• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.53-63
• /
• 1992

M/BM -series catalysts, $MoO_3$ supported on ${\alpha}-Bi_2Mo_3O_{12}$ were also prepared by impregnation method. BM/M-series catalysts, ${\alpha}-Bi_2Mo_3O_{12}$ supported on $MoO_3$ were also prepared by coprecipitation. Structure and catalytic properties of the two phase catalysts were studied by means of using nitrogen adsorption, X-ray diffraction, and scanning electron microscopy. The reaction test for the selective oxidation of propylene to acrolein over Bi-molybdate catalysts was studied using a fixed-bed reactor system. In M/BM-series catalysts, $MoO_3$ was dispersed on ${\alpha}-Bi_2Mo_3O_{12}$, and the crystal structure of ${\alpha}-Bi_2Mo_3O_{12}$ remains unchanged by the presence of excess $MoO_3$. However the surface morphology and bulk structure of BM/M-series catalysts were altered probably because the precipitated $Bi(OH)_3$ reacted with $MoO_3$ during the calcination to form ${\alpha}-Bi_2Mo_3O_{12}$ phase. The results of propylene oxidation on both series catalysts showed that the reaction took place over the surface of ${\alpha}-Bi_2Mo_3O_{12}$ particle and the role of excess $MoO_3$ was to supply oxygen to ${\alpha}-Bi_2Mo_3O_{12}$. These increasing effects on activity were also observed in the mechanical mixtures of ${\alpha}-Bi_2Mo_3O_{12}$ and $MoO_3$.

• Korean Journal of Community Nutrition
• /
• v.10 no.4
• /
• pp.525-535
• /
• 2005

This study was conducted to investigate the effect of a 3 week low calorie diet (LCD) and a 9 week of behavior modification (BM) program on the weight loss, mineral and vitamin status in 22 obese women. The subject were healthy, obese (PIBW> $120\%$) women aged 20 - 50 Yr and not taking any medications known to influence body composition, mineral or vitamin metabolism During the LCD program, subjects were provided commercial liquid formulas with 125 kcal per pack and were instructed to have a formula for replacement of one meal and at least one regular meal per day within the range of daily 800 - 1200 kcal intake. During the BM program the subjects weekly attended the group nutrition counseling session to encourage themselves to modify their eating behavior and spontaneously restrict their energy intakes. The BM program focused on stimulus control, control of portion sizes and modification of binge eating and other adverse habits. The initial mean energy intake of subjects was 2016.9 $\pm$ 129.8 kcal ($100.8\%$ of RDA) and dropped to 1276.5 $\pm$ 435.7 kcal at the end of a 3 week of LCD program and elevated to 1762 $\pm$ 329.3 kcal at the end of a 9 week of BM program. Carbohydrate, protein and fat intakes were significantly decreased at the end of the LCD but carbohydrate was the only macro nutrient that showed significant decrease (p < 0.05) at the end of the BM program compared to baseline. Calcium and iron intakes decreased significantly (p < 0.01, respectively) with no significant changes in other micronutrients at the end of the LCD. The mean weight of the subjects decreased from 73.8 $\pm$ 8.0 kg to 69.2 $\pm$ 7.7 kg with LCD and ended up with 67.7 $\pm$ 7.1 kg after 9 weeks of BM. The 3 weeks of LCD reduced most of the anthropometric indices such as BMI, PIBW, fat weight, wast-to-hip ratio and subscapular and suprailiac skinfold thickness. The 9 weeks of behavior modification showed slight change or maintenance of each anthropometric measurements. Weight loss and decreased WHR with the diet program induced significantly decreased systolic blood pressure. SGOT, SGPT and serum insulin levels with improved serum lipid profiles. Biochemical parameters related to iron status such as hemoglobin, hematocrit were significantly decreased (p < 0.01) at the end of the LCD. But their mean values were within normal range. The mean serum 25 (OH) vitamin $D_3$ level significantly increased after whole diet program. Serum folate level significantly decreased after 12 weeks of diet program. In conclusion 3 weeks of LCD brought 4.6 kg reduction in body weight without risk of iron, zinc or vitamin D deficiency and 9 weeks of the BM was effective to maintain nutritional status with slightly more weight reduction (1.5 kg). However calcium intake and serum folate should be monitored during the LCD and BM because of increased risk of deficiencies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1193-1203
• /
• 2008

An active antenna(AA) can have wider bandwidth and more gain with small antenna size than those of passive antennas. However, AA inherently generates thermal noise and spurious signals from an active device. Moreover, the spurious performance of AA is very important in a highly sensitive receiving system since it is located at the front end of the receiving system. In this study, we developed an AA with $100{\sim}500\;MHz$, having the output P1dB higher than 3 dBm and little spurious signals in real environments. To achieve such performance, we designed an AA with 3-stage amplifier using CD(common drain) FET and 2 BJTs. Its electrical performances were simulated using ADS. The measurement results for typical gain, NF, OIP3, VSWR and P1dB in the required frequency band were 9.7 dBi, 10 dB, 14 dBm, 1.7:1 and 3 dBm respectively. They are in good agreement with simulation results. The unwanted spectrum level of the proposed AA is $10{\sim}30\;dB$ lower than that of the antenna with CS(common source) FET configuration at a west suburban area of Seoul, which shows that the proposed AA can be applicable to a highly sensitive receiving system for detecting unknown weak signals mixed with broadcasting and civilian communication signals.

• Publications of The Korean Astronomical Society
• /
• v.14 no.1
• /
• pp.39-45
• /
• 1999

We have carried out measurements of 1.2-1.6GHz radio interferences around Seoul Radio Astronomy Observatory located in the campus of Seoul National University. We received interference signals using a pyramidal horn antenna and measured its power using a spectrum analyzer with 1MHz resolution after $\~60dB$ amplification. In order to check the spatial characteristics, we made observations at every $30^{\circ}$ in azimuth at elevation of $30^{\circ}\;and\;60^{\circ}$. Also, in order to check the temporal characteristics, we repeated the all-sky observations five times at every six hours. The results may be summarized as follows: (1) There are strong $({\geq}-20dBm)$ interferences between 1.2 and 1.4GHz. Particularly strong interferences are observed at 1.271 and 1.281GHz, which have maximum powers of -0.34dBm and -0.56dBm, respectively. (2) The characteristics of the interferences do not depend strongly on directions, although the interferences are in general weak at high elevation and in east-west direction. (3) The interferences appear for a very short $(\leq0.01s)$ period of time, so that the average power is much smaller than the maximum power. Strong interferences with large $(\leq-49.0dBm)$ average power have been observed at 1.271, 1.281, 1.339, and 1.576GHz. At these frequencies, the interferences appear repeatedly with a period of $\leq0.1s$ By analyzing the observed power, we find that, for the strongest 1.271GHz interference, the average intensity is $-171dBW/m^2/Hz$ and that the maximum intensity is $-122dBW/m^2/Hz$. If this interference is delivered to the detector without any shielding, then its power would be much greater than the rms noise of a typical line spectrum. Therefore, it is important to shield all the parts of receiver carefully from radio interferences. Also, without appropriate shielding, the sensitivity of a receiver could be limited by the interference.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.580-585
• /
• 2005

Two high-efficiency and high power power-combing modules were developed using slotline-to-microstrip transition at V-band. Power-combining modules incorporating two MMIC power amplifiers demonstrated combining efficiencies higher than $80\%$(maximum $86\%$) with saturated output power of 22.96 dBm and 22.81 dBm, respectively. The measurement of back-to-back connected combiners demonstrated insertion loss less than 1.2 dB with return loss better than 15 dB around 60 GHz, respectively.

• BMB Reports
• /
• v.51 no.11
• /
• pp.545-546
• /
• 2018

With emerging evidence on the importance of non-cell autonomous toxicity in neurodegenerative diseases, therapeutic strategies targeting modulation of key immune cells. including microglia and Treg cells, have been designed for treatment of ALS and other neurodegenerative diseases. Strategy switching the patient's environment from a pro-inflammatory toxic to an anti-inflammatory, and neuroprotective condition, could be potential therapy for neurodegenerative diseases. Mesenchymal stem cells (MSCs) regulate innate and adaptive immune cells, through release of soluble factors such as $TGF-{\beta}$ and elevation of regulatory T cells (Tregs) and T helper-2 cells (Th2 cells), would play important roles, in the neuroprotective effect on motor neuronal cell death mechanisms in ALS. Single cycle of repeated intrathecal injections of BM-MSCs demonstrated a clinical benefit lasting at least 6 months, with safety, in ALS patients. Cytokine profiles of CSF provided evidence that BM-MSCs, have a role in switching from pro-inflammatory to anti-inflammatory conditions. Inverse correlation of $TGF-{\beta}1$ and MCP-1 levels, could be a potential biomarker to responsiveness. Thus, additional cycles of BM-MSC treatment are required, to confirm long-term efficacy and safety.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.506-511
• /
• 2011

In this paper, a rectenna for wireless power transmission at 900MHz is proposed. Rectenna is a device transforming RF power into DC power and it may consist of a antenna, rectifying and charging circuits. In this paper, we designed a slot antenna to receive 900MHz signal, a rectifying circuit of about 40% efficiency at 0dBm input, and a charging circuit to store a weak power signal and supply constant voltage to load. From the experiment using a RFID reader as a transmitter for 1W power, it was found that the proposed rectenna receiving about 0dBm power can supply 3.3V constant voltage to 50$k{\Omega}$ load during 280sec.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.522-529
• /
• 2002

MMIC circuits in whole receiver system was fabricated based on GaAs pHEMT technology. And a V-band downconverter module was fabricated by integrating these circuits. The downconverter module consists of a LO drive power amplifier which generates 24dBm output power, a low noise amplifier(LNA) which shows 20 dB small signal gain, an active parallel feedback oscillator which generates 1.6 dBm output power, and a cascode mixer which shows over 6dB conversion gain. The good conversion gain performance of our mixer made no need to attach any IF amplifier which grows conversion gain. Measured results of the complete downconverter show a conversion gain of over 20 dB between 57.5 GHz and 61.7GHz without IF amplifier.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.241-248
• /
• 2000

A linear power amplifier is particular emphasized on the CDMA system using a linear modulation scheme, because intermodulation distortion which cause adjacent channel interference and co channel interference is mostly generated in a nonlinear power amplifier. In this paper, a new type of linearization technique proposed. It is presented that balanced MESFET predistortion linearizer added. Experimental result are present for Korea PCS(Personal Communication Service) frequency band. The implemented linearizer is applied to a 30dBm class A power amplifier for simulation Performance. The predistortion linearizer improves the 1dB compression point of the HPA about 2dBm, and intermoudulation distortion about 12.5dBc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.686-693
• /
• 2001

In this paper, a new carrier complex power series which represents nonlinear transfer function of high power amplifier is derived. Using this transfer function, the nonlinear transfer function of predistortive circuit for linearizing the distortion effect of a HPA(High Power Amplifier) is derived and fabricated. A measured gain and $P_{1dB}$ of the fabricated HPA in IMT-2000 basestation transmitting band are 34.06 dB and 35.4 dBm. The predistortive circuit using inverse carrier complex power series is fabricated and operated with HPA. The predistortive HPA improves C/I(Carrier to Intermodulation) ratio of HPA by 17.01 dB(@Pout=25.43 dBm/tone) with 2-tone at 2.1375 GHz and 2.1425 GHz.