• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.255-256
• /
• 2009

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.282-292
• /
• 2003

This paper proposes an efficient data structure for forwarding IPv4 and IPv6 packets at the gigabit speed in backbone routers. The LPM(Longest Prefix Matching) search becomes a bottleneck of routers' performance since the LPM complexity grows in proportion to the forwarding table size and the address length. To speed up the forwarding process, this paper introduces a data structure named BMT(Bit-Map Tie) to minimize the frequent main memory accesses. All the necessary search computations in BMT are done over a small index table stored at cache. To build the small index table from the tie representation of the forwarding table, BMT represents a link pointer to the child node and a node pointer to the corresponding entry in the forwarding table with one bit respectively. To improve the poor performance of the conventional tries when their height becomes higher due to the increase of the address length, BMT adopts a binary search algorithm for determining the appropriate level of tries to start. The simulation experiments show that BMT compacts the IPv4 backbone routers' forwarding table into a small one less than 512-kbyte and achieves the average speed of 250ns/packet on Pentium II processors, which is almost the same performance as the fastest conventional lookup algorithms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.84-87
• /
• 2000

The microwave dielectric properties of complex perovskite-structured $Ba(Mg_{1/3}Ta_{2/3})O_3$ ceramics were investigated with calcining condition. The BMT ceramics were prepared by conventional mixed oxide method. Calcining conditions were $1200^{\circ}C$ for 10hr., $1300^{\circ}C$ for 2hr., and 5hr., respectively. And the specimens were sintered at $1650{\mu}m$. The structural and microwave properties of BMT ceramics were investigated by XRD, SEM and network analyzer. In the case of BMT ceramics calcined at $1300^{\circ}C$ for 5 hr., dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.26, 31,144(at 1GHz), 6.11[ppm/$^{\circ}C$], respectively.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.178-183
• /
• 2016

Ferroelectric relaxor ceramics with $BaTiO_3-NaNbO_3-Bi(Mg_{1/2}Ti_{1/2})O_3$ ternary compositions (BT-NN-BMT) have been prepared by sol-gel powder synthesis and consequent bulk ceramic processing. Through the modified chemical approach, fine and single-phase complex perovskite compositions were successfully obtained. Temperature and frequency dependent dielectric properties indicated typical relaxor characteristics of the BT-NN-BMT compositions. The ferroelectric-paraelectric phase transition became diffusive when NN and BMT were added to form BT based solid solutions. BMT additions to the BT-NN solid solutions affected the high temperature dielectric properties, which might be attributable to the compositional inhomogeneity of the complex perovskite and resulting weak dielectric coupling of the Bi-containing polar nanoregions (PNRs). The temperature stability of the dielectric properties was good enough to satisfy the X9R specification. The quasi-linear P-E response and the temperature- stable dielectric properties imply the high potential of this ceramic compound for use in high temperature capacitors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.167-170
• /
• 2000

The structural changes and the dielectric properties of $(Ba_{1-x}Ca_x)(Mg_{1/3}Ta_{2/3})O_3$ (x=0, 0.2, 0.4, 0.6, 0.8, 1) were investigated. The densities of samples were gradually decreased with increasing x, (BMT=7.69, CMT=5.25 $g/cm^3$). The crystal structure of BMT was a untiltied perovskite structure, however BCMT showed antiphase tilting and antiphase-inphase tilting structure. The dielectric constant($\varepsilon_r$) of the highest value was 33 at x=0.2 (BMT=24, CMT=17). The maximum quality factor was 27,500GHz in BMT. The quality factor· of BCMT was decreased to x<0.2 (5,000GHz), and was gradually increased to x>0.2. The temperature coefficients of dielectric constant was positive at x<0.8, and negative in CMT.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.80-89
• /
• 2010

u-Health refers to "Always, ubiquitously" prevention against disease, diagnosis, medical treatment service that can receive treatment even if patient does not visit hospital as abbreviated word of ubiquitous and health. U-Health transmits in individual's living body sign and measuring of health information and health information system that is consisted of process of analysis and feedback transmiting and measure individual's living body signal and health information and health proprietary company or medical institution operates. If analyze pattern to information that health information system is transmited, health care officer or chief physician means that offer healthcare and medical treatment service to remote about target customer. Wish to present authoritativeness model for u-Health's inside and outside of the country same native place and u-Health's BMT in this research.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.496-499
• /
• 2008

공공부분 S/W사업은 분리발주가 원칙이고 일괄발주가 예외지만 현재 많은 공공부분 S/W사업은 일괄 발주 사업으로 진행되고 있다. 일괄발주는 SI업체가 S/W업체도 선택하여 입찰 및 개발하기 때문에 발주자가 원하는 품질 좋은 S/W를 선택할 수 없고, 발주자가 S/W를 업그레이드 및 확장할 때 SI업체에 의존하게 되는 단점이 있다. 이런 단점을 보완하고, S/W분리발주를 활성화시키기 위해 지식경제부(구 정보통신부)에서는 S/W분리발주 매뉴얼을 작성하여 보급 및 교육을 하고 있으며, 발주처에서는 품질이 우수한 S/W를 선택하기 위한 S/W분리발주 BMT를 공인된 시험기관인 한국정보통신기술협회(TTA) SW 시험인증센터에서 BMT를 실시하고 있다. 본 논문은 위협관리시스템(TMS) S/W분리발주 BMT를 공인된 국가 시험인증기관인 한국정보통신기술협회(TTA) SW시험인증센터에서 수행한 사례를 기술하였다

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.763-765
• /
• 2008

최근 물류가 취급되는 발착장에서는 업무효율을 높이기 위해 RFID 시스템을 구축하여 물류의 발착업무를 자동으로 수행하는 사례가 늘고 있다. 본 고는 우편집중국 발착장에 900MHz 대역의 RFID 시스템을 구축하기에 앞서, 시스템을 구성하는 주요 장비의 기능 및 성능을 사전에 검증하고 대상장비의 신뢰성을 제고하고 시간과 노력 및 비용을 줄이기 위해 BMT 를 실시한 내용을 기술한 것이다. BMT 의 주요 항목으로는, RFID 고정형 리더의 전파간섭시험, 주파수 호핑시험, 롤파렛 인식시험 등이었으며, 해당 장비의 기능 및 성능을 기술적으로 검증할 수 있었다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.8
• /
• pp.3351-3354
• /
• 2015

Background: Rhabdomyosarcoma (RMS) is the most common soft tissue sarcoma in the pediatric age group. All patients with RMS regardless of their initial stage or group receive combination chemotherapy as 'standard therapy' consisting of vincristine, actinomycin-D and cyclophosphamide. Actinomycin-D was not readily available in Turkey at one time. Carboplatin was used instead in order to prevent delays in treatment. The aim of this report is to present the results of patients with rhabdomyosarcoma receiving carboplatin or actinomycin-D therapy. Materials and Methods: Twenty four patients with rhabdomyosarcoma treated between December 2000 and June 2011 were included in this retrospective study. The patients were treated according to International Rhabdomyosarcoma Study Group guidelines. Eleven patients were treated with actinomycin-D and 13 with carboplatin ($250mg/m^2/dose$ for 2 days). The two groups were then compared in terms of 2- and 5-year overall survival (OS) and hematological and non-hematological toxicities. Results: Age, sex, stage and the mean duration of follow-up were similar in both groups (p>0.05). Two- and five-year OS levels were 68.2% in the carboplatin group and 78.0% and 40.0%, respectively, in the actinomycin-D group. There was no statistical difference in the number of febrile episodes (p=0.86) and no other hematological and non-hematological adverse effects were recorded in both groups. Conclusions: The findings show that carboplatin can be used as an alternative drug in the primary treatment of rhabdomyosarcoma in the event that actinomycin-D is unavailable or not tolerated.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.7
• /
• pp.305-310
• /
• 2002

The microwave dielectric properties of Ba(Mg$_{1}$3/Ta$_{2}$3/O$_3$-Ba(Co$_{1}$3/Nb$_{2}$3/O$_3$[BMT-BCN] ceramics were investigated. The specimens were prepared by the conventional mixed oxide method with the sintering temperature of 15$25^{\circ}C$~1575$^{\circ}C$. It was found that Ba(Mg$_{1}$3/Ta$_{2}$3/O$_3$[BMT] and BCN formed a solid solution with complex perovskite structure. As increasing the mole fraction of BCN, dielectric constant increased while the temperature coefficient of resonant frequency was changed from positive to negative value. The highest value of quality factor, Q$\times$f$_{0}$=138,205GHz, obtained in the 0.9BMT-0.1BCN ceramics sintered at 1575$^{\circ}C$. In the range of x$\geq$0.4, the dielectric constant was about 30. The 0.55BMT-0.45BCN ceramics sintered at 15$25^{\circ}C$ for 5 hours showed the microwave dielectric properties of $\varepsilon$$_{r}$=30.21, Q$\times$f$_{0}$=85,789GHz and $\tau$$_{f}$=2.9015ppm/$^{\circ}C$.EX>.