References
- C. J. Luis, J. León, R. Luri, 2005, Comparison between finite element method and analytical methods for studying wire drawing processes, J. Mater. Process. Technol., Vol. 164-165, pp. 1218-1225. https://doi.org/10.1016/j.jmatprotec.2005.02.138
- S. S. Han, J. G. Eom, S. M. Jang, M. C. Lee, M. S. Joun, S. J. Kang, Y. H. Son, 2009, Special simulation technique of multi-faced long bolt forging process, Proc. Kor. Soc. Tech. Plast. Conf., KSTP, Incheon, Kor., pp. 44-47.
- P. Karnezis, D. C. J. Farrugia, 1998, Study of cold tube drawing by finite-element modelling, J. Mater. Process. Technol., Vol. 80-81, pp. 690-694. https://doi.org/10.1016/S0924-0136(98)00127-7
- M. Hayashi, M. Jin, S. Thipprakmas, M. Murakawa, J. C. Hung, Y. C. Tsai, C. H. Hung, 2003, Simulation of ultrasonic-vibration drawing using the finite element method(FEM), J. Mater. Process. Technol., Vol. 140, pp. 30-35. https://doi.org/10.1016/S0924-0136(03)00699-X
- K. Yoshida, H. Furuya, 2004, Mandrel drawing and plug drawing of shape-memory-alloy fine tubes used in catheters and stents, J. Mater. Process. Technol, Vol. 153-154, pp. 145-150. https://doi.org/10.1016/j.jmatprotec.2004.04.182
- S. Norasethasopen, K. Yoshida, 2006, Finite-element simulation of inclusion size effects on copper shaped-wire drawing, Mater. Sci. Eng. A, Vol. 422, pp. 252-258. https://doi.org/10.1016/j.msea.2006.02.015
- S. Norasethasopen, 2008, Influence of process parameters on shape quality and area fraction in round-to-hexagonal composite wire drawing, J. Mater. Process. Technol., Vol. 203, pp. 137-146. https://doi.org/10.1016/j.jmatprotec.2007.10.016
- T. Kuboki, K. Nishida, T. Sakaki, M. Murata, 2008, Effect of plug on levelling of residual stress in tube drawing, J. Mater. Process. Technol., Vol. 204, pp. 162-168. https://doi.org/10.1016/j.jmatprotec.2007.11.029
- C. C. Chen, S. Kobayashi, 1978, Deformation analysis of multi-pass bar drawing and extrusion, CIRP Ann., Vol. 27, p. 151.
- M. S. Joun, S. M. Hwang, 1993, Pass schedule optimal design in multi-pass extrusion and drawing by finite element method, Int. J. Mach. Tools Manuf., Vol. 33. No. 5, pp. 713-724. https://doi.org/10.1016/0890-6955(93)90102-Z
- G. H. Majzoobi, F. Fereshteh Saniee, A. Aghili, 2008, An investigation into the effect of redundant shear deformation in bar drawing, J. Mater. Process. Technol., Vol. 201, pp. 133-137. https://doi.org/10.1016/j.jmatprotec.2007.11.127
- S. K. Lee, D. C. Ko, B. M. Kim, J. H. Lee, S. W. Kim, Y. S. Lee, 2007, A study on monobloc tube drawing for steering input shaft, J. Mater. Process. Technol., Vol. 191, pp. 55-58. https://doi.org/10.1016/j.jmatprotec.2007.03.062
- Y. Tang, L.-S. Lu, D. Yuan, Q.-H., Wang, X.-I. Zhao, 2009, Experimental and FEM study on sinking of miniature inner grooved copper tube, J. Mater. Process. Technol., Vol. 209, pp. 5333-5340. https://doi.org/10.1016/j.jmatprotec.2009.04.003
- M. S. Joun, J. G. Eom, M. C. Lee, 2008, A now method for acquiring true stress-strain curves over a large range of strains using a tensile test and finite element method, Mech. Mater., Vol. 40, pp. 586-593. https://doi.org/10.1016/j.mechmat.2007.11.006
- M. S. Joun, J. G. Eom, M. C. Lee, J. H. Park, D. J. Yoon, 2008, Tensile test based material identification program AFDEX/MAT and its application to two new pre-heat treated steels and a conventional Cr-Mo steel, Int. J. Mod. Phys. B, Vol. 22, pp. 5768-5773. https://doi.org/10.1142/S0217979208051145
- M. S. Joun, 2009, Advanced Solid Mechanics and Finite Element Method, Jinsaem Media.
- M. S. Joun, H. G. Moon, I. S. Choi, M. C. Lee, B. Y. Jun, 2009, Effects of friction laws on metal forming processes, Tribol. Int., Vol. 42, pp. 311-319. https://doi.org/10.1016/j.triboint.2008.06.012
- A. Skołyszewski, M. Packo, 1998, Back tension value in the fine wire drawing process, J. Mater. Process. Technol., Vol. 80-81, pp. 380-387. https://doi.org/10.1016/S0924-0136(98)00116-2