• 한국입자에어로졸학회지
• /
• 제6권1호
• /
• pp.21-27
• /
• 2010

New process consisting of electrospray and epitaxial crystal growth processes was applied to the preparation of c-plane oriented barium ferrite ($BaFe_{12}O_{19}$) thin film for high density magnetic recording media. Sodium citrate aided process was proper to preparation of amorphous $BaFe_{12}O_{19}$ nanoparticles with geometric mean diameter of 3 nm and geometric standard deviation of 1.1. The electrospray was applicable to the prepare of amorphous $BaFe_{12}O_{19}$ thin film on a substrate, and the film thickness could be controlled by adjusting the electrospray deposition time. The c-plane oriented $BaFe_{12}O_{19}$ thin film was successfully prepared by 3 step annealing process of the $BaFe_{12}O_{19}$ amorphous film on a sapphire($Al_2O_3$) substrate; annealing at $350^{\circ}C$ for 30 min, annealing at $500^{\circ}C$ for 30 min, and annealing at $700^{\circ}C$ for 60 min.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.427-428
• /
• 2000

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.425-426
• /
• 2000

• Journal of Magnetics
• /
• 제9권4호
• /
• pp.116-120
• /
• 2004

Hexagonal barium-ferrite ($BaFe_{12}O_{19}$, magnetoplumbite structure; BaM) film with perpendicularly c-axis orientation was successfully deposited on (100) silicon substrates with an MgO (111) underlayer by rf diode sputtering and in-situ heating at $920^{\circ}C$. The magnetic and structural properties of 0.27 ${\mu}m$ thick BaM films on MgO (111) underlayers were compared to films of the same thickness deposited onto single-crystal MgO (111) and c-plane ($000{\ell}$) sapphire ($Al_2O_3$) substrates by vibrating sample magnetometry (VSM), x-ray diffractometer (XRD), and atomic force microscopy (AFM). The thickness dependence of MgO (111) underlayers on silicon wafer was found to have a large effect on both magnetic and structural properties of the BaM film. The thickness of 15 nm MgO (111) underlayers produced BaM films with almost identical magnetic and structural properties as the single-crystal substrates; this can be explained by the lower surface roughness for thinner underlayer thicknesses. The magnetization saturation ($M_s$) and the ratio $H_{cII}/H_{c{\bot}}$ for the BaM film with a 15 nm MgO (111) underlayer is 217 emu/cc and 0.24, respectively. This is similar to the results for the BaM films deposited on the single-crystal MgO (111) and sapphire substrates of 197 emu/cc and 0.10, 200 emu/cc and 0.12, respectively. Therefore, the proposed MgO (111) underlayer can be used in many applications to promote c-axis orientation without the cost of expensive substrates.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.428-431
• /
• 2013

We demonstrate that a partial loading of $Ni_{0.5}Zn_{0.5}Fe_2O_4$ (Ni-Zn ferrite) film remarkably improves impedance matching of electrically small $Ba_3Co_2Fe_{24}O_{41}$ ($Co_2Z$) hexaferrite antenna. A 3 ${\mu}m$ thick Ni-Zn ferrite film was deposited on a silicon wafer by the electrophoresis deposition process and post-annealed at $400^{\circ}C$. The fabricated Ni-Zn ferrite film has saturation magnetization of $268emu/cm^3$ and coercivity of 89 Oe. A partial loading of the Ni-Zn ferrite film on the $Co_2Z$ hexaferrite helical antenna increases antenna return loss to 24.7 dB from 9.0 dB of the $Co_2Z$ antenna. Experimental results show that impedance matching and maximum input power transmission to the antenna without additional matching elements can be realized, while keeping almost the same size as the $Co_2Z$ antenna size.

• 한국세라믹학회지
• /
• 제34권1호
• /
• pp.37-44
• /
• 1997

졸겔법중 딥코팅법을 이용하여 조성비 2Fe/Ba=5.25 졸로부터 바륨페라이트 박막을 제조하였다. 졸의 겔화과정은 4단계로 구분할 수 있으며, 8$0^{\circ}C$에서 90분간 반응시켜 제조한 졸이 코팅용 졸로서 가장 적합한 특성을 나타내었다. 박막층에 형성된 침상 형태의 입자들은 기판에 수평 하게 위치하고 있었으며, 박막 두께가 증가함에 따라 그 경향은 증가하였다. 침상형 입자의 자화용이축 방향은 장축 방향이었다.

• 한국자기학회지
• /
• 제2권1호
• /
• pp.22-28
• /
• 1992

대향타겟형 스파터기에서 철과 BaO 복합타켓트를 사용한 반응성 스파터링 방법으로 고밀도 수직자기기록용 바륨훼라이트박막을 제조하였다. 표면 열 산화된 규소 웨이퍼를 기판으로 사용한 경우 바륨훼라이트박막의 c축이 기판에 완전히 수직으로 배열하기 위해서는 $750^{\circ}C$의 기판가열이 필요 하였다. 기판가열온도를 낮추기 위하여 ZnO, ${\alpha}-Fe_{2}O_{3}$와 ${\gamma}-Fe_{2}O_{3}$ 씨앗층을 사용한 결과 바륨훼라이트와 같은 육방결정구조이면서 (002)면이 기판에 평행하게 배향된 ZnO 씨앗층을 사용하였을 때 $600^{\circ}C$에서 c축배향이 우수한 바륨훼라이트박막을 성막시킬 수 있었다. 바륨훼라이트의 포화자화값은 295 emu/cc 수직보자력은 1.7kOe 각형비는 0.75 이었다. 복합타켓트를 사용하여 $230\;{\AA}/min$의 피착속도로 바륨훼라이트박막을 피착시킬 수 있었는데 이것은 지금까지 발표된 산화물 타켓트를 사용한 경우보다 5-20배 빠른 것이다.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.627-630
• /
• 1995

BaM films have a lot of advantage of chemical stability and mechanical stability as compared with a metallic thin film. In this paper, (Ba.Pb)M films have been prepared by using dc magnetron sputtering system and the dependences of their crystallographic characteristics and magnetic properties on oxygen pressure($Po_{2}$) were studied. The films prepared at $Po_{2}$ of around 0.02mTorr exhibit a fine particle-like structure and ${\Delta}{\theta}_{50}$ is as small as $1^{\circ}$. $Hc_{\bot},\;Hc_{//}$ and Ms of (Ba.Pb)M films are 700-800Oe, 200Oe and 180-230emu/cc, respectively.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.195-201
• /
• 2024

The low-temperature deposition of BaNi_(2-x)Co_xFe₁₆O₂₇ thin films with a Ba hexaferrite structure for electromagnetic shielding was studied. The BaNi_(2-x)Co_xFe₁₆O₂₇ thin films produced through the spin spray process were suitable for thin film deposition on a flexible substrate because it crystallized well at low temperature below 90℃. The change in shielding characteristics depending on the Co content of the BaNi_(2-x)Co_xFe₁₆O₂₇ thin film was investigated, and excellent shielding characteristics with S21 of -1 dB were obtained in a wide frequency range of 26~40 GHz when the Co content was 0.4 or more. The purpose of this study is to analyze changes in shielding properties caused by change in Co content in relation to phase changes in BaNi_(2-x)Co_xFe₁₆O₂₇ and obtain basic data for developing excellent flexible electromagnetic wave shielding materials.

• 한국재료학회지
• /
• 제7권5호
• /
• pp.423-430
• /
• 1997

졸-겔 dip coating법에 의해 제조한 바륨페라이트 박막의 미세구조와 결정학적인 구조 특성에 관해 조사하였다. 기판에 형성된 바륨페라이트 입자는 침상 형태의 입자들로 구성되어 있었으며, C축은 장축 방향이었고, 막 두께가 증가함에 따라 침상형 입자들은 기판에 평행하게 배향하는 경향을 나타내었다. 박막은 바륨페라이트층, Ba, Fe, SiO$_{2}$로 구성되어 있는 중간층, 그리고 기판층인 SiO$_{2}$층으로 구성되어 있었으며, 중간층과 SiO$_{2}$층간의 계면은 Ba 와 SiO$_{2}$간의 화합물로 구성되어 있었다. 침상 형태의 입자는 95$0^{\circ}C$에서 3시간 열처리하므로써 완전히 소실하였고, 130$0^{\circ}C$에서 3시간 열처리하므로써 c면이 기판에 평행하게 위치하는 완전한 육각판상 형태의 입자로 변화되었다.