• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.400-405
• /
• 2010

This paper deals with implementation of intelligent head up display for vehicle safety system. The Implanted new intelligent transport system offer the potential for improved vehicle to driver communication. The most commonly viewed information in a vehicle is from the Head up display, where speed, tachometer, engine RPM, navigation, engine temperature, fuel gauge, turn indicators and warning lights provide the driver with an array of fundamental information. TFT LCD, LCD Back light led, plane mirror, lens and controllers parts were designed to head up display system. Finally, In this paper, we analyze intelligent head up display system for vehicle of driver safety.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.62-70
• /
• 2007

In this paper, the boost Power Factor Correction(PFC) technique for Direct Torque Control(DTC) of brushless DC motor drive in the constant torque region is implemented on a TMS320F2812DSP. Unlike conventional six-step PWM current control, by properly selecting the inverter voltage space vectors of the two-phase conduction mode from a simple look-up table at a predefined sampling time, the desired quasi-square wave current is obtained, therefore a much faster torque response is achieved compared to conventional current control. Furthermore, to eliminate the low-frequency torque oscillations caused by the non-ideal trapezoidal shape of the actual back-EMF waveform of the BLDC motor, a pre-stored back-EMF versus position look-up table is designed. The duty cycle of the boost converter is determined by a control algorithm based on the input voltage, output voltage which is the dc-link of the BLDC motor drive, and inductor current using average current control method with input voltage feed-forward compensation during each sampling period of the drive system. With the emergence of high-speed digital signal processors(DSPs), both PFC and simple DTC algorithms can be executed during a single sampling period of the BLDC motor drive. In the proposed method, since no PWM algorithm is required for DTC or BLDC motor drive, only one PWM output for the boost converter with 80 kHz switching frequency is used in a TMS320F2812 DSP. The validity and effectiveness of the proposed DTC of BLDC motor drive scheme with PFC are verified through the experimental results. The test results verify that the proposed PFC for DTC of BLDC motor drive improves power factor considerably from 0.77 to as close as 0.9997 with and without load conditions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1283-1290
• /
• 2005

A thixotropic grout has been newly developed for the use of back-filling a tail void in the shield tunnel and filling up ground voids. The grout developed in the study is a mixture of colloidal silica, cement and some functional additives. Its engineering characteristics was investigated by measuring a viscosity and unconfined compressive strengths. The optimum mixing proportion for an effective thixotropic grout was proposed through several repeated laboratory tests. The various physical properties such as thixotropy, unconfined compressive strengths, and durability of the thixotropic grout and the gels produced from the grout were compared with those of the well-known waterglass grout such as L.W.. The thixotropic grout developed in the study exhibited an excellent performance for back-filling of tail voids, based on experimental results compared to the existing waterglass grout.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.117-129
• /
• 1999

Hudan Bangryung-Banbee was the name for a traditional dress which had a square neckline collar. Among Bangryung-Banbee, there was a particular style which, plus with the square neckline collar, had the half-length sleeve, bodice whose back length was shorter than the front. This kind of style shown a big difference from the typical pattern of traditional Korean costumes which had the V neck and had to fold the neckband of the clothes in Y-shape. This study focused on the analysis of the change of Hudan(後短) Bangryung-Banbee style. Bangryung-Banbee of the half sleeve/shortened back style had been usually excavated around the period of the Japanese invasion of Chosun dynasty(1592-1598). And up to now this kind of the costumes was never found before the fifteenth century or after the eighteenth century in Korea. Therefore it is thought that Bangryung-Banbee was worn widely in the middle of the Chosun dynasty. However, the shape of the collar and the length of sleeve and of dress were variously used, so it must be recognized that there existed much more diverse styles of Bangryung-Banbee than it was known today. But as the times passed away, the lined Bangryung-Banbee disappeared, and the collar of Bangryung-Banbee changed from square neckline to rounded Wonsam(圓衫) or Baeja(背子)-shape. And in the case of Bangryung-Banbee's front length, the original style disappeared, while a new style of longer back appeared.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1605-1609
• /
• 2007

In the case of Linear induction motor(LIM), numerical analysis method like Finite Element Method(FEM) has been mainly used to analyze the travelling magnetic field problem which includes the velocity-induced electromotive force. If the problem including the velocity-induced electromotive force is analyzed by FEM using Galerkin method, the solution can be oscillated according to Peclet Number, which is determined by conductivity, permeability, moving velocity and size of mesh. Consequently, the accuracy of the solution can be low and the Loops of flux can be occurred at the secondary back-iron. These loops of flux occurred at the secondary back-iron does not exist physically, but it can be occurred in the analysis. In this case, the loops of flux can be generally removed by using Up-Wind method which is impossible to apply a conventional S/W tool(Maxwell 2D). Therefore, in this paper, authors examined the Loops of flux occurred at the secondary back-iron of LIM according to variations of Peclet Number, and analyzed whether these loops of flux affect on the thrust force characteristics of LIM or not.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.1
• /
• pp.105-115
• /
• 2000

This study was intended to find body pattern of middle aged women and make new experimental basic pattern for upper-half of the body for them. This experimental pattern on the idea of body pattern analysis was prepared. For experimental pattern, the prototype basic model was chosen with the best qualified D model from the four meaningful existing patterns. After several steps of correction experimental pattern was made. Comparing with basic D model, the new experimental pattern composed of additional bust girth by 1cm, wider back waist by 0.5cm than front waist and additional armhole by 0.5cm keeping the same size for back and front widths. Making a shoulder line up by 3cm the armhole became deeper accordingly and the room for girth has been transferred to length. Front neck girth became deeper downward but back neck girth risen a little bit. Side line of the bodice formed with inward slope taking from the waist line by 2cm. Instead of dart, modified side line slope was more practical by its function and appearance. Abdominal girth which is lower than waist girth by 8.5cm kept in same size with bust girth. Then abdominal girth became more comfortable. New experimental pattern with changes has been examined in function and appearance. In conclusion, the new experimental basic pattern for the middle-aged women has been proved more practical for both in bodice and sleeve than other existing ones in terms of function and appearance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.594-597
• /
• 2002

We studied the effect of secondary electron emission from the back plate of AC-PDP, on the ramp waveform driving of the system, using two-dimensional PDP cell discharge simulator. It is found that the secondary electron emission from back plate plays a significant role in getting a stable weak discharge during the ramping up of X-Y electrode voltage. This is because grounded address electrode acts as a cathode during the setup of surface charge, and the secondary electron emission from phosphor in the back plate must be large enough to accumulate surface charges on the dielectric layers without strong plasma discharge. We have concluded that the secondary electron emission coefficient(${\gamma}$) of phosphor, besides MgO, must be known to understand the characteristics of the PDP system. A few suggestions for improvement of the system is also made and tested.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.2
• /
• pp.193-200
• /
• 2013

PURPOSE: The purpose of this study was to find out variations in body posture by using the baby carrier at the front side and back side. METHODS: Thirty two healthy and young female who will bring up infants and had no musculoskeletal disorders of neck, lumbar and low limb were recruited for this study. They were each marked about ears of tragus, cervical 7th, acromion anterior end, anterior superior iliac spine, posterior superior iliac spine, greater trochanter and lateral malleolus as landmarks to measure variations of body posture when they carry infants at the front side and back side. Landmarks were regarded as the creteria in order to measure NeckFlexion angle(NF), Foreward shoulder angle(FSA), Pelvic tilt(PT), Sway angle(SA), Head displacement(HD) and Scapular displacement(SD). Variations in body posture were measured from the neutral position to the front and back side by using Image J. RESULTS: There were significance level (p<.05) in NF, PT, SA, HD and SD except for FSA in two different side. CONCLUSION: The results of this study indicate that each of the using ways of baby carrier for baby care was influenced postural responses of young women. therefore, it could be considered to apply to women who have abnormal body posture in order to minimize musculoskeletal disorders.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3B
• /
• pp.199-206
• /
• 2006

In this paper, we analyzed the weakness of the Back-door type private network which was effective method of system security and transmission speed in the same area without firewall system, and presented the solution to improve it. To prove the effect of this solution, Windows based systems and UNIX based systems are set up in same area, data transmission was tried. According to the result, this solution can maintain the advantage of the Back-door type private network and can have the advantage of removing file server and increasing operation efficiency by reducing the number of operation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.100-103
• /
• 1991

In the treatment of mandibular prognathism with concomitant features of narrow alar base and some paranasal deficiency, simultaneous paranasal augmentation for the additional esthetic effect can be considered, if it is determined to correct the mandibular prominence and class III by a mandibular set-back. Alloplastic augmentation has several advantages upon the autogenous means in the respect of dimensional stability and simplicity of operation. This is a case report of silastic paranasal augmentation performed simultaneously with mandibular set-back surgery which has a period of 15 months of follow-up postoperatively.