• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.115-126
• /
• 2019

The long-term settlement characteristics for the cast-in-place bored pile in the deep-thick soft soil are investigated by post-grouting field tests. Six cast-in-place bored engineering piles and three cast-in-place bored test piles are installed to study the long-term settlement characteristics. Three post-grouting methods (i.e., post-tip-grouting, post-side-grouting, and tip and side post-grouting) are designed and carried out by field tests. Results of the local test show that decreased settlements for the post-side-grouted pile, the post-tip-grouted pile and the tip and side post-grouted pile are 22.2%~25.8%, 30.10%~35.98% and 32.40%~35.50%, respectively, compared with non-grouted piles. The side friction resistance for non-grouted piles, post-side-grouted pile, post-tip-grouted pile and the tip and side post-grouted pile undertakes 89.6~91.3%, 94.6%, 92.4%~93.0%, 95.7% of the total loading, respectively. At last, the parameters back analysis method and numerical calculation are adopted to predict the long-term settlement characteristics of the cast-in-place bored pile in the deep-thick soft soil. Determined Bulk modulus (K) and a creep parameter (Ks) are used for the back analysis of the long-term settlement of the post-grouted pile. The settlement difference between the back analysis and the measurement data is about 1.11%-7.41%. Long-term settlement of the post-grouted piles are predicted by the back analysis method, and the predicted results show that the settlement of the post-grouted pile are less than 6 mm and will be stable in 30 days.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.199-208
• /
• 1993

Using several soil parameters which are obtained from the PI-experimental formulas and the back analysis method, the elastic analysis, the elasto-plastic analysis and the elasto-viscoplastic analysis for soil deformation are executed. Comparing the results with those of consolidation test, the indirect estimation method for soil parameters and the suitability of constitutive models are studied. The elastic analysis using back analysis result and the elasto-plastic analysis using the perconsolidation test. The elasto-viscoplastic analysis disagrees with the results of meability coefficient obtained from back analysis are the nearest to the results of the consolidation test. It is inferred that elasto-viscoplastic model is not adequate to the soil of which plasticity index is low.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.503-504
• /
• 2015

This paper deals with the analysis of characteristics of position and speed estimator of an adaptive sensorless control algorithm for PMSM drives. The analysis shows that the back emf constant variation results in the position estimation error, but does not the speed estimation error. The simulation and experimental results are shown to verify the analysis result and the usefulness of the back emf constant estimator.

• Journal of Biomedical Engineering Research
• /
• v.43 no.1
• /
• pp.52-60
• /
• 2022

Purpose: For now, cognitive load is assessed based on survey-based methods, which can be difficult to track the amount of cognitive load in real-time. In this study, we investigated the difference in electrophysiological activation due to different levels of cognitive load not only at sensor-level but also at source-level using electroencephalogram that might be potentially used for quantitative cognitive load evaluation. Materials and Methods: In this study, ten healthy subjects (mean age 24.3 ± 2.1, three female) participated the experiment. All participants performed 4 sessions of n-back task in different difficulties: 0-, 1-, 2-, and 3-back during electroencephalogram recording. For sensor-level analysis, we calculated the event-related potential and event-related spectral perturbation while low resolution brain electromagnetic tomography (LORETA) to estimate the source activation. Each result was compared between different workload conditions using statistical analysis. Results: Statistical results revealed that the accuracy of the task performance was significantly different between different cognitive loads (p = 0.018). The post-hoc analysis confirmed that the accuracy of the 3-back task was significantly decreased compared to 1-back condition (p = 0.018), but not with 2-back condition (p = 0.180). ERP results showed that P300 target amplitude between 1-back and 3-back had a marginal difference in Cz (p = 0.059) and Pz(p = 0.093). A significant inhibition in Cz high-beta activation (p = 0.017) and decrease in source activation of right parahippocampal gyrus was found in 3-back condition compared to 1-back condition (p < 0.05). Conclusion: In this study, we compared the sensor- and source-level differences in electroencephalogram between different levels of cognitive load, that were found to be in line with the previous reports related to cognitive load evaluation. We expect that the outcome of the current study can be used as a feature to establish a quantitative cognitive load assessment system.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.7
• /
• pp.5-14
• /
• 2010

The paper processed settlement analysis using Finite Elements Method(FEM). Because Stress Distribution Ratio has to be decreased, for settlement analysis of soft clay deposit improved by sand compaction piles(SCP). Back analysis was processed comparing the measured settlements of laboratory model tests and finite element analysis where the SCP treated area was assumed as mixed ground with clay deposit rather than being a composite ground. The paper proposes a methodology which employs a compression index($C_c$) for settlement analysis of soft clay deposit improved by sand compaction piles from the back analysis. This approach is applied to a field measurement case(A revetment founded on the SCP improved clay deposit with the replacement ratio of 45%).

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.792-795
• /
• 1996

In TIG welding of pipe, back bead size monitoring is important for weld quality assurance. Many researches have been performed on estimation of the back bead size by heat conduction analysis. However numerical conduction model based on many uncertain thermal parameters causes remarkable errors and thermomechanical phenomena in molten pool can not be considered. In this paper, filler wire feeding force in addition to weld current, wire feedrate, torch travel speed and orbital position angle is monitored to estimate back bead size in orbital TIG welding. Monitored welding process variables are fed into an artificial neural network estimator which has been trained with the monitored process variables (input patterns) and actual back bead size (output patterns). Experimental verification of the proposed estimation method was performed. The predicted results are in a good agreement with the actual back bead shape. The results are quite promising in that estimation of invisible back bead shape can be achieved by analyzing the welding parameters without any conventional NDT of welds.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.17-28
• /
• 1999

This study was to analyze factors of the body form and factors of bodice pattern through a surface developement figure for the tight bodice pattern design. Fifty replicas of the trunk surface were made by applying a surgical tape method of female subjects between 18 and 24 years old. The result was as follows: 1. The gaps between direct measurements and measurements of the surface development figure were regarded as allowances for the tight bodice pattern. 2. There are four factors of body form selected by factor analysis. The 1st factor signifies th degree of fatness in the upper body. The 2nd factor signifies the length of the upper body. The 3rd factor signifies the part of the front shoulder. The 4th factor signifies the part of the neck. 3. There are high correlations between center back line of the surface development figure and back length line side line front length line back neck depth back upper chest depth. There are high correlations between back bust line of the surface development figure and back interscye breadth line back upper chest line back armhole line. There are high correlations between front bust line of the surface development figure and front upper chest line front interscye breadth line front armhole line front neck breadth 4. The regression expressions of measurements of the surface development figure of the upper body were analyzed as(Fig. 3).

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.144-148
• /
• 2014

The purpose of this research is to utilizing the Tetrax$^{(R)}$ balance measuring instrument in order to analyze the postural balance of males and females in their 30 s diagnosed with chronic lower back pain who have followed a 12-week rehabilitation exercise program. The research also examines the effects on any change in back pain level. In terms of the variables in this research, postural balance (left/right, front/back, postural balance) and pain level change (0~100 mm) were measured. Pre-/post-experimental differences were assessed using the paired-t test. In addition, to identify any gender gap, we set the preliminary scores as a covariate and ran the Analysis of Covariance. Statistical significance (a) herein was set at 0.05. As a result of this research experiment, the left/right, front/back, and overall postural balance were found to increase in both the male and female cases, but with no statistical significance or gender gap. However, both males and females showed a significant decrease in their back pain levels. These findings demonstrate the necessity of continuing clinical research based on the Tetrax$^{(R)}$ equipment for scientific evaluation of the effects of rehabilitation exercises on chronic lower back pain patients and their balancing ability.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.837-842
• /
• 2000

In the coiling process of helical steam generator tubes of integral reactor SMART, a considerable amount of spring back, which induces dimensional inaccuracy and difficulty in fabrication, has been arised. In this research, an analytical model was derived to evaluate the amount of the spring back for steam generator tubes. The model was developed on the basis of beam theory and elastic-perfectly plastic material property. This model was extended to consider the effect of plastic hardening and the effect of the tensile force on the spring back phenomena. Parametric studies were performed for various design variables of steam generator tubes in order to minimize the spring back in the design stage. A sensitivity analysis has shown that the low yield strength, the high elastic modulus, the small helix diameter, and the large tube diameter result in a small amount of the spring back. The amount of the spring back can be controlled by the selection of adequate design values in the basic design stage and reduced to an allowable limit by the application of the tensile force to the tube during the coiling process.

• Journal of muscle and joint health
• /
• v.21 no.3
• /
• pp.165-172
• /
• 2014

Purpose: The purpose of this study was to identify effects of postural habits and stress on low back pain experienced by nursing students. Methods: The survey was conducted with 282 students at 5 nursing schools in Seoul, Incheon, Chungcheongbuk, and Jeollabuk Province. Data were collected from October, 2013 to January, 2014. Data analyses including descriptive analysis, ANOVA, Pearson's correlation coefficient, Spearman's rank correlation coefficients, and multiple regression were performed using SPSS 21.0. Results: In multiple regression, habit of standing on force of one feet (${\beta}=.23$, p<.001), habit of sleeping on one's back (${\beta}=-.19$, p=.020), habit of resting the chin on one's hands (${\beta}=.15$, p=.029), and habit of carrying a bag on one shoulder (${\beta}=.12$, p=.011) were associated with low back pain experienced by nursing students. These factors accounted for 12.9% of the variance in the low back pain in undergraduate students. Conclusion: These results suggest that low back pain in nursing students are related to their habits of posture in daily life. Therefore, intervention program to encourage healthy postural habits can be effective to prevent low back pain in nursing students.