• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.103-120
• /
• 2012

The study aimed to evaluate the appearance of the men's work clothes jumpers developed to suggest the prototype work clothes jumper patterns by using the 3-D clothing simulation technology. The 3-D simulated clothing images considered the upper body features of men in the age range between 20 and 59 in South Korea. A questionnaire survey conducted previously suggested a basic jumper style with shirt collar and snap opening cuffs for the heavy industry workers; and discomforting parts of the work clothes jumper of the subject workers have been referred to for the experimental jumper appearance test. Besides, defining the measurements of men's upper bodies enabled to generate the men's 3-D virtual models representing each age group's average body feature. The significant body measurement factors for men's 3-D body modeling and jumper pattern-making were stature for the height factor; chest, waist and hip circumferences for the circumference factor; waist back, hip and arm lengths and interscye front/back for the length factor; and back neck breadth for the breadth factor and armscye and scye depths for the depth factor. The men's body measurements of 30's were implemented to three experimental jumper pattern-making methods, i.e. the 1st method using the relations based on stature and chest circumference; the 2nd method using the direct body measurements; and the 3rd method adopting the maximum ease amount of given body measurements whether relations or direct measurements except the direct measurement of scye depth. A comparison among the three experimental jumpers' simulated images highlighted that the appropriate ease amount of the jumper gained higher scores in terms of the jumpers' front, side, back and sleeve parts and the total silhouettes. Therefore the 3rd experimental jumper was finally selected for the heavy industry workers.

• Korean Journal of Human Ecology
• /
• v.12 no.5
• /
• pp.767-776
• /
• 2003

The purpose of this study was to classify side somatotypes of the trunk by analysing photographic data. Then their distribution according to the age groups was studied. The subjects were 315 females of 18 to 49 year-old. Thirty one photographic measurements were taken to each subject. The factors affecting the side somatotype of the trunk were obtained by principal component analysis, vertical size, posterior/anterior depth and neck posture. The side somatotypes of the trunk were classified into 4 types and their differences were shown by analysing photographic data. The side silhouettes of 4 types were compared with balanced type. By suggesting the canonical discriminant function with the unstandardized canonical coefficient, individual somatotype of the trunk could be discriminated from the photographic data of anterior neck height, anterior waist height, posterior waist depth, buttock height, and anterior depth at the level of back protrusion. The frequency distribution of the side somatotypes of the trunk according to the age groups could be applied for clothing construction and the rate of clothing production.

• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.778-792
• /
• 2015

The purpose of this study is to identify women (aged from 49~59), who have recently emerged as consumers, and their clothing preferences, and it suggests how to make jackets provide better fit and wearability. The results of the study are as follows. In drafting a pattern for size 66 tailored collar jacket with an X-silhouette, it was made with front waist length measuring B/4+1.5 cm, a back length of B/4+1.3 cm, an armhole depth of B/4, a hip ease of H/4+1.2 cm and a sleeve opening of 34.5 cm, to allow for easy movement. In drafting a size 66 high neck collar jacket, it was made with a front and back waist length measuring B/4+1.5 cm, an armhole depth of B/4, a hip ease of H/4+1.2 cm and a sleeve opening of 35 cm. In drafting a size 66 sports collar jacket with an A-silhouette, it was made with front and back waist lengths measuring B/4+1.5 cm, an armhole depth of B/4, and a side dart of 1.3 cm, to provide raglan sleeves. The last experimental jacket pattern improved the appearance and moving fitness evaluation especially for shoulder and arm movement. Based on analysis, jackets were made and subjected to an appearance evaluation using multi-modules to test the level of wearing satisfaction for each fabric and silhouette. the results of the multi-module wearing tests indicate that the preferred silhouettes caused less stressful situations in terms of both psychological and physiological signals.

• Fashion & Textile Research Journal
• /
• v.10 no.3
• /
• pp.329-334
• /
• 2008

The purpose of this research is to develop the design, pattern and size system of brief as a measurement garment in order to obtain more precise silhouettes and sizes of the body in 3D measurements. The results of this research are as follows: First, nylon/lycra materials which elasticity is equivalent to 18%(wale) and 27%(course), were selected as a material for briefs to minimize possible error in measurement and deformation of body shape caused by looseness or tightness in its measured parts. And T-back style design was selected, of which briefs neither deform human body nor cause overlapping or excessive tightness when was put on the measurement garment over it. Second, different darts for men and women were adopted into the pattern in consideration for the shape of hip. Third, the waist band of briefs was located between the waistline and abdominal girth line so that it didn't interfere with measurement, and using a wide band of 40mm minimized the tightness of the human body. In addition, the stitch lines and sewing procedure were simplified to minimize the deformation of body shape resulting from inseams and stitch lines. Finally, for the size of briefs, 6 cm intervals were set on the basis of the waist girth and 8 kinds for men and 6 kinds for women were selected in descending order of appearance rate by the interval sections. English T meaning T-back design and numbers representing the waist girth were marked in parallel for the name of size.

• Journal of Information Processing Systems
• /
• v.14 no.5
• /
• pp.1114-1135
• /
• 2018

A multiple classification system based on a new boosting technique has been approached utilizing different biometric traits, that is, color face, iris and eye along with fingerprints of right and left hands, handwriting, palm-print, gait (silhouettes) and wrist-vein for person authentication. The images of different biometric traits were taken from different standard databases such as FEI, UTIRIS, CASIA, IAM and CIE. This system is comprised of three different super-classifiers to individually perform person identification. The individual classifiers corresponding to each super-classifier in their turn identify different biometric features and their conclusions are integrated together in their respective super-classifiers. The decisions from individual super-classifiers are integrated together through a mega-super-classifier to perform the final conclusion using programming based boosting. The mega-super-classifier system using different super-classifiers in a compact form is more reliable than single classifier or even single super-classifier system. The system has been evaluated with accuracy, precision, recall and F-score metrics through holdout method and confusion matrix for each of the single classifiers, super-classifiers and finally the mega-super-classifier. The different performance evaluations are appreciable. Also the learning and the recognition time is fairly reasonable. Thereby making the system is efficient and effective.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.934-942
• /
• 2011

This study was intended to analyze conventional grading increments and methods for middle-age men's pants, and to suggest new grading guidelines that will enable to improve satisfaction with size and silhouette as a result of combining the concept of grading, which help maintain the ratio and proportion by sizes as one of ready-made apparel's advantages, with body form oriented and aesthetic approaches. In the apparel industry, the current sizing specifications and methods adopted by relevant companies, as well as the characteristics of body forms of men aged 35 to 55 years were comparatively analyzed to find out problems and ultimately to suggest their solutions or improvements. It was considered that as the conventional grading practices used in the industry were customary on the basis of the past experiences, it was required to take the body forms of target consumers into account and also, to reconsider the conventional grading methods. Analyses of sizing and specifications by brands show that 4 to 19 sizes including 82 or 84 as standard size have been produced. Since men's apparel has a large number of sizes with the large range of sizes, grading is critically important. As silhouettes depend on the distribution of grading rule values at each point of increment pattern in the main regions during grading, it is necessary to consider both size grading and form variations. To maintain an appropriate silhouette with keeping the angle of center back line of a pattern, it is desirable to set the ratio of side line part to center part from the crease line to approximately 3:7. It is required to diversify the values of grading rules according to different sizes and pattern regions in consideration for the body forms of key consumers. In addition, if the natural lines of designs and patterns for the width increments of waist circumference and hip circumference, the increments of hip width in pant's front and back panels, the ratio of grading rule values of the right and left sides of crease line, knee circumference, thigh circumference and so on are taken into account, grading will be satisfactory in the all aspects of size, silhouette and ratio.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.826-835
• /
• 2021

The purpose of this study was to compare the similarity between actual and virtual pants using a virtual 3D CLO program. A subject corresponding to the average size of a women in her twenties was selected and an avatar with the same specifications was produced. Silhouettes of the pants were classified into trousers, slacks, and wide pants and images of actual and virtual pants were evaluated from the front, side, and back. The results were as follows: Overall, the resemblance of the trousers was evaluated higher than that of other pants. The average similarity of trousers was 4.20 at the front, 3.98 at the side, and 4.17 at the back, which was much like the actual clothing. In contrast, that of the slacks was 3.62, 3.73, and 3.79 and of the wide pants was 3.81, 3.53, and 3.97. The similarity between the actual and virtual clothing was relatively well reproduced when the shape of the pants was like the silhouette of the human body. However, if the pants were tight or loose, virtual fits failed to display the wrinkles caused by the tightness or the excessive slack. The virtual fit showed fewer wrinkles and did not depict the location and the shape of hemlines as accurately as the actual fit, although virtual fits adequately displayed the baseline and dart on the pants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.301-312
• /
• 2000

This study conducted an analysis of the middle aged women whose ages are from 35 to 59 years old in order to give those ladies much external satisfaction and covered body lines. I have come to present a few characters of body types as silhouettes which resulted in the factors of the upper bodies of middle aged women. I have adopted SAS(statistical analysis system) as a data process method of this survey. The followings are the results analysis. 1. The item of height have decreased, but increased in the items of thickness among the late middle aged women. 2. The body componant factor of middle aged women are extracted as 10 items, and the rate of their cumulative contribution is 78.9%. The first is the thickness of upper body, the second is the thickness of side upper body, the third is the height of upper body, the fourth is the length of upper body the fifth is width of upper body, the sixth is the projected rate of back, the seventh is the projected rate of breast, the eighth is the squared rate of shoulder, the ninth is the crooked rate of neck, and the tenth is the upper from of breast. 3. The body types of middle aged women can be classified into 4 types, and the followings are their characters. Type 1 is a standard type as the most common body character of the middle aged women, showing the appearing rate of 42.4%. Type 2 is a semi-curved body type like the curved figure of side body, showing the appearing rate of 34.5%. Type 3 is a reverse body type with the projected breast feature of front body, showing the appearing rate of 20.9%. Type 4 is a crooked body type with a tall height and crooked neck, showing the appearing rate of 2.2%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.3 s.35
• /
• pp.208-215
• /
• 1990

The purpose of this study is to provide the fundamental data of a dummy design for more suitable ready made clothing by making a pattern of somatic types and analyzing their morphological characteristics in accordance with different pattern of somatic types. The side view silhouettes of 90 junior high school girls of age $13\~16$ in seoul urban area were measured by means of the plan photographing and the low data were examined by principal component analysis, while the principal component analysis was applied and three components were extracted and then interpreted to explain to variation of the form of the body. Using three components respectively the cluster analysis was carried out and the subject classified into 4 cluster The following outcomes are obtained. . The results of principal component analysis of this study would be turned out the three; 1) The first principal component shows the degree of erectness or stoop of the figure. 2) The second principal component was a stature length or a growth rate. 3) The third principal component was the obesity component. 2. The results of cluster analysis by using three principal component analysis would be turned out the four cluser; 1) Cluster 1 ($29\%$ of the total) is characterized with lower stature. 2) Cluster 2 ($21\%$ of the total) is characterized with backward somatotype, and the highest leg. 3) Cluster 3 ($23\%$ of the total) is thicked back of neck. 4) Cluster 4 ($27\%$ of the total) is characterized with forward somatotype, and highest stature, height.