• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.68-71
• /
• 2006

Multi-component $ZnO-In_2O_3-SnO_2$ thin films have been prepared by RF magnetron co-sputtering using targets composed of $In_3Sn_4O_{12}$(99.99%) [1] and ZnO(99.99%) at room temperature. $In_3Sn_4O_{12}$ contains less In than commercial ITO, so that it lowers cost. Working pressure was held at 3 mtorr flowing Ar gas 20 sccm and sputtering time was 30 min. RF power ratio [RF1 / (RFI + RF2)] of two guns in sputtering system was varied from 0 to 1. Each RF power was varied $0{\sim}100W$ respectively. The thickness of the films was $350{\sim}650nm$. The composit ion concentrations of the each film were measured with EPMA, AES and XPS. The low resistivity of $1-2\;{\times}\;10^3$ and an average transmittance above 80% in the visible range were attained for the films over a range of ${\delta}\;(0.3\;{\leq}\;{\delta}\;{\leq}\;0.5)$. The films also showed a high chemical stability with time and a good uniformity.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.872-882
• /
• 2017

The objective of this study was to evaluate the properties of bamboo oriented strand board (B-OSB) from andong (Gigantochloa psedoarundinacea) and betung (Dendrocalamus asper) with and without steam treatment. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure. The extractive content of bamboo strands before and after steam treatment were determined according to a standard (TAPPI T 204 om-88). Three-layer B-OSB with the core layer perpendicular to the surface and back layers were formed and binded with 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of the boards were conducted in accordance with the JIS A 5908:2003 standard. The results showed that steam treatment of bamboo strands significantly reduced the extractive content. Steam treatment tended to increase the dimensional stability and mechanical properties of B-OSB from andong and betung. The results showed that the dimensional stability and bending strength of B-OSB from betung was higher than those of andong. The internal bond strength of B-OSB from andong was higher than betung owing to a greater amount of extractives dissolved during the steam treatment.

• 가정과삶의질연구
• /
• 제22권4호
• /
• pp.43-61
• /
• 2004

The purpose of this study was to verify the usefulness of kinetic House- Tree- Person drawing as a diagnostic measure for the degree of self-differentiation, which is an essential part of college students' development. Participants for the study were four hundred thirty five(272 male and 163 female) university freshmen enrolled in 4-year colleges located in Pusan. The Participants completed a scale of self-differentiation and a Kinetic House- Tree-Person drawings test. The evaluation system for kinetic House-Tree-Person drawings was established based on the indexes of Buck(1948) and Bums(1972) and used exiting literatures as reference. The data were analyzed using means, standard deviations, t-test, one-way ANOVA, and Scheffe's test. The results obtained from the study are as follows: First, the mean level of college students' self-differentiation was 2.81, which is about average. Some significant gender differences were found in the areas of self-intergration, family projection, and emotional separation. Male students scored higher on self-intergration, whereas female students score higher on family projection and emotional separation. Second. self-differentiation was higher when the student drew a house with smoke coming out of the chimney, a single-story house with flat roof, or with detailed description of curtains, roof and roof tiles. Third, self-differentiation seemed to be higher when branches and fruits were included, when there was no expression of roots, when large crowns and branch openings were presented, and when no slant lines or base lines appeared. Forth, self-differentiation showed ㅁ higher level when the portrait shows eyes, mouth and neck without omission, when it included the whole body instead of face only, and when there was no person with just a profile, a back, or with a stiff posture, and when there was no weak and thin lines. Individuality also marked higher if a person was in motion and than one person was added. Finally, self-differentiation showed significant difference according to the overall harmony of the drawing, ordering of contents, hand pressure, the kind and shape of tree, and presence of other persons. The more harmonious the picture was, and the more family members are added, the higher the level of self-differentiation was.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.661-664
• /
• 2008

해양환경과 같이 특수한 환경에 위치한 구조물은 해수 및 염해 등에 의해 물리적 화학적 침식을받아 철근부식과 그 팽창압으로 인해 콘크리트 구조물의 성능저하가 가속화되고 있으며, 이러한 성능저하로 인해 콘크리트 구조물은 균열 박리되어 내구성이 현저히 저하된다. 이러한 염해대책으로는 염해침투를 억제하는 혼합시멘트를 사용하거나, 수화과정에서 염화물을 화학적으로 고정화 시키는 등의연구가 활발히 진행되고 있다. 따라서 본 연구에서는 고강도 혼합재가 첨가된 해양콘크리트의 특성을 검토하기 위하여 저발열 혼합시멘트에 고강도 혼합재(오메가2000)를 0, 5, 10, 15% 치환 첨가하여 해양콘크리트를 제조하였다. 제조한 해양콘크리트의 재령별 압축강도는 증가하는 경향을 나타내었으며, 재령에 따른 염소이온 침투저항성은 향상되는 것으로 나타났다.

• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.1008-1013
• /
• 2009

본 논문에서는 피실험자의 체온, 맥박, 호흡수, 혈압을 수집할 수 있는 무선 센서를 이용하여 수집된 생체 신호를 분석하는 시스템을 제안하였으며, 생체 신호를 분석하기 위하여 전문가 시스템을 사용하여 역전파 신경망을 설계 하였다. 제안된 시스템은 하드웨어 (UStar-2400 ISP, UStar-2400, Wireless sensors) 부분과 소프트웨어 부분 (Knowledge Base module, Inference Engine module, User Interface module)으로 구성되며 소프트웨어 부분은 HOST PC에 삽입된다. 그리고 시스템의 정확도를 개선하기 위하여 전방향 에러 정정 시스템(LDPC)을 구현하였다. 지식기반 모듈에서 100개의 데이터 집합을 사용하여 역전파 신경망을 훈련하였으며, 지식기반 모듈의 128개의 데이터 집합을 사용하여 실험한 결과 약 95%의 정확도를 가졌으며, 무선 센서를 사용하여 13명의 학생을 대상으로 실험한 결과 약 85%의 정확도를 획득하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.414-423
• /
• 2006

Many construction projects adopt grouting technology to prevent the leakage of groundwater or to improve the shear strength of the ground. Recognition as a feasible field procedure dates back to 1925, Since then, developments and field use have increased rapidly. According to improvement of grout materials, theoretical study on grout penetration characteristics is demanded. Fluid of grout always tends to flow from higher hydraulic potential to lower and the motion of grout is also a function of formation permeability. Viscosity of grout is changed by chemical action while grout moves through pores. Due to the increment of viscosity, permeability is decreased. Permeability is also reduced by grout particle deposits to the soil aggregates. In this thesis, characteristics of new cement grout material that is developed recently is studied: injectable volume of new grout material is tested in two different sizes of sands, and the method to calculate injectable volume of grout is suggested with consideration of change in viscosity and clogging phenomena. The calculated values are compared with injection test results. Viscosity of new grout material is found to be an exponential function of time. And lumped parameter $\theta$ of new grout material to be used for assessing deposition characteristics is estimated by comparing deposit theory with injection test results considering different soil types and different injection pressure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.154-161
• /
• 2004

The flat dilatometer test(DMT) is a geotechnical tool to estimate in-situ properties of various types of ground materials. The undrained shear strength is known to be the most reliable and useful parameter obtained by DMT. However, the existing relationships which were established for other local deposits depend on the regional geotechnical characteristics. In addition, the flat dilatometer test results have been interpreted using three intermediate indicesmaterial index($I_p$), horizontal stres index($K_p$), and dilatometer modulus($E_p$) and the undrained shear strength is estimated only by using the horizontal stress index($K_D$). In this paper, an artificial neural network was developed to evaluate the undrained shear strength by DMT and the ANN, based on the $p_0,\;p_1,\;p_2,\;{\sigma}'_v_0$, and porewater pressure. The ANN which adopts the back-propagation algorithm was trained based on the DMT data obtained from Korean soft clay. To investigate the feasibility of ANN model, the prediction results obtained from data which were not used to train the ANN and those obtained from existing relationships were compared.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.121-128
• /
• 2016

Purpose: The vacuum glazing should constantly retain the gap in vacuum state to maintain high thermal performance. To do so, pillars are used to prevent the glazing from clinging to each other by the atmospheric pressure and therefore surface of the vacuum glazing is consistently affected by residual stress. The vacuum glazing could be applied to curtain wall systems at spandrel area to fulfill a rigorous domestic standard on U-value of the external wall. However, this can lead to high glazing temperature increase by heat concentration at a back panel and finally thermal stress breakage. This study experimentally determined weakness of the vacuum glazing systems on the thermal stress breakage and investigated effect of the residual stress. Method: The experiment first built two scale-down mock-up facilities that replicate the spandrel area in curtain wall, and then installed single low-e glass and vacuum glazing respectively. The two mock-up facilities were exposed to outside to induce the thermal stress breakage. Result: The experiment showed that the temperature occurred the thermal stress breakage was $114.4^{\circ}C$ for the single low-e glass and $118.9^{\circ}C$ for the vacuum glazing respectively. The result also showed the vacuum glazing reached the critical point earlier than the single low-e glass, which means that the vacuum glazing has high potential to occur the thermal shock breakage. In addition, the small temperature difference between two glazing indicates that the residual stress scarcely affects breakage of the vacuum glazing.

• 대한인간공학회지
• /
• 제29권3호
• /
• pp.347-356
• /
• 2010

The purpose of this study is to analyze the spine stability by comparing muscle activation in various scaffold working conditions. The independent working conditions were designed by two levels of working height, existence and absence of safety handrail, and the two levels of expertise. The corresponding activities of the agonist and antagonist muscles of spine were simultaneously recorded by using EMG. As results, novice worker showed increased muscle activity while doing the task on the 2nd floor, absence of handrail. And expert showed the increase of co-contraction while working on the 2nd floor without handrail. Such co-contraction was found to increase the spine stability when the working condition become risky. On the other hand, the co-contraction was prolonged, the spine muscle fatique and disc pressure could be increased, which would increase the risk of musculo-skeletal disorder. The results of co-contraction in this study indicates that the motor control system responds to maintain the stability of the spine particularly when workers cognitively recognize the danger of falling or imbalance. This study also quantitatively accounted for the biomechanical cause of LBP among workers who has to prevent themselves from falling. Therefore, if can be said that safe environment preventing falling can also prevent workers from MSDs as well. Such knowledge can be applied to design ergonomic workplace environment as well as movable scaffold.

• 임상간호연구
• /
• 제21권2호
• /
• pp.215-222
• /
• 2015

Purpose: For hemodialysis, a vascular access which can maintain a certain speed for a long time is required. The prevention of the vascular access dysfunction is very important to decrease morbidity and to improvethe quality of life of patients receiving hemodialysis It is reported that far infrared heat increases the blood flow by expanding capillaries and micro-arteriovenouses. This study aimed to evaluate the effect of far infrared heat therapy as a new nursing intervention for maintaining vascular access function and improving the blood flow of patients receiving hemodialysis. Methods: The quasi-experimental research of nonequivalent control group pre-post test design was carried out for 59 patients receiving hemodialysis 3 times per week at K medical center. A far infrared heat was applied to the experimental group for 3 months. Results: The arteriovenous fistula blood flow of the experimental group (far infrared heat therapy group) increased significantly when compared to the control group (p=.047). However, static intra-access pressure ratio(SIAPR)was not different statistically (p=.101). Conclusion: The far infrared therapy could be considered as nursing intervention of choice as it demonstrated increase in the arteriovenous fistula blood flow in the patients receiving hemodialysis.