• 한국재료학회지
• /
• 제22권9호
• /
• pp.489-493
• /
• 2012

Green phosphors $K_2BaW_2O_8:Tb^{3+}$(1.0 mol%) were synthesized by solid state reaction method. Differential thermal analysis was applied to trace the reaction processes. Three endothermic values of 95, 706, and $1055^{\circ}C$ correspond to the loss of absorbed water, the release of carbon dioxide, and the beginning of the melting point, respectively. The phase purity of the powders was examined using powder X-ray diffraction(XRD). Two strong excitation bands in the wavelength region of 200-310 nm were found to be due to the ${WO_4}^{2-}$ exciton transition and the 4f-5d transition of $Tb^{3+}$ in $K_2BaW_2O_8$. The excitation spectrum presents several lines in the range of 310-380 nm; these are assigned to the 4f-4f transitions of the $Tb^{3+}$ ion. The strong emission line at around 550 nm, due to the $^5D_4{\rightarrow}^7F_5$ transition, is observed together with weak lines of the $^5D_4{\rightarrow}^7F_J$(J = 3, 4, and 6) transitions. A broad emission band peaking at 530 nm is observed at 10 K, while it disappears at room temperature. The decay times of $Tb^{3+}$ $^5D_4{\rightarrow}^7F_5$ emission are estimated to be 4.8 and 1.4 ms, respectively, at 10 and 295 K; those of the ${WO_4}^{2-}$ exciton emissions are 22 and 0.92 ${\mu}s$ at 10 and 200 K, respectively.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.380-385
• /
• 2023

In this study, an MPB PMNT system containing 0.05 to 0.10 wt.% BaTiO₃ was synthesized using a traditional chemical method and its pyroelectricity was investigated. Pyroelectricity, dielectricity, and ferroelectricity of the synthesized BaTiO₃-PMNT system were analyzed by heat treatment at 1240~1280 ℃ for 4 hours to evaluate its applicability as a pyroelectric sensor. Unlike the simple ABO₃ ferroelectric, the BaTiO₃-doped PMNT system exhibited phase transition characteristics over a wide temperature range typical of complex perovskite structures. Although no dramatic change could be confirmed depending on the amount of BaTiO₃ added, stable pyroelectricity was maintained near room temperature and over a wide temperature range. When the amount of BaTiO₃ added increased from 0.05BaTiO₃-PMNT to 0.10BaTiO₃-PMNT, the electric field slightly increased from 5.00×10³ kV/m to 6.75×10³ kV/m, and the maximum value of remanent polarization slightly increased from 0.223 C/m² to 0.234 C/m². The pyroelectric coefficients of 0.05BaTiO₃-PMNT and 0.10BaTiO₃- PMNT at room temperature were measured to be ~0.0084 C/m²K and ~0.0043 C/m²K, respectively. The relaxor ferroelectric properties of the BaTiO₃-PMNT system were confirmed by analyzing the plot of K_max/K versus (T-T_max)^γ. The BaTiO₃-doped MPB PMNT system showed a distinct pyroelectric performance index at room temperature, and the values were F_v ~ 0.0362 m²/C, F_d ~ 0.575×10^-4 Pa^-1/2.

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.445-451
• /
• 2019

형광체 내 모체로 사용될 때 활성 이온 주위에 분포하여 형광 특성에 많은 영향을 미치는 알칼리 토금속인 $Ba^{2+}$ 이온을 기반으로 하는 바나데이트 화합물인 $Ba_2GdV_3O_{11}$에 희토류 이온 $Eu^{3+}$를 첨가하여 형광 강도 및 형광 수명을 연구하였다. 고상법을 이용하여 $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체를 합성하였으며 X선 회절 분석을 통하여 형광체의 결정성을 확인하였다. $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체의 형광특성은 광학 및 레이저를 이용하여 측정하였다. $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체의 에너지 전이와 확산은 $Eu^{3+}$의 농도에 크게 의존한다. $Eu^{3+}$의 농도가 낮을 때 CT 밴드로의 강한 형광을 보이나 $Eu^{3+}$의 농도가 높아질수록 4f - 4f 전이에 의한 형광이 강하게 나타난다. $Eu^{3+}$ 이온의 농도 증가로 인해 이온 간의 에너지가 확산되어 형광의 수명시간은 감소하였다. 에너지 전이는 낮은 $Eu^{3+}$ 농도에서 두 $Eu^{3+}$ 이온 사이에서 발생하며 에너지 확산은 높은 $Eu^{3+}$ 농도에서 크게 발생한다.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1386-1393
• /
• 2018

The solubility of $TiO_2$ in $NaF-CaF_2-BaF_2$ ternary eutectic melts was investigated at the temperature range of $1025-1150^{\circ}C$. The least-squares equation was obtained from the relationship between the reciprocal temperature and the natural logarithm of the titanium concentration in the melts saturated with $TiO_2$. The corresponding partial molar enthalpy of dissolution of $TiO_2$ was found to be 188 kJ/mol. The titanium saturation concentration was 3.73 wt% at $1100^{\circ}C$. From the titanium concentration change with the added amount of $TiO_2$ at different holding time after a final stirring, it was found that not only complete dissolution of $TiO_2$ but also enough sedimentation of excessive $TiO_2$ should be guaranteed to obtain more reliable solubility data. The holding time of 10 h was found to be enough for the excessive $TiO_2$ particles to settle down in our experimental conditions. It is noteworthy that in case of adding $TiO_2$ in excess of its solubility, the $Ba_{1.12}(Ti_8O_{16})$ phase was observed at the lower and bottom of the solidified salt ingots.

• Korean Journal of Radiology
• /
• 제22권2호
• /
• pp.253-262
• /
• 2021

Objective: To determine whether the values of hepatic apparent diffusion coefficient (ADC) can differentiate biliary atresia (BA) from non-BA or be correlated with the grade of hepatic fibrosis in infants with cholestasis. Materials and Methods: This retrospective cohort study included infants who received liver MRI examinations to evaluate cholestasis from July 2009 to October 2017. Liver ADC, ADC ratio of liver/spleen, aspartate aminotransferase to platelet ratio index (APRI), and spleen size were compared between the BA and non-BA groups. The diagnostic performances of all parameters for significant fibrosis (F3-4) were obtained by receiver-operating characteristics (ROCs) curve analysis. Results: Altogether, 227 infants (98 males and 129 females, mean age = 57.2 ± 36.3 days) including 125 BA patients were analyzed. The absolute ADC difference between two reviewers was 0.10 mm²/s for both liver and spleen. Liver ADC value was specific (80.4%) and ADC ratio was sensitive (88.0%) for the diagnosis of BA with comparable performance. There were 33 patients with F0, 15 with F1, 71 with F2, 35 with F3, and 11 with F4. All four parameters of APRI (τ = 0.296), spleen size (τ = 0.312), liver ADC (τ = -0.206), and ADC ratio (τ = -0.288) showed significant correlation with fibrosis grade (all, p < 0.001). The cutoff values for significant fibrosis (F3-4) were 0.783 for APRI (area under the ROC curve [AUC], 0.721), 5.9 cm for spleen size (AUC, 0.719), 1.044 x 10^-3 mm²/s for liver ADC (AUC, 0.673), and 1.22 for ADC ratio (AUC, 0.651). Conclusion: Liver ADC values and ADC ratio of liver/spleen showed limited additional diagnostic performance for differentiating BA from non-BA and predicting significant hepatic fibrosis in infants with cholestasis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.325-325
• /
• 2007

The perovskites in the $LaAlO_3-BaZrO_3$ system (i.e., $(1-x)LaAlO_3-xBaZrO_3$ were fabricated by a solid state reaction and their dielectric properties were investigated. For the compositions of x=0.1~0.9, the mixture of $LaAlO_3$ with a rhombohedral structure and $BaZrO_3$ with a cubic was observed when the sintering was conducted at $1500^{\circ}C$, indicating that the solubility of constituent elements was very low and a narrow solid solution region might exist. The large difference of ionic radii between $La^{3+}$ ion (0.136nm, C.N.=12) and $Ba^{2+}$ ion (0.161nm) or $Al^{3+}$ ion (0.0535nm, C.N.=6) and $Zr^{4+}$ ion (0.072nm) might hinder the mutual substitution. Within the compositions of x=0~0.7, the dielectric constant of the mixture increased with the amount of $BaZrO_3$, i.e., x value, which was in good agreement with the logarithmic mixing rule (In $_{r,i}={\Sigma}v_iln\;_{r,i}$). The increase in $BaZrO_3$ doping decreased $Q{\times}f$ value significantly due to the low $Q{\times}f$ value of $BaZrO_3$ itself, a poor microstructure of the mixture with an increased grain boundary area per volume, and defects in the cation and oxygen sub-lattices which were respectively caused by the evaporation of barium during the sintering process and the substitution of Ba on La-site or Al on Zr-site.

• 분석과학
• /
• 제6권2호
• /
• pp.239-246
• /
• 1993

ITO coated glass, bare glass, 그리고 (100)Si 기판 위에 증착된 $(BaSr)TiO_3$ 박막의 구조는 기판의 종류에 관계없이 변하지 않았으나 결정성은 다결정 ITO층과 (100)Si 기판에 있어서 증대되었다. ITO coated glass 기판 위에 증착된 $(BaSr)TiO_3$ 박막의 조성은 거의 화학양론적으로 일치하였으며 ((Ba+Sr)/Ti=1.08~1.09) 증착 중 상당히 치밀하고 균질하였다. 그러나 증착온도가 증가함에 따라 성장한 박막과 ITO층 사이에, 그리고 ITO층과 base glass 사이에 확산이 보다 심화되었다. ITO coated glass 기판 위에 증착된 $(BaSr)TiO_3$ 박막은 상당히 투명하였으며(투과율 약 80%) 굴절률($n_f$)은 기판온도의 증가에 따라 2.138~2.286이었다.

• 마이크로전자및패키징학회지
• /
• 제10권1호
• /
• pp.57-63
• /
• 2003

$BaO-Nd_2O_3-TiO_2$계 유전체 세라믹스에 lithium borosilicate계 유리를 첨가하여 저온소결특성과 마이크로파 유전특성을 조사하였다. 유리 프릿을 10∼l3 wt%의 범위로 첨가함으로서 순수한 $BaO-Nd_2O_3-TiO_2$계 세라믹스의 소결온도($1300^{\circ}C$)보다 현저히 낮은 850∼$900^{\circ}C$의 온도범위에서 상대밀도 97%이상의 소결체를 얻을 수 있었다. 10 wt%의 유리 프릿을 첨가함으로서 85$0^{\circ}C$의 소성온도에서 유전율($\epsilon_r$)54 및 품질계수($Q{\times}f$)2400 GHz그리고 공진주파수의 온도계수($\tau_f$)는 $+8ppm/^{\circ}C$으로서 우수한 유전 특성을 가지는 소결체를 얻을 수 있었다.

• 대한임상검사과학회지
• /
• 제48권4호
• /
• pp.378-387
• /
• 2016

심혈관계 위험인자를 비침습적으로 분석할 수 있는 PWV에 관한 다수의 선행연구에서 의견이 분분하고, 결과에 대한 일관성이 부족한 부분을 재현하고자 연구에 임하였으며, 더욱이 날로 증가하고 있는 노인을 대상으로 운동참여 여부와 성별에 따른 노인의 말초동맥파속도(baPWV), 신체구성과 심혈관계 변인의 상관성 및 재변인의 차이를 검증하는데 연구의 목적이 있다. 규칙적인 운동을 수행해온 노인남성 39명(이하, 운동군M) 과 운동을 수행해 오고 있지 않은 동일 연령대의 노인남성 38명(이하, 통제군M), 규칙적인 운동을 수행해온 노인여성 40명(이하, 운동군F) 과 운동을 수행해오고 있지 않은 동일 연령대의 노인여성 37명(이하, 통제군F)을 대상으로 변인에 대한 상관성과 집단별 재변인들 간의 차이를 알아본 결과 노인남성 운동군의 baPWV range와 근육량(r=0.357, p=0.026), 수축기혈압(r=0.468, p=0.003), rbaPWV (r=0.406, p=0.010), lbaPWV (r=0.333, p=0.038)가 통계적으로 유의한 상관관계를 보였고, 노인남성 통제군의 경우는 baPWV range와 심박수(r=0.395, p=0.014), rbaPWV (r=0.598, p=0.000), lbaPWV (r=0.602, p=0.000)가 유의한 상관성을 보였다. 노인여성 운동군은 baPWV range와 진단명(r=0.321, p=0.044), 수축기혈압 (r=0.399, p=0.011), 이완기혈압(r=0.545, p=0.000), rbaPWV (r=0.648, p=0.000), lbaPWV (r=0.676, p=0.000)가 유의한 상관성을 보였고, 노인여성 통제군 경우는 baPWV range와 나이 (r=0.471, p=0.003), rbaPWV (r=0.836, p=0.000), lbaPWV (r=0.801, p=0.000)가 통계적으로 유의한 상관성을 보였다. 반면 말초동맥파속도 변인 중 통계적으로 유의한 차이를 보인 그룹은 없는 것으로 나타났고, 요둔위($F_{3,150}=9.197$, p=0.000), 근육량($F_{3,150}=74.295$, p=0.000), 체지방율($F_{3,150}=35.045$, p=0.000), 수축기 혈압($F_{3,150}=3.525$, p=0.017)이 통계적으로 유의한 차이를 나타냈다. 본 연구에서는 집단별 특성에 따라 다양한 결과가 나타난다는 사실을 알 수 가 있었으며, 신체구성 변인과 심혈관계 변인 중 수축기 혈압은 운동 여부에 따라 민감한 변화와 차이를 보인 것으로 보아 노인의 경우 운동그룹은 신체구성과 심혈관계 일부 변인에 변화를 줄 수 있다고 단정지어 볼 수 있겠으나, 위팔-발목 맥박파전파속도에 대해서는 일관된 결과가 도출되지 않아서 이에 대한 지속적인 연구가 필요한 것으로 사료된다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권4호
• /
• pp.404-409
• /
• 1996

The structural and electric properties of $Y_{1-x}$YbF$_{x}$Ba$_{2}$Cu$_{3}$O$_{7-y}$(x=0.0, 0.1, 0.2, 0.3, 0.4, 0.5 and 0.6) have been investigated by using XRD(X-ray diffraction), TMA(thennomechanical analysis), NMR(nuclear magnetic resonance) analysis and four probe method. $Y_{1-x}$YbF$_{x}$Ba$_{2}$Cu$_{3}$O$_{7-y}$ samples were prepared by conventional solid-state reaction method using $Y_{2}$O$_{3}$, BaCO$_{3}$, CuO and YbF$_{3}$ power. TMA and high temperature XRD results shows that orthorhombic to tetragonal phase transition occurs in the unfluorinated 1-2-3 sample while the phase change is not observed in the fluorinated 1-2-3 samples. Superconducting transition temperature(T$_{c}$) increases with increasing YbF$_{3}$ content ; T$_{c}$, of the sample reaching maximum of 102K for x=0.3, and then decreases with further increasing YbF$_{3}$ content. The structural analysis and T$_{c}$ results shows that the fluorine doping stabilize the orthorhombic phase, together with the increase in T$_{c}$.}$ c/.TEX> c/.