• Journal of Forest and Environmental Science
• /
• v.25 no.2
• /
• pp.119-126
• /
• 2009

An efficient in vitro plant regeneration system was developed through shoot proliferation from axillary buds of Tectona grandis (L.f), APNBV-1 (Andhra Pradesh North Badrachalam Venkatapuram-1) clone. Multiple shoots of high quality were produced in vitro from axillary bud explants. An average of 4.39 shoots/explant were obtained on Murashige and Skoog's (MS) medium supplemented with plant growth regulators (PGRs) benzyl amino purine (BA), kinetin (KN), indole acetic acid (IAA), gibberillic acid ($GA_3$), growth adjuvants casein hydrolysate (CH), adenine sulphate (Ads) and antioxidants ascorbic acid, polyvinyl pyrrollidine (PVP). Eighty five percent of rooting was observed in ex vitro rooting media containing IBA and vermiculite. In ex vitro rooting, single shoots with 2 to 3 nodes were subjected to IBA of different concentrations at different periods of time intervals. Direct rooting in vermiculite at 500 ppm concentration of IBA resulted in 4.3 number of roots with 2 cm length. Minimum response of rooting and length of roots were recorded at 100 ppm concentration of IBA. Planlets were transferred to plastic bags for short acclimatization stage in green house where they survived at 95%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.284-285
• /
• 2007

본 논문에서는 저소음 및 저 신호 왜곡 특성을 가지는 내환원성 유전체 원료를 개발하기 위하여 $(Ca_{0.7}Sr_{0.3})(Zr_{0.97}Ti_{0.03})O_3$에 $CaTiO_3$, $SrTO_3$, $BaTiO_3$를 첨가하여 이에 따른 유전 특성을 조사하였다. 첨가량의 조절 및 glass frit 첨가를 통하여 환원성 분위기에서도 유전율 80 ~ 100, 절연저항 (R*C) 500[ohm-F] 이상의 유전특성을 얻었다. 본 연구결과로 얻어진 유전재료를 적용하면 무소음 및 저 신호 왜곡 특성을 가지면서도 고 신뢰성의 MLCC를 제작할 수 있을 것으로 예상된다.

• Journal of the Korean Society of Radiology
• /
• v.6 no.3
• /
• pp.173-182
• /
• 2012

It was well known that working memory highly related with academic achievement. The aim of this study was to investigate the differences of brain activation which visually evoked working memory(encoding and retrieval) through functional Magnetic Resonance Imaging(fMRI) in Higher Academic Achievement Group(HAAG) and Lower Academic Achievement Group(LAAG) of college students. 20 assigned college students participated in fMRI studies. They underwent totally 210 seconds repeated paradigm. Stimulation paradigm composed with resting time and encoding and retrieval seeing the figures from the mirror with head coil. The brain activation maps and their quantification were analyzed by the statistical parametric mapping(SPM99) program from level of significance 95%. HAAG was more significantly higher than LAAG in bilateral prefrontal lobe(brodmann 46) associated with working memory, inferior parietal lobe associated with attention, and visual association area in encoding figures test. Right dosoprefrontal lobe(BA 44), right fusiform gyrus associated with decision of figure and, lingual gyrus were more activated in retrieval test with HAAG. On the other hand, LAAG was more significantly higher than HAAG in cingulate gyrus during encoding test. Thalamus, basal ganglia, cerebellum were more activated in retrieval test. Consequently, We could guess from these results HAAG more effectively executed than LAAG in visual working memory test.

• Journal of Korean Society of Forest Science
• /
• v.82 no.2
• /
• pp.139-151
• /
• 1993

The virgin forests on and around Sungin-bong in Ulreung-do, an island situated between the Korean peninsula and Japanese archipelago, were investigated phytosociologically. They were classified into two communities, i.e. Fagus crenata var. multinervis - Majanthemum dilatatum community and F. crenata var. multinervis - Sasa kuriensis community. The former was subdivided into several units ; Acer takesimense - Allium victorialis var. platyphyllum group, including Tsuga sieboldii - Taxus cuspidata var. tatifolia subgroup and a typical subgroup, and Acer mono var. savatieri - Rumohra standishii group, including Dystaenia takeshimana subgroup and a typical subgroup. The other was subdivided into two subunits ; Acer okamotoanum group and a typical group. It was estimated that this area was orginally covered with beech and maple dominated forest vegetation and with Machilus dominated forest or bamboo forest. However, in these days, The natural vegetation of it has been destroyed and in future, may also be disturbed gradually by human activities. Judging from the coincidence method, the structure and distribution of the forest communities was more related to altitude than to topography. The phytomass, based upon the basal area of each community to $100m^2$ showed that Acer mono var. savatieri - Rumohra standishii group ($BA=7574.1cm^2$, $P=9,882,058cm^3$) haved the largest value and Tsuga sieboldii - Taxus cuspidata var. latifolia subgroup($BA=2126.3cm^2$, $P=1,746,755cm^3$) showed the smallest value. The flora of the vascular plants collected from this area consists of 71 families, 187 genera, 243 species, 1 subspecies, 44 varieties, 6 forms and 294 taxa in total.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.83-100
• /
• 2022

The Zhenzigou Pb-Zn deposit, which is one of the largest Pb-Zn deposit in the northeast of China, is located at the Qingchengzi mineral field in Jiao Liao Ji belt. The geology of this deposit consists of Archean granulite, Paleoproterozoinc migmatitic granite, Paleo-Mesoproterozoic sodic granite, Paleoproterozoic Liaohe group, Mesozoic diorite and Mesozoic monzoritic granite. The Zhenzigou deposit which is a strata bound SEDEX or SEDEX type deposit occurs as layer ore and vein ore in Langzishan formation and Dashiqiao formation of the Paleoproterozoic Liaohe group. White mica from this deposit are occured only in layer ore and are classified four type (Type I : weak alteration (clastic dolomitic marble), Type II : strong alteration (dolomitic clastic rock), Type III : layer ore (dolomitic clastic rock), Type IV : layer ore (clastic dolomitic marble)). Type I white mica in weak alteration zone is associated with dolomite that is formed by dolomitization of hydrothermal metasomatism. Type II white mica in strong alteration zone is associated with dolomite, ankerite, quartz and alteration of K-feldspar by hydrothermal metasomatism. Type III white mica in layer ore is associated with dolomite, ankerite, calcite, quartz and alteration of K-feldspar by hydrothermal metasomatism. And type IV white mica in layer ore is associated with dolomite, quartz and alteration of K-feldspar by hydrothermal metasomatism. The structural formulars of white micas are determined to be (K_0.92-0.80Na_0.01-0.00Ca_0.02-0.01Ba_0.00Sr_0.01-0.00)_0.95-0.83(Al_1.72-1.57Mg_0.33-0.20Fe_0.01-0.00Mn_0.00Ti_0.02-0.00Cr_0.01-0.00V_0.00Sb_0.02-0.00Ni_0.00Co_0.02-0.00)_1.99-1.90(Si_3.40-3.29Al_0.71-0.60)_4.00O₁₀(OH_2.00-1.83F_0.17-0.00)_2.00, (K_1.03-0.84Na_0.03-0.00Ca_0.08-0.00Ba_0.00Sr_0.01-0.00)_1.08-0.85(Al_1.85-1.65Mg_0.20-0.06Fe_0.10-0.03Mn_0.00Ti_0.05-0.00Cr_0.03-0.00V_0.01-0.00Sb_0.02-0.00Ni_0.00Co_0.03-0.00)_1.99-1.93(Si_3.28-2.99Al_1.01-0.72)_4.00O₁₀(OH_1.96-1.90F_0.10-0.04)_2.00, (K_1.06-0.90Na_0.01-0.00Ca_0.01-0.00Ba_0.00Sr_0.02-0.01)_1.10-0.93(Al_1.93-1.64Mg_0.19-0.00Fe_0.12-0.01Mn_0.00Ti_0.01-0.00Cr_0.01-0.00V_0.00Sb_0.00Ni_0.00Co_0.05-0.01)_2.01-1.94(Si_3.32-2.96Al_1.04-0.68)_4.00O₁₀(OH_2.00-1.91F_0.09-0.00)_2.00 and (K_0.91-0.83Na_0.02-0.01Ca_0.02-0.00Ba_0.01-0.00Sr_0.00)_0.93-0.83(Al_1.84-1.67Mg_0.15-0.08Fe_0.07-0.02Mn_0.00Ti_0.04-0.00Cr_0.06-0.00V_0.02-0.00Sb_0.02-0.01Ni_0.00Co_0.00)_2.00-1.92(Si_3.27-3.16Al_0.84-0.73)_4.00O₁₀(OH_1.97-1.88F_0.12-0.03)_2.00, respectively. It indicated that white mica of from the Zhenzigou deposit has less K, Na and Ca, and more Si than theoretical dioctahedral mica. Compositional variations in white mica from the Zhenzigou deposit are caused by phengitic or Tschermark substitution [(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI+(Si⁴⁺)^IV] substitution. It means that the Fe in white mica exists as Fe²⁺ and Fe³⁺, but mainly as Fe²⁺. Therefore, white mica from layer ore of the Zhenzigou deposit was formed in the process of remelting and re-precipitation of pre-existed minerals by hydrothermal metasomatism origined metamorphism (greenschist facies) associated with Paleoproterozoic intrusion. And compositional variations in white mica from the Zhenzigou deposit are caused by phengitic or Tschermark substitution [(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI+(Si⁴⁺)^IV] substitution during hydrothermal metasomatism depending on wallrock type, alteration degree and ore/gangue mineral occurrence frequency.

• Journal of the Mineralogical Society of Korea
• /
• v.11 no.1
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• Journal of Plant Biotechnology
• /
• v.46 no.4
• /
• pp.291-296
• /
• 2019

This study was conducted to determine the effect of a light-emitting diode (LED) on in vitro shoot growth and rooting in teak (Tectona grandis L.). In the experiments with apical bud explants, the greatest shoot elongation (3.2 cm) occurred when they were cultured on DKW medium under 50% blue and 50% red LED mixture (BR), whereas no differences in growth were observed in different light sources (florescent light [F] or BR) or media (MS or DKW). The highest number of shoot multiplication (2.4/explant) or elongation (4.94 cm) was achieved with 0.5 or 1.0 mg/L 6-Benzyladenine (BA) treatment under BR. In addition, the best rooting rate (93.8%) or root length (1.3 cm) was recorded with 0.5 mg/L indole-3-butyric acid (IBA) treatment under BR, and the highest root induction (3.1/explant) was observed in 0.2 mg/L IBA under BR. The in vitro rooted plantlets were hardened and survived well on soil.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.45-49
• /
• 2003

We have designed and fabricated the single-layer high $T_{c}$ SQUID magnetometer consisting of a directly coupled grain boundary junction SQUID with an inductance of 100 pH and 16 nested parallel pickup coils with the outermost dimension of 8.8 mm ${\times}$ 8.8 mm. The magnetometer was formed from a YBCO thin film deposited on an STO(100) bicrystal substrate with a misorientation angle of $30^{\circ}$. The SQUID magnetometer was further improved by optimizing the multi-loop pickup coil design for use in unshielded environments. Typical characteristics of the dc SQUID magnetometer had a modulation voltage of 40 $\mu\textrm{V}$ and a white noise of $30fT/Hz^{1}$2/. The SQUID magnetometer exhibited a 1/f noise level at 10 Hz reduced by a factor of about 3 compared with that of the conventional solid type pickup coil magnetometers and a very stable flux locked loop operation in magnetically disturbed environments.s.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.19-23
• /
• 2004

YBCO do superconducting quantum interference device (SQUID) magnetometers based on bicrystal Josephson junctions on 10 mm ${\times}$ 10 mm $SrTiO_3$ substrates have been fabricated. The pickup coil of the device was designed to have 16 parallel loops with 50-fm-wide lines. We could obtain optimised direct coupled YBCO SQUID magnetometer design with field sensitivity $B_{N}$ $\Phi$/ of $4.5 nT/\Phi_{0}$ and magnetic field noise $B_{N}$ of about $22 fT/Hz^{1}$2/ with an I/f corner frequency of 2 Hz measured inside a magnetically shielded room. Preliminary results of magnetocardiograph measurement using the HTS SQUID magnetometers show signal to noise ratio of about 110, which is comparable to the quality of a commercial MCG system based on Nb-SQUIDs.

• Microbiology and Biotechnology Letters
• /
• v.1 no.2
• /
• pp.93-98
• /
• 1973

The acid protease was isolated from the culture broth of the Penicillum sp. grown in the wheat bran media. 'quot;The crude purification of this enzyme was carried out by extraction with distilled water and precipitated with saturated ammonium sulfate. " The activity of this enzyme was found to be very strong by Folin′s colorimetric method. The results were as follows. 1. The optimum pH of the enzyme activity was at 3.0 and its optimum temperature was 5$0^{\circ}C$. 2. Although the enzyme activity to hydrolyze casein was maximal at 5$0^{\circ}C$, its activity decreased rapidly by about 50％, treated at 5$0^{\circ}C$ for 30 min. When treated at 4$0^{\circ}C$ for 60 min, the enzyme activity decreased to 75％ of original value and did not decrease any more. 3. The enzyme was stable at pH 2.0 to 6.0. 4. This enzyme activity was not effected by metal ions; C $d^{＋＋}$, Z $n^{＋＋}$, $Co^{＋＋}$, H $g^{＋＋}$, M $n^{＋＋}$, P $b^{＋＋}$, $Mg^{＋＋}$, L $i^{＋}$, C $u^{＋＋}$, $Ba^{＋＋}$, A $g^{＋}$, $Al^{＋＋＋}$, $Ca^{＋＋}$, F $e^{＋＋}$, and F $e^{＋＋}$ 5. Also, it was not effected by treatemnt of EDTA.