• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.183-187
• /
• 2020

The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, have not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, In this paper, especially, research on the convergency design for total inspection machine is treated. is treated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.720-725
• /
• 2009

Among many kinds of parts for Liquid Crystal Display (LCD), a Back Light Unit (BLU) that changes the path of the light from light source to screen is the most important part to improve optical performances such as uniformity and average value of brightness. Up to recently, design process of BLU has been carried out by depending on the experience of design engineer. Using this approach, however, is proven that it is hard to effectively deal with difficulties in a process of the LCD development such as frequent design modifications, various design requirements, and short-term development. To cope with this situation, we applied a Process Integration and Design Optimization (PIDO) based design environment. PIDO is a software package to integrate multiple simulation processes and find a better solution using various design techniques. In this research, we found a design solution satisfying all design requirements by using the PIDO.

• Korea-Australia Rheology Journal
• /
• v.19 no.3
• /
• pp.165-169
• /
• 2007

The light guide plate (LGP) of LCD-BLU (Liquid Crystal Display-Back Light Unit) is usually manufactured by forming numerous dots by etching process. However, the surface of those etched dots of LGP is very rough due to the characteristics of etching process, so that its light loss is relatively high due to the dispersion of light. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched-dot patterned LGP, micro-lens pattern was tested to investigate the possibility of replacing etched pattern in the present study. The micro-lens pattern fabricated by the modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different optical pattern type (i.e. etched dot, micro-lens). Finally, the micro-lens patterned LGP showed better optical qualities than the one made by the etched-dot patterned LGP in luminance.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.491-499
• /
• 2020

The implementation of PPK-BLU in Indonesia was not followed by a comprehensive change in aspects of organization, human resources, and finance. Based on this background, this study aims to provide a comprehensive evaluation of the BTIP after the implementation of the PPK-BLU policy in the implementation of telecommunications services and information to the public in Indonesia. This research used integration of the McKinsey 7S method, Analytical Hierarchy Process, and Likert scale. The integration of these methods can provide a detailed quantitative analysis. Based on the overall evaluation results of carrying out the PPK BLU, BTIP has a performance value of 81.195%, which puts it within the Good category. The McKinsey 7S elements used as a whole have the following values: one aspect is categorized as Very Good, namely, the strategy aspect with a value of 91.025%; two aspects are categorized as Good (structural aspects with a value of 86.857%, and skill aspects with a value of 81.432%); three aspects are categorized as Adequate (style aspect with a value of 76.441%, staff aspect with a value of 78.605%, and share value aspect with a value of 76.331%); one aspect is categorized as Bad, that is the system aspect with a value of 67.503%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.292-300
• /
• 2009

This paper presents an LED BLU driving circuit with a local-dimming structure. The efficiency of the proposed LED driver has been improved by parallel driving 8 serial-connected LED arrays. It employed the soft-switching boost converter topology to reduce the switching power loss of the hard switching boost converter. Soft- and hard-switching converters have the same structure except that the free-wheeling diode in the hard-switching converter is replaced with the n-channel MOSFET in the soft-switching one. The proposed boost converter was compared with the hard switching converter. The soft-switching converter reveals superior ripple and efficiency. A smaller inductance can be used for the soft-switching converter contrasting to the hard-switching one. We also studied on an over-voltage protection circuit of the output of the driver at the no load condition. The protection circuit was applied to the proposed driver, and its operation was confirmed by experiment. Using a local-dimming technique, power consumption of LCD BLUs can be reduced as low as possible according to the brightness of its image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8B
• /
• pp.1204-1210
• /
• 2010

In this paper, in order to reduce the power consumption of LCD TV, we present a two-dimensional dimming algorithm for LED BLU(Backlight Unit) using light spread function and a pragmatic implementation method. In conventional two dimensional dimming algorithms, LED BLU is divided into MxN blocks and proper backlight luminance for each block is computed according to input image and used for dimming control. But, LED light of each block is diffused and affects the neighboring blocks so that luminance of each block becomes larger than that of intent. In the proposed algorithm, dimming control values are reduced by the amount of quantity affected by the neighboring blocks using light spread function, resulting in additional reduction of power consumption.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1665-1666
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display)는 표시장치로서 실용화된 후 많은 상품에 적용중이다. 그러나, LCD는 자체 발광능력이 없으므로 그후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU는 내부 광원으로 밝기가 균일한 평면광을 만들어 LCD 화면을 균일하게 면조사하는 역할을 한다. LCD가 적용되는 분야중 Note PC에는 광원으로 CCFL(Cold Cathode Fluorescent Lamp)가 적용되어 왔지만, 최근 고휘도, 박형화, 저소비 전력을 달성하기 위해 CCFL로는 한계가 있어 LED(Light Emitting Diode)를 적용한 BLU를 제작하기 위한 연구가 진행되고 있다. 본 연구에서는 점광원인 LED 적용한 LED에 있어서 요구되는 휘도 균일성을 향상시키기 위해서는 LED광원이 적용된 BLU의 외관 품질 향상을 위한 도광판 입광부 구조 최적화를 광추적 Simulation을 통해 예측하고 향상시킬 수 있는 구조를 제안한다. Simulation결과, 외관품질 개선을 위해 도광판 입광면에 130도의 Serration과 휘도를 향상하기 위해 도광판 밑면에 렌즈 형상의 바 구조를 도출해 적용한 결과 외관품질향상과 휘도향상을 얻었다.

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.197-201
• /
• 2020

The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, did not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, research on design and manufacturing of JIG and Fixture for molybdenum pin manufacturing and inspection is treated.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.14-21
• /
• 2011

The plasma emission characteristics are investigated in cylindrical syringe plasma jet device. Cylindrical syringe electrode is applied AC power using inverter. In the center of syringe is injected into a inert gas and plasma jet occurs. If there is no ground electrode, firing voltage is 3 kV and plasma column length is 10 mm. According to high firing voltage and large current, the plasma column length control is difficult. The case of an internal ground electrode, firing voltage is 1 kV. Because of the losing current from internal ground, even if a higher input voltage, plasma emission does not occur. The case of an external ground electrode, the plasma column can be controlled between 0~10 mm with change the applied voltage from 1 to 2 kV, and the discharging current changed from 1 to 4 mA.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.19-24
• /
• 2004

A novel fast parallel NTGST is proposed for high resolution computer vision inspection of the BLUs in a LCD production line. The conventional computation- intensive NTGST algorithm is modified and its C codes are optimized into fast NTGST to be adapted to the SIMD parallel architecture. And then, the input inspection image is partitioned and allocated to each of the P processors in multi-threaded implementation, and the NTGST is executed on SIMD architecture of N data items simultaneously in each thread. Thus, the proposed inspection system can achieve the speedup of O(NP). Experiments using Dual-Pentium III processor with its MMX and extended MMX SIMD technology show that the proposed parallel NTGST is about Sp=8 times faster than the conventional NTGST, which shows the scalability of the proposed system implementation for the fast, high resolution computer vision inspection of the various sized BLUs in LCD production lines.