• Journal of the Korea Society of Computer and Information
• /
• v.24 no.11
• /
• pp.179-185
• /
• 2019

In this paper, We purpose the basic data for the success of effective CPR using mirror in order to increase the quality of chest compression during CPR. The subject of this study was an experimental study based on a randomized crossover design of 28 people who completed the BLS Health Care Provider, and collected data were analyzed by SPSS Ver. 23.0 for Win statistics program. As the research methods, depth, speed, compression to relaxation ratio, arm angle and easiness during the chest compression were measured. Taken together, the results of this study showed that using a mirror-based chest compression method for chest compressions in adult CPR could make chest compressions easier, in addition, the quality of breast compression was improved by improving the posture of the rescuers, such as the average depth of compression, compression to relaxation ratio, and arm angle. However, it is necessary to confirm the feasibility of clinical application through additional studies on various environmental factors and job groups for mirror-based chest compression method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.2
• /
• pp.128-133
• /
• 2008

Phase-change random access memory (PRAM) chip cell phase of amorphous state is rapidly changed to crystal state above 160 Celsius degree within several seconds during Infrared (IR) reflow. Thus, on-board programming method is considered for PRAM chip programming. We demonstrated the functional 512Mb PRAM with 90nm technology using several novel core circuits, such as metal-2 line based global row decoding scheme, PN-diode cells based BL discharge (BLDIS) scheme, and PMOS switch based column decoding scheme. The reverse-state standby current of each PRAM cell is near 10 pA range. The total leak current of 512Mb PRAM chip in standby mode on discharging state can be more than 5 mA. Thus in the proposed BLDIS control, all bitlines (BLs) are in floating state in standby mode, then in active mode, the activated BLs are discharged to low level in the early timing of the active period by the short pulse BLDIS control timing operation. In the conventional sense amplifier, the simultaneous switching activation timing operation invokes the large coupling noise between the VSAREF node and the inner amplification nodes of the sense amplifiers. The coupling noise at VSAREF degrades the sensing voltage margin of the conventional sense amplifier. The merit of the proposed sense amplifier is almost removing the coupling noise at VSAREF from sharing with other sense amplifiers.

• Journal of the Korean Home Economics Association
• /
• v.35 no.2
• /
• pp.333-344
• /
• 1997

The purpose of this study was to investigate new method to incorporate demographic variables into demand models through modifying the theory in an attempt to capture interactions between individuals within a household. The method which utilizes household equivalence scale was very attractive in the sense that it provide less restrictive implications for the behavior model, and thus, the estimated expenditure elasticities might be more realistic because demographic variables are more elaborately controlled. the household equivalence scaled was developed using Lagrange Interpolation Polynomials. Then the empirical model with household equivalence scale was derived based on the model of Deaton and Muellbauer. For its empirical utilization, Consumer Expenditure survey(CES) conducted by the bureau of Labor Statistics(BLS) was used.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2847-2851
• /
• 2020

A simple water level measurement method based on wavelength division multiplexing (WDM) is proposed and demonstrated. The measurement principle is based on the change of Fresnel reflection occurring at the end facet of the optical fiber tip (OFT). To increase the spatial resolution of water level sensing, a broadband light source (BLS) and an arrayed waveguide grating (AWG) are employed. The OFTs are multiplexed with the dedicated wavelength channels of AWG. By measuring all of the reflection powers reflected at the OFTs with a proposed on-site reflectometer, the water level can be monitored continuously for a fast emergency response. Moreover, it can be implemented easily with the commercially available optical components and devices with the simple configuration.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.18-23
• /
• 2010

The RLS (Recursive Least Squares) method is a broadly used adaptive algorithm for signal processing in electronic engineering. The RLS algorithm shows a good performance and a fast adaptation within a stationary environment, but it shows a Poor performance within a non-stationary environment because the method has a fixed forgetting factor. In order to enhance 'tracking' performances, BLS methods with an adaptive forgetting factor had been developed. This method shows a good tracking performance, however, it suffers from heavy computational loads. Therefore, we propose a modified AFF-RLS which has relatively low complexity m this paper.

• Journal of the Korean Society for information Management
• /
• v.24 no.2
• /
• pp.161-179
• /
• 2007

As increasingly diverse kinds of information materials are available on the Internet, it becomes a challenge to define an adequate level of metadata provision for each different type of material in the context of digital libraries. This study explores issues of metadata provision for a particular type of material, statistical tables. Statistical data always involves numbers and numeric values which should be interpreted with an understanding of underlying concepts and constructs. Because of the unique data characteristics, metadata in the statistical domain is essential not only for finding and discovering relevant data, but also for understanding and using the data found. However, in statistical metadata research, more emphasis has been put on the question of what metadata is necessary for processing the data and less on what metadata should be presented to users. In this study, a case study was conducted to gauge the status of metadata provision for statistical tables on the Internet. The websites of two federal statistical agencies in the United States were selected and a content analysis method was used for that purpose. The result showing insufficient and inconsistent provision of metadata demonstrate the need for more discussions on statistical metadata from the ordinary web users' perspective.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.15 no.2
• /
• pp.143-152
• /
• 2008

Purpose: A survey was done on knowledge and attitude toward CPR and provision of CPR education to nurses on general wards. Method: A survey of 280 nurses on general wards in four university hospitals with 700 beds or more in the city of Pusan was done. The data were collected from September 10, to September 22, 2007. Results: The mean score for knowledge of Basic Life Support was 12.71 (mean converted to 100: 63). About 76% of the nurses believed that they had a responsibility to perform CPR, but 53.3% of the nurses were not confident to perform CPR. About 94% of the nurses had received education on CPR but 32.3% of those took it 6 to 12 years ago. About 41% of the nurses spent 3-4 hours for the education and 73.2% of those took simulation education. Conclusion: Although most of the nurses had received CPR education, they were not knowledgeable or confident. Therefore, better CPR education programs including up-dated knowledge are needed. More reinforced education should be offered every six months or on a yearly basis in order to enhance lasting efficiency.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.16 no.1
• /
• pp.121-128
• /
• 2010

Purpose: Bystander CPR has demonstrated improved survival of out-of-hospital cardiac arrest. The purpose of this study was to evaluate the effects of CPR education in the rural community. Method: One hundred eighty-nine rural laypersons (105 in the experimental group and 84 in the control group) participated in this study. In the experimental group, questionnaires were completed after participating in a small group BLS (Basic Life Support) course. In the control group questionnaires were collected from two rural health service centers. Data were analysed using $X^2$test, independent t-test and paired t-test. Result: There were significant differences in barriers to performing CPR, attitude and intention toward CPR and necessity recognition between the two groups. Conclusion: The proportion of positive attitudes toward CPR and willingness to perform CPR was higher in the experimental group than the control group. CPR education increased anxiety of being sued because of a bad outcome. For future CPR education for laypersons, the reluctance of bystanders to perform CPR should be reconsidered and CPR education should be extended to the rural community.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.12a
• /
• pp.7-8
• /
• 2011

Although yttrium iron garnet (YIG) has provided a great vehicle for the study of spin waves in the past, associated difficulties in film deposition and device fabrication using YIG had limited the applicability of spin waves to practical devices. However, microfabrication techniques have made it possible to characterize both the resonant as well as the travelling characteristics of spin waves in permalloy (Py). A variety of methods have been used for measuring spin waves, including Brillouin light scattering (BLS), magneto-optic Kerr effect (MOKE), vector network analyzer ferromagnetic resonance (VNA-FMR), and pulse inductive microwave magnetometry (PIMM). PIMM is one of the most preferred methodologies of measuring travelling spin waves. In this method, an electrical impulse is applied at one of two coplanar waveguides patterned on top of oxide-insulated Py, producing a local disturbance in the magnetization of the Py. The resulting disturbance travels down the Py in the form of waves, and is inductively picked up by the other coplanar waveguide. We investigate the effect of the pulse width of excitation pulses on the generated spin wave packets using both experimental results and micromagnetic simulations. We show that spin wave packets generated from electrical pulses are a superposition of two separate spin wave packets, one generated from the rising edge and the other from the falling edge, which interfere either constructively or destructively with one another, depending upon the magnitude and direction of the field bias conditions. A method of spin wave amplitude modulation is also presented by the linear superposition of spin waves. We use interfering spin waves resulting from two closely spaced voltage impulses for the modulation of the magnitude of the resultant spin wave packets.

• Korea journal of population studies
• /
• v.29 no.3
• /
• pp.51-72
• /
• 2006

In Korea, most studies have used the conventional Wolfbein and Wool method, which cannot be applied to women's work-life table because of bimodality and/or M curve of female labor force participation. The increment/decrement work-life table method, however, is equally applicable to both men and women, but requires individual data on employment transition. This paper demonstrates that the Garfinkle-Pollard method is the same as the increment/decrement work-life table method developed by Hoem, Schoen and Woodrow and adopted by BLS. The merit of Garfinkle-Pollard method is to produce work-life table using labor force participation rate without individual employment transition. This paper applies the Garfinkle-Pollard methods to the estimation and projection of work-life of Korean labor force for the period of 2000-2050, using the abridged life tables provided by Korean National Statistical Office and a projection of labor force participation rates. The work-life expectancy at 65 is 5.8 years for men and 4.1 years for women in 2000, and it increased to 7.7 years for men and 5.1 years in 2050. However, differences in work-life expectancy are found depending on the data processing of elderly labor force participation and mortality assumption. Detailed data on elderly labor force participation and further study on future mortality are required to estimate and project more accurate work-life expectancy.