• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.501-507
• /
• 2009

Ordered single-walled hollow aluminogermanate (ALGE) nano-balls(NBs) and nano-tubes(NTs) have been self-assembled from the ALGE precursors having an Al/Ge ratio of 1.33 using simple pH-control. The hollow ALGE NBs with average monodisperse diameters of 5 nm and chemistry of Al/Ge=1.5~1.6 were formed through structural assembly in the ALGE solution (Al/Ge=1.33) highly basified to pH=13(Na/Al=28~30) and followed by immediate acidification to pH=9. When the basified solution(pH=13) were acidified to pH=4, ALGE S-NTs (Short-fiber nano-tubes) with diameters of 3.3 nm, 15~20 nm in length, and chemistry of Al/Ge=2.6~2.8 were successfully synthesized. Whereas the solution was basified to pH=9, and subsequently acidified to pH=4, L-NTs(Long-fiber nano-tubes) with >100 nm in length were synthesized for the first time. The self-assembly of the hollow NBs, S-NTs, and L-NTs form the ALGE precursors can be explained by the degree of $H^+$-dissociation of the -Ge-OH inner surfaces, which was controlled by amount of $Na^+$ and pH conditions of ALGE precursor solutions. This results indicate that target forms of ALGE nanomaterials can be synthesized by simple pH controls.

• Reproductive and Developmental Biology
• /
• v.30 no.3
• /
• pp.175-180
• /
• 2006

This study was conducted to examine the effect of pre activation treatment and activation time of recipient cytoplasm on the development of bovine somatic cell nuclear transfer(NT) embryos. Donor cells were transferred and electrofused to enucleated oocytes before(pre-AC) or after activation(post-AC). Activation was induced with a combination of $Ca^{2+}$-ionophore(A23187) and DMAP. NT embryos were cultured in CR1aa containing 3 mg/ml BSA for 9 days. Some NT embryos were fixed at 0.5 to 2.5 hr after fusion(for post-AC) or activation(for pre-AC) for confocal microscopy. Developmental rate to the blastocyst stage was slightly high in the post-AC group(20.6%) compared to that of pre-AC group(15.3%). However, developmental speed of embryos in the pre-AC group was faster than that of embryos in the post-AC group. Development rates to the blastocyst stage were similar among different activation time before fusion(0.5,2 and 4 hr). The result of the present study suggests that development and nuclear morphology are affected f the activation status of the recipient cytoplasm before fusion.

• Reproductive and Developmental Biology
• /
• v.30 no.3
• /
• pp.219-224
• /
• 2006

The objective of this study was to investigate the toxic effects of Bisphenol A(BPA) and di-2 ethyhexyl phthalate (DEHP) as endocrine disrupters on sperm motility, viability, membrane integrity and abnormality during in vitro incubation of boar semen. Semen were randomly divide into 24 groups and healed with different concentrations of BPA md DEHP($1{\sim}100{\mu}M$) for 3, 6 and 9 hrs, respectively. The percentages of sperm motility and viability decreased by treatment time with both BPA and DEHP, and obiously differ from the controls. The percentages of sperm motility and viability significantly decreased by incubation with both $100{\mu}M$ of BPA and DEHP compared to control and other treatment groups(p<0.05). Sperm membrane integrity was significantly reduced by incubation with 10 and $100{\mu}M$ of BPA and DEHP, respectively(p<0.05), but sperm abnormality were not significantly affect both BPA and DEHP. These results indicate that high concentration of BPA and DEHP($>10{\mu}M$ can affect noxiously the sperm characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.576-582
• /
• 2017

The switching system in a maglev train is an indispensable element for distributing train routes, and it should be designed to ensure safe operation. Unlike conventional wheels on rails, the switching track in EMS-type maglev is supported by a group of 3 to 4 steel girders. When the vehicle changes its route, the segmented track allows the girders to change from a straight position to a curved one with a small radius of curvature. Hence, the structural characteristics of the segmented switching system may affect the levitation stability of the maglev vehicle. This study experimentally evaluates the dynamic interaction between maglev vehicles and a segmented switching system. The results may be helpful for improving the switching system. The measured levitation and lateral air gaps were evaluated at a vehicle speed of 25 km/h, and the ride quality of the Maglev vehicle was determined to be "comfortable" according to the UIC 513 standard.

• Journal of Applied Biological Chemistry
• /
• v.57 no.2
• /
• pp.179-182
• /
• 2014

In the present study, we investigated the effects of methanol extracts from Alpinia katsumadai Hayata against antiviral potential underlying mechanism in glucosidase inhibition. Syncytium formation in Newcastle disease virus (NDV)-infected baby hamster kidney (BHK) cell originates from the trafficking of viral glycoprotein into cell-surface. Methanol extracts inhibited not only syncytium formation, but also trafficking of glycoprotein, hemagglutinin-neuraminidase (HN), onto cell-surface. A. katsumadai extracts showed the inhibitory activities ($IC_{50}$ $25{\mu}g/mL$) against ${\alpha}$-glucosidase. These results suggested that blue chanterelle extracts inhibited the cell-surface expression of NDV-HN glycoprotein without significantly affecting HN glycoprotein synthesis in NDV-infected BHK cells.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5942-5954
• /
• 2015

IT system in supply chain management(hereafter, SCM) has been regarded as one of competitive advantage to win over competing supply chain. SCM participants rush to adopt IT system to be agile for changing environment. Companies expect the improvement of the process integration over the supply chain, which enhance the overall SCM performance. IT system has been considered to influence on effective communication over the wall of firm boundaries. But, the profitability or the effectiveness of IT investment are controversial. This study try to reemphasize the importance of IT system considering the differences of processes, and the influences on the collaboration of supply chain participants. We want to know the perception level of functional managers for the importances, usages, and contributions of IT system in manufacturing sector. Also, we compare the different perception for collaborative SCM among supplier, buyer, and employees of buyer, and try to understand the context in which the IT investment acceptance occurs. We collected 297 responses(199 from line process and 98 from project process respectively). Results show that the importances, usages, and contributions of IT system are higher in the line process than in the project process.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.452-455
• /
• 2009

The Nakdong Delta can be identified by two different geomorphic units. The first one is the upper delta. This is mostly composed of inter-distributary islands that are largely influenced by fluvial processes and attributed to the development of these islands along the river. The other one is the lower delta which is mostly composed of beach ridges. Barrier islands are largely effected by wave processes promoted by the development almost at a right angle to the river. Influenced by the longshore current which flows to the same direction, barrier islands located in the Nakdong river estuary are developing from east to west direction. As a result, the eastern end of the barrier islands are growing toward the north-west direction effected by tidal current which moves toward the same direction. Barrier islands include the Sinho Island, the Jinwoo Island, the Daema deung, the Janga Island, the Baghap deung, the Sae deung, and the Chulsae deung(Doyeo deung). They have orderly emerged from the sea since 1861. Since 2008, a new Deung, a sand dune growing under sea, has been developing rapidly from Chulsae deung to the Dadaepo beach. It made the sailing of small fisher boats impossible. Tidal currents transported a lot of sand and silt around the barrier islands. The landscape of Nakdong river estuary where many barrier islands are distributed will change rapidly affecting land environment.

• Journal of the Korean Geographical Society
• /
• v.41 no.3 s.114
• /
• pp.331-345
• /
• 2006

This study deals with geomorphological process of the sand dune landform including the distribution and surface environments, characteristics of sediments, origins and moving processes in lower reach and mouth delta of Duman River, Northeast Korea and China. The methodology of the study includes image analysis of Landsat TM(1992.10) and ETM(2000.9) and Spot(2005.4) for analysis of land cover, 2 times field survey for recognition of landform and acquisition of sediments raw data materials, and grain analysis and exoscopy about raw data materials. The geomorphic elements from satellite image analysis are composed of the delta, sand spit, active and stable dune, sand bar and riparian vegetated zone. Results of the grain analysis indicate the sediments originated from marine coastal zone than riverine one. This means that present sand dune not so much reflect present climatic and geomorphic environments. Result of the exoscopy analysis show that ratio of quartz, which is comparatively resistant to environment, is highest as $65{\sim}83%$ out of sediments. But the surface of the $30{\sim}40%$ of mineral grains was coated by yellow-colored stained materials, due to chemical weathering. Some grains show rough skin, looking as acicular, network structure and etching pits, affected by physical and chemical weathering.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.143-152
• /
• 2009

The purpose of this study is to evaluate the freezing index and frost penetration depth. The freezing index and frost penetration depth were analyzed using air temperature and temperature profile of pavement system in Korea LTPP-SPS(Long Term Pavement Performance-Specific Pavement Study) site. The predicted frost penetration depth were then compared with the measured one from the LTPP sites. And the trend of annual freezing index was analyzed using the temperature data of meteorological stations located in the vicinity of Korea LTPP-SPS site. The result showed that the freezing index was rapidly decreased since 1987, and it was known that the use of freezing index determined from the past 30 years temperature data could cause the over estimates in the pavement thickness design. The temperature profile measured at 3 sections of LTPP-SPS sites showed that the temperature of subbase layer was above $0^{\circ}C$, even though anti-frost layers were found in these sections. Comparing the measured and calculated frost depth, the frost depth calculated from the subgrade frost penetration permissible method showed a similar trend with the measured frost depth.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.227-236
• /
• 2007

The design number of gyration is required in the process of asphalt mix design using gyratory compactor. The purpose of this study is to select the design number of gyration for asphalt mix design in the laboratory. Three types of methods were used to select the design number of gyration. The first method is to select the gyration number which gives the same density with the mixtures compacted with 75 blows of Marshall Compaction. The second method is to select the gyration number which gives the same deformation strength with the mixtures compacted with 75 blows of Marshall Compactor. The third method is to select the gyration number which meet the 4% air voids. Ten mixtures, one type of aggregate(granite), one type of asphalt binder(pen. 60-80), and 10 types of gradation, were prepared for the laboratory tests. As a result, 100 number of gyration was selected for the design number of gyration of the asphalt mix design. This result shows a similar trend with the design number of gyration used in the foreign countries. Thus, the design number of gyration selected in this study can be used for the asphalt mix design using the gyratory compactors.