• 소성∙가공
• /
• 제20권6호
• /
• pp.461-467
• /
• 2011

An artificial body force method is presented to accurately simulate drawing processes in which back pressing is exerted. A rigid-plastic finite element method is applied together with a numerical scheme to eliminate the numerically incurred plastic deformation in rigid or elastic region, which significantly influences simulation results because it eventually changes reduction of area in drawing. Back tension or compression is applied by body force at the rear part of material to obtain numerically stable solution. Two typical examples are shown, a drawing process with back tension applied and a tube drawing with a fixed plug and back pressing applied.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.338-343
• /
• 2007

We presented a special method of forging hollow shafts of hard-to-form material, which is composed of piercing with back pressing and hollow shaft extrusion. The presented method was applied to cold forging a bushing of an excavator. The finite element simulation technology was employed for developing the optimized process and the predictions were compared with the experiments. The method was also applied to an automotive part and was verified to be powerful for manufacturing the cold forged hollow shafts of the hard-to-form materials.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.470-473
• /
• 2009

In this paper, back pressure forging processes of which back pressures are exerted by mechanical forces including spring reaction are simulated by three-dimensional finite element method. The basic three-dimensional approach extended from two-dimensional approach is accounted for. An axisymmetric backward and forward extrusion process having a back pressing die, which is exposed to oscillation of forming load due to variation of reduction ratios with stroke and its related frequent variation of major deforming region, is simulated by both two and three dimensional approaches to justify the presented approach by their comparison. A three-dimensional forging process having a back pressing die attached to the punch by a mechanical spring is simulated and the results are investigated to reveal accuracy of the presented approach.

• 소성∙가공
• /
• 제19권5호
• /
• pp.273-276
• /
• 2010

In this paper, back pressure forging processes of which back pressures are exerted by mechanical forces including spring reaction are simulated by three-dimensional finite element method. The basic three-dimensional approach extended from two-dimensional approach is accounted for. An axisymmetric backward and forward extrusion process having a back pressing die, which is exposed to oscillation of forming load due to variation of reduction ratios with stroke and its related frequent variation of major deforming region, is simulated by both two and three dimensional approaches to justify the presented approach by their comparison. A three-dimensional forging process having a back pressing die attached to the punch by a mechanical spring is simulated and the results are investigated to reveal accuracy of the presented approach.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.148-153
• /
• 2002

Spring back is the typical deformation of pressing process. This phenomenon much affects productivity and especially Incurs the unexpected result of assembling process. We have been searching for the various of the spring back to minimize spring back effect, because it is inevitable.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.528-538
• /
• 2011

As a forming method for curved hull plates more efficient than the flame bending, mechanical bending using multi point press forming and die-less forming is discussed in this paper. the mechanical forming is a flexible manufacturing system for automatically forming of hull parts. It is especially suited to varied curved parts. This paper discusses a multiple point pressing machine composed of a pair of reconfigurable punches in order to achieve the rapid forming of curved hull plates using division forming and presents how forming information is obtained from the given design surface. Although the mechanical forming can be efficient in the metal forming, spring back after pressing is a phenomenon which must be carefully considered when quantifying the process variables. If the spring back is not accurately controlled, the fabricated shell plate cannot meet assembly tolerance. This paper describes the principles to calculate the proper stroke of each punch at the divided areas. the strokes are determined by an iterative process of sequential pressing and spring back compensation from an unfolded flat shape to its given design surface. FEA(finite element analysis) is used to simulate the spring back of the plate and the IDA(iterative displacement adjustment) method adjusts the offset of pressing punches from the deformation results and the design surface. The shape deviations of two surfaces due to spring back are compensated by integrated system using FEA and IDA method. For the practical application, It is aimed to develop an integrated system that can automatically perform the compensation process and calculate strokes of punches of the double sides' reconfigurable multiple-press machine and some experimental results obtained with mechanical bending are presented.

• 동국한의학연구소논문집
• /
• 제8권2호
• /
• pp.155-173
• /
• 2000

한의학의 진단(診斷)에는 망(望) 문(聞) 문(問) 절(切)의 사진법(四診法)과 여러 가지의 변증체계(辨證體系), 즉 기혈진액변증(氣血津液辨證) 장부변증(臟腑辨證), 육경변증(六經辨證), 위기영혈변증(衛氣營血辨證), 삼초변증(三焦辨證), 사상체질변증(四象體質辨證) 등이 응용되어 지고 있으며, 또한 그와 더불어 병상(症狀) 증후감병진단법(證候鑑別診斷法)등이 선택적으로 활용되어 지고 있다. 이러한 광범위(廣範位)한 진단방법(診斷方法)가운데 절진(切診)은 손가락 및 손바닥의 감각(感覺)을 운용(運用)해서 일정부위(一定部位)를 촉지(觸指), 접압(接壓)하는 검사방법(檢査方法)으로써 절맥진(切脈診)과 접진(接診)으로 크게 나눌 수 있다. 이중 안진(按診)이란 손을 사용하여 직접 환부에 촉모(觸摸) 안압(按壓)하여 이상변화를 알아내고 나아가서는 질병(疾病)의 부위(部位)와 성질(性質)과 병정(病情)의 경중(輕重) 등의 내부(內部)의 변화(變化)와 체표(體表)의 반응(反應)을 관찰(觀察)하여 중요(重要)한 변증자료(辨證資料)를 얻는 진단방법(診斷方法)의 한 종류(種類)를 말한다. 또한 접진(接診)에는 안기표(按肌表), 접수족(接手足), 안흉복(按胸腹), 접유혈진법(接兪穴診法)등을 들 수 있다. 배유혈(背兪穴)의 진단법(診斷法)은 경기(經綺)이라는 반응로(反應路)를 통(通)하여 체표(體表)에 발현(發現)되는 압통(壓痛), 자발통(自發痛), 긴장(緊張), 이완(弛緩), 경결(硬結) 및 조색상물(條索狀物) 등의 현상(現象)으로 부터 내부장기(內部臟器)의 병변(病變)을 진단(診斷)하는 방법(方法)이다. 이에 저자(著者)는 접진(接診)의 내용(內容)과 방법(方法)을 연구하면서 십이경맥(十二經脈)의 시동병(始動病) 소생병(所生病)을 알아보고 혈위진단(穴位診斷)의 방법(方法) 및 주의점(注意點)등을 아울러 정리하므로써 다음과 같은 결론(結論)을 얻었다. 1. 유혈(兪穴)은 각(各) 장부(臟腑)의 사기(邪氣)가 주입(注入)하는 곳으로 장병(臟病) 한증(寒症) 허증(虛症)의 의미를 내포한 음성병증(陰性病症) 치료(治療)에 중요(重要)한 곳이다. 2. 유차(兪次)의 촉진(觸診) 즉(卽) 모지(母指)로서 척추극돌기(脊椎棘突起) 좌우측(左右側)을 접압(接壓)하여서 상향(上向)이나 하향(下向)으로 추압지(推壓指)하면 극돌기(棘突起)의 돌(突), 함요(陷凹), 긴장(緊張), 이완(弛緩) 및 압통(壓痛)의 출현부위(出現部位)에 따라 계통별(系統別) 질환(疾患)을 판단(判斷)할 수 있다. 3. 실제(實際) 임상(臨床)에서 환자(患者)의 진단(診斷) 치료(治療)에 있어서 배부접진(背部接診)은 중요(重要)한 진단(診斷)의 한 영역(領域)으로 빠뜨리지 말고 꼭 참고(參考)하여야 할 것으로 사료(思料)된다. 4. 장부질환(臟腑疾患)에 대한 진단방법(診斷方法)의 다양화(多樣化)와 치료영역(治療領域)의 확대(擴大) 및 치료율(治療率)의 상승(上昇)을 위해 배부유혈(背部兪穴)의 정확(正確)한 인식(認識)과 유혈접진(兪穴接診)을 통하여 정확(正確)한 진단(診斷)이 되었으면 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.804-807
• /
• 1997

Recently equal-channel angular pressing (ECAP) has been employed to produce ultra-fine grain size materials. In this paper pure-Zirconium is considered due to its applicability to nuclear reactors. Among many process parameters of ECAP frictional effect on the plastic deformation of die has been investigated. The back pressure effect due to friction increases the stress level of die especially at the crossing area of channels, which may result in plastic deformation of die. The finite element method has been employed to investigate this issue.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2010년도 춘계 종합학술대회 논문집
• /
• pp.112-114
• /
• 2010

Mainly through the pervasive emergence of portable devices (laptops, PDAs, now iPods), the screen arts, that is, the cinematic arts has suffered the loss of what constitutes the core of its existence: the theatre and theatre-audience. This paper discusses cinema's distinct place and significance in culture and its difference from television and other forms of mass media. The most pressing question at hand would be, "how do you bring back attention to the medium that is distinctly cinematic?" "How do you bring people back to the theatres?" This paper argues that cinema, and the film industry as a whole must push for a technological leap that is in conjunction with culture. With mentioning of the rapid development of 3D technologies in the moving images, this paper proposes that such technological novelties and innovation are necessary conditions for a new kind of film culture to emerge.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.538-543
• /
• 2008

A roller with a shaft and hot oil paths for pressing electrodes of polymer batteries were modeled and analyzed by FEM. There are many hot oil tubes in the roller and shaft, through which $72^{\circ}C$ hot oil flows for heating the surface of a roller and shaft. Thermal deformations and temperatures distributions of the roller and shaft were calculated and a convection boundary condition on surfaces was used. The influence of existence of a groove in the shaft on the flatness of a roller surface caused by thermal deformation was investigated. In addition, the amount of spring-back of electrodes under vacuum pressure and heating was calculated after the hot rolling process. It was shown from this study that the groove in one shaft had a favorable effect on the surface flatness.