• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.319-325
• /
• 1999

Direct current(d.c.)leakage current voltage characteristics of radio-frequencymagnetron sputtered BaTa\sub 2\O\sub 6\ film capacitors with aluminum(A1) top and indium tin oxide (ITO) bottom electrodes have been investigatedas a function of applied field and temperature. In order to study surfacetreatment effect on the electrical characteristics of as-deposited film weperformed exposure of oxygen plasma on $BaTa_2O_6$ surface. d. c.current-voltage (I-V), bipolar pulse charge-voltage (Q-V), d. c. current-time (I-t) andcapacitance-frequency (C-f) analysis were performed on films. All ofthe films exhibita low leakage current, a high breakdown field strength (3MV/cm-4.5MV/cm), and high dielectric constant (20-30). From the temperature dependence of leakage current,we can conclude that the dominant conduction mechanism is ascribed toSchottky emission at high electric field (>1MV/cm) and hopping conduction at lowelectric field (<1MV/cm). According to our results, the oxide plasma surfacetreatmenton as-deposited $BaTa_2O_6$ resulted in lowering interfacebarrier height and thus, leakage current when a negative voltage applied to the A1 electrode. This can be explained by reduction of surface contamination via etching surface and filling defects such as oxygen vacancies.

• 대한수학회보
• /
• 제53권4호
• /
• pp.1105-1112
• /
• 2016

Describing the group of units $U({\mathbb{Z}}G)$ of the integral group ring ${\mathbb{Z}}G$, for a finite group G, is a classical and open problem. In this note, we show that $$U_1({\mathbb{Z}}[T{\times}C_2]){\sim_=}[F_{97}{\rtimes}F_5]{\rtimes}[T{\times}C_2]$$, where $T={\langle}a,b:a^6=1,a^3=b^2,ba=a^5b{\rangle}$ and $F_{97}$, $F_5$ are free groups of ranks 97 and 5, respectively.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.21-27
• /
• 2001

Epoxy/BaTiO$_3$composite film type capacitors with excellent stability at room temperature, uniform thickness, and electrical properties over a large area were successfully fabricated. We fabricated composite capacitor films with good film formation capability and easy process ability, from ACF-resin as a matrix and two kinds of BaTiO$_3$powders as fillers to increase the dielectric constant of the composite film. The crystal structure of the powders and its effects on dielectric constant of the films were investigated by X-ray diffraction. DSC and dielectric properties tests were conducted to decide the right curing temperature and the optimum amount of the curing agent. As a result, the capacitors of $7{\mu}{\textrm}{m}$ thick film with 10nF/cm2 and low leakage current were successfully demonstrated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.364-367
• /
• 2003

[ $(Ba_{0.93}Ca_{0.07})_{1.009}(Ti_{0.82}Zr_{0.18})O_{2.}$ ] 이고 첨가제로 $MnO_2$ 0.2wt%, $Y_2O_3$ 0.18wt%, $SiO_2$ 0.15wt% 유리프릿으로 $(Ba_{0.4}Ca_{0.6})SiO_3$ 1 wt%를 첨가한 조성을 이용하여 각 공정별 최적화를 통해 고 신뢰성이면서 고용량 MLCC를 제작하였다 고 신뢰성 MLCC 제작에서 있어 최적의 소성온도를 확인 할 수 있었으며 외부 전극을 통한 도금액 침투를 방지하여 절연저항 특성을 향상할 수 있음을 확인하였다. 또한 1608 크기의 1.13uF의 용량을 가지는 고 신뢰성 MLCC를 제작하였다.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.22-26
• /
• 2006

Total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcination process, and XRD measurement shows that $BaF_2,\;CuO,\;and\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcination was measured to be ${\sim}2.8$ um by applying slot-die coating method. In particular, addition of Samarium shows critical current of Ic=226 A/cm-w($Jc=3.4\;MA/cm^2$). Also discussed are recent developments in the reel-to-reel processing using F-free Y & Cu precursor solutions. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solutions in MOD process.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.1-4
• /
• 2007

The total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcinations process and XRD measurement shows that $BaF_2,\;CuO,\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcinations was improved to be 2.8um by applying slot-die coating method. In particular, addition of Samarium shows critical current of $I_c=273A/cm-w(J_c=3.8MA/cm^2)$. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solution in MOD process.

• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.144-152
• /
• 2004

이상적인 수복재료는 치아의 저작기능과 심미성을 회복할 수 있어야 하며 동시에 생체 적합성과 구강 내 환경변화에 대한 내구성을 가지고 있어야 한다. 그러나 수복물이 장기간 구강 내 환경에 노출되면 수복물 표면의 마모와 변색 및 수복물 자체의 파괴가 발생될 수 있다. 콤포머도 복합 레진처럼 낮은 마모 저항성을 주요한 단점으로 지적할 수 있다. 본 연구에서는 현재 유치 수복에 많이 사용되고 있는 Dyract(Dentsply, USA), Elan(Kerr, USA), F-2000(3M, USA)의 3종의 콤포머(polyacid modified resin composites)를 알칼리성 용액(0.1N NaOH)에 보관하였을 때 각 제품의 무게손실, 분해층 깊이 및 시편내에서 용출된 Si Al과 Ba의 농도를 평가하여 제품간의 분해저항성을 평가하고 비교를 하고자 하였다. 각 제품 당 6개의 시편을 제작하여 무게 측정을 한 후, 0.1N NaOH용액, 3ml에 저장하여 $60^{\circ}C$에서 보관하였다. 2주후 제거하여 1.23% HCl로 2시간동안 중화하고 증류수로 세척한 후 $60^{\circ}C$에서 건조하였다. 분해저항성은 무게손실, 분해층 깊이 및 시편내의 Si, Al과 Ba의 농도 변화를 근거로 평가하여 다음과 같은 결과를 얻었다. 1. 각 제품의 무게 손실량은 $1.43%{\sim}2.14%$까지 다양하였으며 제품 간에 유의한 차이는 없었다. 2. 각 제품의 표면하 분해층 깊이는 $182.92{\mu}m{\sim}227.70{\mu}m$였으며 제품간에 유의한 차이는 없었다. 3. 각 제품으로부터 용출된 Si와 Al양은 각 제품마다 유의한 차이가 있었으며(p<0.05), Si는 Dyract에서 Al은 F-2000에서 가장 많은 양이 방출되었다. 용출된 Ba양은 각 제품마다 유의한 차이가 없었다. 4. 무게 손실량과 표면하 분해층 깊이 사이의 상관 관계에서 비교적 높은 상관관계를 보였다(r=0.64, p<0.05). 5. 주사전자현미경 관찰시 0.1N NaOH용액에 보관한 후 콤포머기질과 필러사이의 결합의 파괴를 관찰할 수 있었으며, 기질이 소실되어 필러입자가 두드러진 양상을 보였다. 또한 필러입자의 표면은 분해에 의해 탈회된 모습을 보였다. 이상의 결과에서 현재 유치 수복에 사용되고 있는 3종의 콤포머는 분해저항성에 있어 유의한 차이를 보이지 않았다.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.816-819
• /
• 1995

저압 유기금속 화학 증탁법에 의하여 Pt/Ti/SiO$_2$/Si 기판위에 (Ba$_{1-x}$ , Sr$_{x}$)TiO/$_3$박막이 제조 되었다. 제조된 BST 박막의 결정화도는 증착온도가 증가함에 따라 (100)방향으로 우선 성장하였다. 90$0^{\circ}C$에서 증착한 BST 박막은 100kHz의 주파수에서 유전상수가 365, 유전손실이 0.052를 나타내었다. 인가전계에 따라 축전용량의 변화가 작은 상유전 특성을 보였으며 0.2MV/cm인가 전계에서 축적 전하 밀도(charge storage density)는 60fC/$\mu\textrm{m}$$^2$을, 0.15MV/cm인가 전계 영역에서 누설 전류밀도(leakage current density)는 20nA/$\textrm{cm}^2$을 나타냈다.냈다.

• Journal of Acupuncture Research
• /
• 제25권5호
• /
• pp.151-165
• /
• 2008

Objectives : To evaluate the effects of Head Acupuncture versus Upper and Lower Limbs Acupuncture on signal activation of Blood Oxygen Level Dependent(BOLD) fMRI on the Brain and Somatosensory Cortex. Subjects and Methods : 10 healthy normal right-handed female volunteer were recruited. The average age of the 10 subjects was 30 years old. The BOLD functional MRI(fMRI) signal characteristics were determined during tactile stimulation was conducted by rubbing 4 acu-points in the right upper and lower limbs($LI_1$, $LI_{10}$, $LV_3$, $ST_{36}$). After stimulation of Head Acupuncture in Sishencong($HN_1$), $GB_{18}$, $GB_9$, $TH_{20}$ of Left versus Upper and Lower Limbs Acupuncture($LI_1$, $LI_{10}$, $LV_3$, $ST_{36}$ of Right) and took off needles. Then the BOLD fMRI signal characteristics were determined at the same manner. Results : 1. When touched with cotton buds(sensory stimulation), left Parietal Lobe, Post-central Gyrus, primary somatosensory cortex(BA 1, 2, 3), and primary motor cortex(BA 4) were mainly activated. When $ST_{36}$ was stimulated, Frontal Lobe, Parietal Lobe, Cerebellum, and Posterior Lobe as well as Inter-Hemispheric displaying a variety of regions. 2. In signal activation before and after Head Acupuncture reaction, it showed signal activation after removing the acupuncture needle and right Somatosensory Association Cortex, Postcentral Gyrus, and Parietal Lobe were more activated. 3. In reactions of before and after Upper and Lower Limb Acupuncture, it also showed signal activation after removing the acupuncture needle and bilateral Occipital Lobe, Lingual Gyrus, visual association cortex, and Cerebellum were activated. 4. After acupuncture stimulation, In Upper and Lower Limb Acupuncture Group, left frontal Lobe, Precentral Gyrus and Bilateral parietal lobe, Postcentral Gyrus and Primary Somatosensory Cortex(BA 2) were activated. In Head Acupuncture Group, which has most similar activation regions, but especially right Pre-Post central Gyrus, Primary Somatosensory Cortex(BA 3), Primary Motor Cortex, frontal Lobe and Parietal Lobe were activated. Conclusions : When sensory stimulation was done with cotton buds on four acup-points($LI_1$, $LI_{10}4, $LV_3$, $ST_{36}$), while bilaterally activated, contralateral sense was more dominant. It showed consistency with cerebral cortex function. When $ST_{36}$ was stimulated Frontal Lobe, Parietal Lobe, Cerebellum, Posterior Lobe as well as Inter-Hemispheric were stimulated. In Head Acupuncture, it showed more contralateral activation after acupuncture. In Upper and Lower Limb Acupuncture, it showed typically contralateral activation and deactivation of limbic system after acupuncture stimulation. Therefore, there were different fMRI BOLD signal activation reaction before and after Head Acupuncture vs Upper and Lower Limb Acupuncture which might be thought to be caused by acu-points' sensitivity and different sensory receptor to response acupuncture stimulation.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.216-221
• /
• 2010

Employing statistical design of experiments, the difference in doping behaviors of rare-earth ions and their effects on the dielectric property and microstructure of $BaTiO_3$-MgO-$MnO_2$-($Ba_{0.4}Ca_{0.6}$) $SiO_3-Re_2O_3$ (Re = $Y_2O_3$, $Er_2O_3$) system were investigated. Through the statistical analysis we have found that the amount of $Re_2O_3$ are significantly affecting on the dielectric properties. The $Re_2O_3$ improved the dielectric constant, dielectric loss and R*C constant, so the appropriate contents of $Y_2O_3$ and $Er_2O_3$ were 0.8 ~ 1.2 mol% and 0.8 ~ 1.3 mol%, respectively. The MLCC(mutilayer chip capacitor) with $2.0{\times}1.2{\times}1.2mm$ size and 475 nF was also suited for X7R with the above composition. It showed that the dielectric constant and RC constant were 2,839 and 3,675 ${\Omega}F$, respectively in the sintering condition at $1250^{\circ}C$ in $Po_2$ $10^{-7}$ Mpa.