• 한국연소학회지
• /
• 제4권1호
• /
• pp.117-129
• /
• 1999

A method for the mixing augmentation of the transverse injection of fuel in a Scramjet combustor is suggested. Based on the fact that the main factor controlling the mixing characteristics in transverse injection is the effective back-pressure (the pressure around the injection hole) it is tried to make a flow expansion near the injection port in order to reduce effective back-pressure. A three dimensional Navier-Stokes code adopting the upwind method of Roe#s flux difference splitting scheme is used. The k-w SST turbulence model turbulence model is used to calculate the turbulent viscosity. It is shown that the reducing of the effective back-pressure make it possible to increase the penetration distance and to increase the mixing rate without excessive losses of stagnation pressure. Also, it is shown that the streamwise vorticity generated by baroclinic torque has great influences on the mixing process.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.52-58
• /
• 2005

국내 정수장의 약품공정을 향상시켜 저비용 고효율의 정수처리 공정을 확립할 목적으로 약품 분사용 초음파 분사 노즐의 적용가능성을 평가하였다. 초음파 분사노즐은 압전세라믹스를 이용하여 제작하였으며, 이 장치를 사용하여 상수 원수를 처리한 결과와 현재 대부분의 정수장에서 사용되고 있는 기존의 약품 혼화방식에 의한 오염물질의 처리효율을 비교 평가하였다. 그 결과 혼화방식에 따른 혼화지 내 응집제 혼화특성은 초음파 노즐에 의한 혼화방식이 기계식(back-mixing) 혼화방식보다 응집제의 확산속도가 빠른 것으로 조사되었다. 오염물질 별 제거효율 역시 기계식(back-mixing) 혼화방식보다 초음파 노즐에 의한 혼화방식의 제거효율이 높은 것으로 조사되어, 초음파 분사노즐을 이용한 약품 혼화방식을 실제 정수처리 공정에 적용할 경우 응집제의 과량 주입에 의한 처리효율의 저하를 방지할 수 있고, 후속 공정에 대한 부하량을 줄임으로서, 정수공정에 사용되는 약품을 절감시키고, 혼화지가 필요없게 되어 이로 인한 경제적 효과 뿐만 아니라 보다 순도가 높은 음용수를 생산 할 수 있을 것으로 기대된다.

• Asian Journal of Atmospheric Environment
• /
• 제5권1호
• /
• pp.47-55
• /
• 2011

Variations in ambient atmospheric carbon monoxide(CO) observed at an inland mining site in the Indo-Gangetic plains, Jaduguda ($22^{\circ}38'N$, $86^{\circ}21'E$, 122m MSL, ~75 km away from the coast of the Bay of Bengal) during the Tsunami of 26 December 2004 were monitored. CO mixing ratio over this site was measured using a non-dispersive infrared analyzer (Monitor Europe Model 9830 B). Back trajectory analysis data obtained using NOAA Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) Model was also used for this study. Variations in CO mixing ratio at a coastal site, Thiruvananthapuram ($8^{\circ}29'N$, $76^{\circ}57'E$, located ~2 km from the Arabian Sea coast) have also been investigated using CO data retrieved from the Measurement Of Pollution In The Troposphere (MOPITT) instrument. Ground-based measurements indicated abnormal variations in CO mixing ratio at Jaduguda from 25 December 2004 evening (previous day of the Tsunami). MOPITT CO data showed an enhancement in CO mixing ratio over Thiruvananthapuram on the Tsunami day. Back trajectory analyses over Thiruvananthapuram and Jaduguda for a period of 10 days from $21^{st}$ to $30^{th}$ December 2004 depicted that there were unusual vertical movements of air from high altitudes from 25 December 2004 evening. CO as well as the back trajectory analyses data showed that the variations in the wind regimes and consequently wind driven transport are the most probable reasons for the enhancement in CO observed at Jaduguda and Thiruvananthapuram during the Tsunami.

• 한국산학기술학회논문지
• /
• 제14권1호
• /
• pp.485-492
• /
• 2013

일반과 변형구조의 싸이클론에서 입자흐름의 체류시간분포 특성을 통해 선회강도, 난류성 에디, 벽면 바운싱에 의한 고체흐름의 역혼합과 2단 선회류 약화기의 직경이 집진효율에 미치는 영향을 고찰하였다. 변형구조 싸이클론(S = 13, 15cm)에서 플라이애쉬의 집진효율이 일반 싸이클론보다 높게 나타났다. 변형구조의 싸이클론에서 집진효율은 2단 선회류 약화기의 직경(S)이 13cm에서 가장 높게 나타내었다. 글라스비드의 체류시간분포에 대한 분산과 평균 체류시간은 선회강도와 난류성 에디로 인해서 2단 선회류 약화기의 직경이 증가할수록 증가하였다. 변형구조의 싸이클론에서 고체 흐름의 역혼합은 기체 유입속도가 증가할수록 증가하였고 일반 싸이클론보다 높게 나타났다.

• 한국환경과학회지
• /
• 제6권6호
• /
• pp.579-588
• /
• 1997

In order to see the stratification related to the heat flux In Deukryang Bay, the oceanographic data on July 12, 1994 and the meteorological data of Kohung and Kwangju meteorological stations were analysed. The temperature durerences between the sea surface and the near bottom were 1~3 ton spring tide (July 12, 1994) In Deukryang Bay. The temperature anomalies were high about 3t during summer In 1994. These mean that the non mixing was not effective In destroying the stratification due to the sea surface heating by the solar radition, even though it was on spring tide. The maximum solar radiation was about 600 ly/day, which was the value of the same date of oceanographic observation. The sensible and the latent heat flux which are 0~100 ly/day were not so varied during summer. The absorbed heat flux through the sea surface was mostly lost by the back radiation. which ranges are about 0~-400 ly/day. The dimensionless mixing parameter related to the buoyancy flux was 5~150$\times$$10^{-5}$. The efficiency of tidal mixing to destroy the stratecation was 0.4~0.6%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.155-158
• /
• 2002

In general, TVC(Thermal Vapor Compressor) is used to boost/compress a low pressure vapor to a higher pressure for further utilization. The one-dimensional method is simple and reasonably accurate, but cannot realize the detail as like the back flow and recirculation in the mixing chamber, viscous shear effect, and etc. In this study, the axisymmetric How simulations have been performed to reveal the detailed flow characteristics for the various ejector shapes. The Navier-Stokes and energy equations are solved together with the continuity equation In the compressible flow fields. The standard $k-{\epsilon}$ model is selected for the turbulence modeling. The commercial computational fluid dynamic code FLUENT software is used for the simulation. The results contain the entrainment ratio under the various motive, suction and discharge pressure conditions. The numerical results are compared with the experimental data, and the comparison shows the good agreement. The three different flow regimes (double chocking, single chocking and back flow) have been clearly distinguished according to each boundary pressure values. Also the effects of the various shape variables (nozzle position, nozzle outlet diameter, mixing tube diameter, mixing tube converging angle, and etc.) are quantitatively discussed.

• 대한기계학회논문집B
• /
• 제29권8호
• /
• pp.934-939
• /
• 2005

Starting pressure of a supersonic ejector with a second-throat was investigated. In case of mixing chamber length longer than a critical length, starting pressure is in proportion to length of the mixing chamber. In this study, we assumed that the ejector starts when the primary supersonic flow reaches inlet of the second-throat and the distance of the supersonic flow traveling can be expressed by multiplying an empirical factor to the first diamond shock length of overexpanded flow. To calculate the overexpanded supersonic flow, a mixing model was employed to compute secondary flow pressure and the result was applied to back pressure condition of overexpanded flow calculation. In the result, for three cases of primary nozzle area ratio, we could get accurate model of predicting the starting pressure by selecting a suitable empirical factors around 3.

• 상하수도학회지
• /
• 제21권2호
• /
• pp.243-252
• /
• 2007

Effects of alum dosage on the particle growth were investigated by monitoring particle counts in a rapid mixing process. Kaolin was used for turbid water sample and several other chemicals were added to adjust pH and ionic strength. The range of velocity gradient and mixing time applied for rapid mixing were $200{\sim}300sec^{-1}$ and 30~180 sec, respectively. Particle distribution in the synthetic water sample was close to the natural water where their turbidity was same. The number of particles in the range of $10.0{\sim}12.0{\mu}m$ increased rapidly with rapid mixing time at alum dose of 20mg/L, however, the number of $8.0{\sim}9.0{\mu}m$ particles increased at alum dose of 50mg/L. The number of $14.0{\sim}25.0{\mu}m$ particles at alum dose of 20mg/L was 10 times higher than them at alum dose of 50mg/L. Dominant particle growth was monitored at the lower alum dose than the optimum dose from a jar test at an extended rapid mixing time(about 120 sec). The number of $8.0{\sim}14.0{\mu}m$ particles was lower both at a higher alum doses and higher G values. At G value of $200sec^{-1}$ and at alum dose of 10-20mg/L, residual turbidity was lower as the mixing time increased. But at alum dose above 40mg/L and at same G value, lower residual turbidity occurred in a short rapid mixing time. Low residual turbidity at G value of $300sec^{-1}$ occurred both at lower alum doses and at shorter mixing time comparing to the results at G value of $200sec^{-1}$.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.459-469
• /
• 2009

It is well known that coagulation pretreatment can reduce foulants prior to membrane filtration. The purpose of this research was to investigate the effects of coagulation on fouling of ceramic microfiltration membrane($0.1 {\mu}m$) using pilot plant of $150m^3/day/train$ capacity. Train A membrane system has pretreatment process of ozonation and coagulation while train B has only coagulation. Two types of coagulation operation were investigated: back mixer(rapid mixing with or without slow mixing) which is a conventional mechanically stirred mixer and an inline static mixer. Ozone dose rate for train A was 1 mg/L and ozone contact time was 12 min. The coagulation dose(PACl 10% as $Al_2O_3$) rate was changed 20~40 mg/L according to experimental schedule. In this experimental conditions, the coagulation of back mixer type with rapid mixing(GT=72,000) and slow mixing(GT=45,000) was the best effective in reduction of ceramic membrane fouling regardless preozonation. Especially, the effect of inline static mixer was sensitive to change in water quality. Ozonation mainly affected irreversible fouling rather than reversible fouling in accordance with less adsorption of NOM on the membrane surface. Thus, the increase rate of the nomalized TMP(trans membrane pressure) at $25^{\circ}C$ for train A was relatively lower than that of train B under same coagulation process with same coagulant dosage. The best performance of ceramic membrane appeared in case of combined process with ozonation, therefore this integrated process is able to archive less coagulant dosing and secure a stability of ceramic membrane system.

• 한국실내디자인학회논문집
• /
• 제41호
• /
• pp.206-214
• /
• 2003

The purpose of this study was to investigate the antique chair style in Korean market. The examined objects were 235 chairs in selected 30 antique shops dealing with curios in Seoul from July 16 to August 23 in 2002. The results of this study was as follows Antique chairs in Korean market are revival style and eclectic style. The revival style are copied or transformed period style antique chairs. The eclectic style are chairs newly designed by mixing of 2 or 3 different types period style antique-chairs. Rococo-revival style were the most prevalent following Renaissance style chairs in the market. In case of chair back and legs the Classic revival style are made by copying and transforming the Klismos, Hepplewhite, Sheraton, which is a neo-classic style. The Gothic revival style are copied or transformed finial, foil, crocket and tracery which is the Gothic architectural decoration. In Renaissance revival style. Elizabeth, slat, caned, padded, yorkshire, bobbin turned, William & Mary are copied and transformed for the chair back. In Rococo-revival style, LouisXV, Queen Anne, Chippendale of Rococo-style- chair back and cabriole legs are copied or transformed. In the eclectic style, Classic style chair back with Renaissance-style legs or Rococo style chair back with Renaissance style legs are combined as a periodical eclectic style. In this manner now style of chair back and the periodical style of legs were used together as a new eclectic style chair.