• ETRI Journal
• /
• v.42 no.3
• /
• pp.351-365
• /
• 2020

Directional sensor networks (DSNs) can significantly improve the performance of a network by employing energy efficient communication protocols. Neighbor discovery is a vital part of medium access control (MAC) and routing protocol, which influences the establishment of communication between neighboring nodes. Neighbor discovery is a challenging task in DSNs due to the limited coverage provided by directional antennas. Furthermore, in these networks, communication can only take place when the beams of the directional antennas are pointed toward each other. In this article, we propose a novel multiple token-based neighbor discovery (MuND) protocol, in which multiple tokens are transmitted based on an area exploration algorithm. The performance of the protocol is evaluated using the Cooja simulator. The simulation results reveal that the proposed MuND protocol achieves lower neighbor discovery latency, with a 100% neighbor discovery ratio, and has a relatively low communication overhead and low energy consumption.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.93-105
• /
• 2001

In the lossless step of Lattice Vector Quantization(LVQ), the lattice codewords produced at quantization step are enumerated into radius sequence and index sequence. The radius sequence is run-length coded and then entropy coded, and the index sequence is represented by fixed length binary bits. As bit rate increases, the index bit linearly increases and deteriorates the coding performances. To reduce the index bits across the wide range of bit rates, we developed a novel lattice enumeration algorithm adopting the set partitioning method. The proposed enumeration method shifts down large index values to smaller ones and so reduces the index bits. When the proposed lossless coding scheme is applied to a wavelet based image coding, the proposed scheme achieves more than 10% at bit rates higher than 0.3 bits/pixel over the conventional lossless coding method, and yields more improvement as bit rate becomes higher.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.04a
• /
• pp.65.1-70
• /
• 2000

최근 인터넷 사용자의 증가와 인터넷을 이용한 전자상거래가 활발해지면서 TCP/IP 통신 보안에대한 많은 연구들이 진행되고 있다. 이러한 연구들중 SSL(Secure Socket Layer) 은 인증 및 보안 프로토콜로서 인터넷을 이용한 통신 보안에 가장 많이 사용되고있는 방법이다. 본 논문에서는 국내 암호 알고리즘의 표준으로 채택된 SEED 알고리즘을 SSL에 적용하여 서버와 클라이언트의 통신을 128bits 암호화할 수 있는 SSL-Proxy 프로그램을 구현하였으며, Windows 와 Unix 시스템에 모두 적용 가능하도록 모듈화하였다.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.607-611
• /
• 1988

In this paper, a text compression method is proposed which is capable of reducing mean bits per character by word and etymology dictionary. This dictionary consists of 256 words and 512 etymologies with 10 bits length codes. Using this dictionary, a mean rate of 3.44 bits per character is achieved.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2930-2936
• /
• 2012

A three-dimensional pharmacophore hypothesis was developed for atypical antipsychotics in order to map common structural features of highly active compounds by using HipHop in CATALYST program. The pharmacophore hypotheses were generated using 12 compounds as training set and validated using 11 compounds as test set. The most predictive hypothesis (Hypo1) comprises five features viz. two hydrophobic regions, two hydrogen bond acceptor lipid and one aromatic ring. In the absence of information like crystallized structure of 5-$HT_{2A}$ receptor and binding mode of antipsychotics with 5-$HT_{2A}$ receptor, this hypothesis will serve as a potentially valuable tool in the design of novel atypical antipsychotics acting primarily at 5-$HT_{2A}$ and $D_2$ receptors.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.69-72
• /
• 2000

This paper shows the more improved design of MRI receiver compared to conventional one based on Elscint Spectrometer. At first, the low-cost ADC is 16 bits, 3MHz sampling A/D converter Comparing to conventional one with signal bits of 14 bits, this device with those of 16 bits helps getting Improved the image resolution improved. If frequency is designed centering around 7.6 MHz to be satisfied in 10 MHz of maximum input bandwidth of ADC. For 1st demodulation, fixed IF is used for the purpose of the implementing multi nuclei system. Control parts & partial digital parts are integrated on one chip(FPGA). In DDC(Digital Down Converter), we got required bandwidth of LPF by controlling its decimation rate. With above considerations, we designed optimal receiver for high resolution imaging to be implemented through PC interface & experimental test of receiver of MRI after receiver's fabrication.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.101-104
• /
• 2000

An efficient bit rate distribution technique that distributes available bits for multiple objects based on motion vector magnitude, size of object shape, and coding distortion is presented. This coding concept using the three parameters was exploited in MPEG-4 multiple object coding. But the scheme is likely to produce poor results such as allocating more bits to less important objects and degrading picture quality, due to the lack of analysis and research in view of human visual aspect. In this paper importance of each object is represented by the three parameters and visually analyzed. Target bits are distributed according to coding distortion using the pre-assigned shape and motion information.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.171-174
• /
• 2014

In weighted bit-flipping-based algorithms for low-density parity-check (LDPC) codes, due to the existence of overconfident incorrectly received bits, the metric values of the corresponding bits will always be wrong in the decoding process. Since these bits cannot be flipped, decoding failure results. To solve this problem, an improved parallel weighted bit flipping algorithm is proposed. Specifically, a reliability-saturation strategy is adopted to increase the flipping probability of the overconfident incorrectly received bits. Simulation results show that the error floor of LDPC codes is greatly lowered.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1085-1093
• /
• 2000

An efficient bit rate distribution technique that distributes available bits for multiple objects based on motion vector magnitude, size of object shape, and coding distortion is presented. This coding concept using the three parameters was exploited in MPEG-4 multiple object coding. But the scheme is likely to produce poor results such as allocating more bits to less important objects and degrading picture quality, due to the lack of analysis and research in view of human visual aspect. In this paper importance of each object is represented by the three parameters and visually analyzed. Target bits are distributed according to coding distortion using the pre-assigned shape and motion information.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.445-454
• /
• 2015

As the feature sizes and the operating charges continue to be scaled down, multi-bit soft errors are becoming more critical in SRAM designs of a few nanometers. In this paper, we propose an efficient error detection technique to reduce the size of parity bits by applying a 2D bit-interleaving technique to 3D bit-partitioned SRAM devices. Our proposed bit-interleaving technique uses only 1/K (where K is the number of dies) parity bits, compared with conventional bit-interleaving structures. Our simulation results show that 1/K parity bits are needed with only a 0.024-0.036% detection error increased over that of the existing bit-interleaving method. It is also possible for our technique to improve the burst error coverage, by adding more parity bits.