds of bobsleigh configurations. Models B and C with the sharp type of the front can reduce the air resistance than model A with the round type of the front. And the type that the back of the bumper narrows can generate a flow smoother than the one widening. It is thought that the results of this study can be devoted at ensuring the body design to reduce the flow resistance most at bobsleigh. As the design data with the durability of bobsleigh obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

• Journal of Climate Change Research
• /
• v.9 no.3
• /
• pp.209-221
• /
• 2018

The characteristics of heat wave events in Seoul are analyzed using weather station data from Korea Meteorological Administration (KMA) and European Centre for Medium-Range Weather Forecast (ECMWF) ERA-Interim reanalysis data from 1979 to 2016. Heat waves are defined as events in the upper 10th percentile of the daily maximum temperatures. The associated synoptic weather patterns are then classified into six clusters through Self-Organizing Map (SOM) analysis for sea-level pressure anomalies in East Asia. Cluster 1 shows an anti-cyclonic circulation and weak troughs in southeast and west of Korea, respectively. This synoptic pattern leads to southeasterly winds that advect warm and moist air to the Korean Peninsula. Both clusters 2 and 3 are associated with southerly winds formed by an anti-cyclonic circulation over the east of Korea and cyclonic circulation over the west of Korea. Cluster 4 shows a stagnant weather pattern with weak winds and strong insolation. Clusters 5 and 6 are associated with F?hn wind resulting from an anti-cyclonic circulation in the north of the Korean Peninsula. In terms of long-term variations, event frequencies of clusters 4 and 5 show increasing and decreasing trends, respectively. However, other clusters do not show any long-term trends, indicating that the mechanisms that drive heat wave events in Seoul have remained constant over the last four decades.

• Particle and aerosol research
• /
• v.15 no.1
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• Journal of Fashion Business
• /
• v.22 no.5
• /
• pp.96-112
• /
• 2018

This study developed the pants pattern, that improved appearance and gesture functions in clothes to resolve inconveniences in case of activities with being adequate in fitness of slim-fit pants for obese adolescents. The slim-fit pants pattern was developed through the fitting test after designing and making the pattern of the experimental clothing A(c/pu; 99/1%) with the primary commercial clothing as basic prototype, through the fitting test and implementation of the experimental clothing, modified and supplemented secondarily, and through the fitting test of the second experimental clothing, modified and supplemented tertiary. In terms of findings, first, as a result of analyzing the commercial slim-fit pants, it is interpreted to have projected an optical illusion, that appears to be slim due to being narrow in width of the front panel when observed from the front of the pants. Second, in the fitting test of the first experimental clothing, the prototype of commercial clothing was understood to have improved butt, crotch, waist and femoral regions. Third, pattern design of the second experimental clothing was allowed to decline abdominal pressure, in case of the sitting position, by making the crotch line in the front panel short and by handling it with a yoke belt, and was processed a difference between waist and hip circumference in the back panel, with a rubber band in the whole waist part. Fourth, in the gesture function test of the third experimental clothing, high evaluation was received in every item excluding the knee region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.88-93
• /
• 2021

SAW (Submerged Arc Welding) is often used for ship construction or welding pressure vessels and involves spraying a flux in a powder form to a welding site to a certain thickness and continuously supplying electrode wires therein. This welding method enables high current welding up to 1,500 to 3,000 A. Arc efficiency is higher than 95% and the technique allows clean work as it creates less welding fume, which is composed of fine metal oxide particles, and the arc beam is not exposed. In this study, SM490C-TMC thick plates were heterogeneously welded by SAW. Mechanical properties of welds were measured, and welds were assessed macroscopically and for adhering magnetic particles. The following conclusions were drawn. Bending tests showed no spots exploded on sample surfaces or any other defect, and plastic deformation testing confirmed sufficient weld toughness. These results showed the 1F welding method has no shortcomings in terms of bending performance.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.8
• /
• pp.113-125
• /
• 2021

This study aimed to develop a new Hanbok Jeogori prototype based on design extracted through a preference survey on new Hanbok Jeogori. This study was conducted based on K-patterns selected as excellent patterns in prior research and utilized the SPSS 27.0 program for analysis of appearance evaluation. As a result of the first appearance evaluation and garment pressure evaluation, the shoulder area was required to be modified, so the shoulder end point was moved within 1cm to rearrange the armhole line. Modification of sleeve length and circumference was also required, reducing sleeve length by 1.5cm and sleeve circumference by 0.5cm at both ends. As a result of the second evaluation, the length of Jeogori, hem circumference, and sleeve length were required, reducing the length of the front and back Jeogori by 1 cm and reducing the sleeve length by 1cm. The hem circumference was reduced by 0.2cm each in the princess line, which was highly evaluated in the final evaluation. In future research, it is thought that pattern studies by material, length, and age should be conducted and corrections should be derived through actual wear experiments.